Minnesota Driver's Examination

Knowledge Test Class A #1

FREE CDL Class A Driving Test Online Minnesota 2024

Train for FREE online with our Minnesota class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Practice the types of questions found in the Minnesota Commercial Driver's Manual to become a safer driver in Minnesota.
These 50 multiple-choice questions cover a wide range of topics, including road conditions, Minnesota state laws on driving under the influence and CDLs, traffic, safe driving tactics, and more.
Practice until you achieve a perfect score, and drive safely!

Ideal for:

CDL holders who want to add endorsements to their license
First-time MN CDL and CLP applicants
Applicants for CDL renewal in MN

On the actual MN CDL exam:

There are 50 questions
To pass, you must get 40 right answers
80% passing score

Number of Question 50

Passing Score 40

Number of Tests 20

1 . Which of the following is not required emergency equipment?

Three red reflective triangles

A fire extinguisher

A loud horn

All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.

2 . When checking windshield wiper blades, they should be:

Soft.

Secure.

Brittle.

When inspecting your vehicle, you should check the wiper blades for damage, stiff rubber, and proper securement. Clean the blades if they are dirty.

3 . If a vehicle has a vehicle inspection report, the driver:

Should not look at the report and instead try to find any issues themselves.

Should take the vehicle to a mechanic.

Should review the report.

Should not conduct a pre-trip inspection and rely only on the report.

For the first step of a vehicle inspection, you should review the last inspection report on your vehicle, if there is one. The carrier should have repaired any problems noted on the report.

4 . When entering a curve, you should:

Get off the roadway.

Use the shoulder.

Downshift.

Take the vehicle out of gear.

Always reduce your speed and downshift before entering a curve.

5 . A major cause of fatal crashes is:

Inappropriately honking a horn.

Driving too fast for conditions.

Following a large vehicle.

Driving too fast is a major cause of fatal crashes. A driver should always be ready to adjust their speed to changing driving conditions.

6 . When approaching a railroad crossing, you should:

Rely on warning signals to indicate if a train is approaching.

Rely on the actions of other motorists to indicate if a train is approaching.

Not rely solely on warning signals to indicate if a train is approaching.

You should not rely solely upon the presence of warning signals, gates, or flaggers to alert you to the approach of a train. Be especially alert to approaching trains at crossings that are not controlled by gates or signals. At any railroad crossing, you should operate under the assumption that a train is coming.

7 . What should happen before the air pressure in an air brake system tank falls below 55 psi?

The warning light should activate.

The vehicle will be unable to shift out of gear.

The front lights should flash.

The low air pressure warning signal must activate before the air supply pressure drops below 55 psi in the air tank. If the warning signal does not turn on when being tested during an inspection, the vehicle is not safe to drive.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your MN DMV Written Test Get Your MN DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.46 out of 5 based on 202 votes

2024 Minnesota | Frequently Asked Questions

A CDL Class A license in Minnesota is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle is heavier than 10,000 pounds. It typically covers vehicles like tractor-trailers, truck and trailer combinations, and tank vehicles.

A Class A CDL license in Minnesota allows the holder to operate several types of heavy vehicles. These include tractor-trailers, truck and trailer combinations, tank vehicles, and livestock carriers. The license permits driving any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 or more pounds, provided the towed vehicle exceeds 10,000 pounds.

To obtain a Class A CDL license in Minnesota, one must be at least 18 years old (21 for interstate travel), possess a valid Minnesota driver's license, pass a vision test, and successfully complete a general knowledge test. Additionally, applicants must pass skills tests in the vehicle type that the driver expects to operate. Medical examinations are also typically required.

In Minnesota, you must be at least 18 years old to apply for a Class A CDL for intrastate transport (within Minnesota only). However, federal regulations require drivers to be at least 21 years old to drive commercial vehicles across state lines (interstate transport) or to transport hazardous materials.

While not necessarily required, specific endorsements on a Class A CDL license can expand the types of vehicles you're allowed to drive and the cargo you can carry. These include T for Double/Triple Trailers, P for Passenger Vehicles, N for Tank Vehicles, H for Hazardous Materials, and S for School Buses. Each endorsement requires passing additional tests.

The Class A CDL skills test in Minnesota comprises three parts: pre-trip inspection, basic vehicle control, and on-road driving. The pre-trip inspection checks your ability to assess the condition of your vehicle. Basic vehicle control tests your skills in controlling the vehicle, and on-road driving evaluates your ability to drive safely in various road conditions.

Yes, limitations can be imposed on Class A CDL license holders in Minnesota. These are known as restrictions, and they limit the type of vehicle you can operate or require you to use certain equipment. Examples include 'E' for no manual transmission, 'K' for intrastate only, 'L' for no air brake equipped CMV, 'M' and 'N' for class of vehicle restrictions, and 'O' for no tractor-trailer CMV.

Yes, in Minnesota, the written Class A CDL test can be taken in several languages besides English. These include Spanish, Hmong, Vietnamese, Russian, and Somali. However, the state requires that all CDL holders be able to read and speak English well enough to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.

Yes, Minnesota allows accommodations for the Class A CDL written test for individuals with disabilities. You need to make this request in advance when scheduling your test. Accommodations can include more time to take the test, a separate room, or having the test read aloud. However, all requests are subject to approval and must comply with federal regulations.

Yes, if you don't pass the Class A CDL written test in Minnesota, you can retake it. However, you must wait until the next day to do so. The state allows multiple attempts, but each retest requires a new fee. Remember to study thoroughly using the Minnesota Commercial Driver’s Manual before retaking the test.