Class B Driving Test | New Hampshire 2024 #1 Page 4 of 7
Train for FREE online with our New Hampshire class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NH CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
22 . After driving over a bridge during the driving skills test, you may be asked to recall.
If you drive over a bridge during the on-road driving skills test, the examiner may ask you afterwards to recall the bridge's posted weight limit.
23 . If you are turning left where there are two available turning lanes:
If making a left turn where there is more than one available turn lane, you should always choose to take the rightmost lane. Large vehicles often have to swing right to make left turns, so it is safer for you to have other left-turning traffic to your left. This will allow you to have the best possible view of other turning vehicles and will lower the risk of your vehicle colliding with them.
24 . If wheel bearing seals are leaking, you should:
When inspecting a vehicle, you should ensure that the wheel bearing seals are not leaking. If you find anything unsafe during the vehicle inspection, get it fixed. Federal and state laws forbid operating an unsafe vehicle.
25 . How should you brake if your vehicle loses its ABS?
An Anti-Lock Braking System (ABS) is in place as an addition to a braking system. It intervenes to prevent brakes from locking up during hard braking. If ABS is not working, the basic braking functions on a vehicle will still remain, so the driver can continue to drive and brake normally.
26 . Braking mechanisms are located inside:
Drum brakes are attached to the wheels and located on the axles of a vehicle. The braking mechanisms that cause the vehicle to stop can be found inside of a drum brake.
27 . To correct a drive-wheel braking skid, a driver should do all of the following, except:
To correct a drive-wheel braking skid, you should first remove your foot from the brake pedal to allow the locked wheels to begin rolling again. Quickly steer in the direction you want to go, then countersteer to prevent your vehicle from skidding in the opposite direction.
28 . When traction is poor, a driver should accelerate slowly:
Speeding up too quickly on a road with poor traction could cause a driver to lose control of their vehicle. In conditions that cause poor traction, a driver should accelerate especially smoothly and gradually.
See the exact questions that will be on the 2024 New Hampshire DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.