Knowledge Test Class B #1
Class B Driving Test | Indiana 2025 #1 Page 2 of 7
Train for FREE online with our Indiana class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a IN CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
8 . What color is the low air pressure warning light?
Purple
A low air pressure warning signal is required in vehicles with air brakes. The warning light is usually red and may be accompanied by a buzzer.
9 . What is traction?
A fuel stop
Friction between the tires and the road is referred to as traction. Traction is necessary to steer or brake a vehicle.
10 . How can you prevent drowsiness before a trip?
Schedule long trips at night.
To prevent drowsiness on a long trip, strategies include getting adequate sleep beforehand; planning out the route and stopping points in advance; driving with a passenger; and driving at times during which you are normally awake.
11 . During an applied leakage test, the maximum leakage rate for a triple combination vehicle is:
4 psi in a minute.
It is important to know the maximum air loss rate that is safe for your specific vehicle. A triple combination should have a leakage rate no higher than 6 psi in a minute during an applied leakage test.
12 . If a person has a hazardous materials endorsement and renounces their U.S. citizenship:
They must surrender their hazardous materials endorsement within 24 hours.
If applicable, you must surrender your hazardous materials endorsement within 24 hours of renouncing your U.S. citizenship.
13 . Headlights:
Should always be on the high beam setting.
To improve visibility, you should use high beam headlights at night where it is safe and legal to do so. However, the glare from high beam lights can blind other drivers. You should dim your lights to their low beam setting when driving within 500 feet of an approaching vehicle.
14 . Which of the following is acceptable?
Tires with cracks
When inspecting a vehicle, you should ensure that dual tires do not come into contact with each other or with other parts of the vehicle. Tire sizes should not be mismatched, and tires should not be cut or damaged in any way. Regrooved, recapped, or retreaded tires are not permitted to be used on the front wheels of a bus.
See the exact questions that will be on the 2025 Indiana DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Indiana | Frequently Asked Questions
To acquire a CDL Tank endorsement in Indiana, you must first have a Commercial Driver's License (CDL). Next, study the Indiana CDL handbook section on tank vehicles. Then, schedule and pass the Tank Vehicle Endorsement Knowledge Test at a BMV branch. Lastly, pay the required fee to add the endorsement to your license.
To obtain a CDL Tank license, it's essential to have a valid Commercial Driver's License (CDL). You must also pass the Tank Vehicle Endorsement Knowledge Test, which covers the special driving rules and techniques for tank vehicles. Studying the relevant section in the Indiana CDL manual can help prepare for this test.
While specific training isn't mandatory for a CDL Tank endorsement in Indiana, it's highly recommended. Having a solid understanding of the Indiana CDL handbook section on tank vehicles is crucial. Prior experience isn't required, but practicing with a professional driver or attending a driving school can increase your chances of passing the endorsement test.
Yes, in Indiana, to obtain a CDL Tank endorsement, you are required to pass the Tank Vehicle Endorsement Knowledge Test. This test is in addition to the general CDL knowledge and skills tests. Studying the tank vehicle section of the Indiana CDL handbook is crucial to pass this written test.
The written test for the CDL Tank endorsement in Indiana includes subjects like inspecting tank vehicles, driving tank vehicles, and safe driving rules specific to tank vehicles. It also covers the effects of liquid surge on vehicle handling, and knowledge about bulkheads and baffles. Studying these topics will help you pass the test.
The CDL Tank endorsement assessment in Indiana primarily focuses on knowledge rather than specific driving maneuvers. It tests your understanding of inspecting tank vehicles, driving them safely, handling liquid surge, and the function of bulkheads and baffles. However, the general CDL skills test will assess your actual driving abilities.
Yes, drivers with a CDL Tank endorsement must adhere to certain regulations. They must pass regular drug and alcohol tests, maintain a clean driving record, and follow hours-of-service regulations. Additionally, they must comply with special procedures for loading and unloading cargo, and avoid certain routes, like roads with low bridges or tunnels, due to the vehicle's size.
No, drivers cannot legally transport liquid or gas materials without a valid CDL Tank endorsement in Indiana. This endorsement is specifically required for operating a tank vehicle, which is defined as any commercial motor vehicle designed to transport any liquid or gaseous materials within a tank either permanently or temporarily attached to the vehicle.
Yes, the CDL Tank endorsement can be added to your current license. A fresh application isn't necessary. You need to pass the Indiana CDL Tank Vehicle written test, and once you do, the endorsement will be added to your existing CDL. Remember, there may be additional fees for adding endorsements.
Yes, there are specific regulations and prerequisites in place for handling hazardous materials with a CDL Tank endorsement in Indiana. These include passing a written test, undergoing a background check, obtaining a Transportation Security Administration (TSA) clearance, and completing specialized training on the safe handling and transportation of hazardous materials. Compliance with federal regulations, such as those outlined in the Hazardous Materials Regulations (HMR), is also required.
