Double Triple Test | Washington 2026 #2

Train for FREE with our Washington CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL double triple license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . A broken exhaust system:

Can allow poisonous fumes to enter the cabin.

Does not cause problems.

Should not be a concern.

A broken exhaust system can let poisonous fumes into a vehicle's cab or sleeper berth. Be sure to inspect your exhaust system for any loose, broken, or missing parts.

2 . Regrooved tires are:

Allowed only on the front of a bus.

Allowed only on the rear of a bus.

Not allowed anywhere on a bus.

Regrooved, recapped, or retreaded tires are not permitted to be used on the front of a bus.

3 . When backing with a trailer, turning toward the driver’s side is encouraged because:

The driver will have the best possible view.

Power lines should be on the passenger's side.

Other drivers can offer assistance on the passenger's side.

When driving in reverse, it is always recommended that a driver backs their vehicle toward its left side. This will allow the driver the best possible view of the rear of their vehicle.

4 . Regrooved tires:

Should not be used on any vehicle.

Should not be used on the front of a bus.

Should not be used on trucks hauling gravel.

Regrooved, recapped, or retreaded tires are prohibited on the front wheels of a bus.

5 . Older trailers are not equipped with spring brakes. This means that if the air supply for a vehicle's air braking system leaks away:

The trailer will stop normally.

The trailer will not have brakes.

The trailer will speed up.

Older trailers do not have spring brakes. This means that if the air supply in an older trailer's air tank has leaked away, there will be no working brakes connected to the trailer and its wheels will turn freely.

6 . A dual air brake system:

Consists of two separate air brake systems that share a single set of controls.

Is a single air brake system with two different sets of controls.

Consists of one air brake system for the left side of the truck and one system for the right side of the truck, each with its own set of controls.

A dual air brake system is made up of two separate air brake systems. The systems share a single set of brake controls, but each has its own air tanks, hoses, and lines. One system typically operates the regular brakes on the rear axle or axles while the other system operates the regular brakes on the front axle.

7 . A low air pressure warning signal should activate:

When tank pressure falls below 120 psi.

When tank pressure falls below 60 psi.

When tank pressure falls below 10 psi.

In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2026 Washington | Frequently Asked Questions

To obtain a CDL Tank endorsement in Washington, you first need a Commercial Driver's License (CDL). Then, study the "Transporting Cargo Safely" section of the Washington CDL manual. After studying, take the written tank vehicle test at a Department of Licensing office. If you pass, the tank endorsement will be added to your CDL.

To obtain a CDL Tank license, you first need a basic Commercial Driver's License (CDL). You then need to study the relevant sections of your state's CDL manual, focusing on transporting cargo safely. After studying, you must pass a written tank vehicle test at your local Department of Licensing office. Once passed, the tank endorsement is added to your CDL.

While specific training or experience isn't legally required to obtain a CDL Tank endorsement in Washington, it's advisable to study the "Transporting Cargo Safely" section of the CDL manual thoroughly. Experience driving similar vehicles can also be beneficial. Ultimately, you must pass a written tank vehicle test at a Department of Licensing office.

Yes, an additional written knowledge test is required for the CDL Tank endorsement. The test focuses on the specific knowledge needed to safely operate tank vehicles. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and recognizing hazards. Studying the Commercial Driver Guide provided by the Washington State Department of Licensing will help prepare for this test.

The written test for the CDL Tank endorsement covers various topics related to safely transporting liquids and gases. Subjects include understanding bulk tank loading, unloading, and inspecting procedures, recognizing the dangers of surge, handling high center of gravity, and knowing how to control internal tank pressure among others. It's crucial to study these areas thoroughly.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll be tested on understanding of safe loading and unloading procedures, handling of surge, control of internal tank pressure, and awareness of high center gravity risks. Practical driving skills are typically assessed during the general CDL skills test rather than the tank endorsement test.

Drivers with a CDL Tank endorsement must adhere to specific regulations and safety guidelines when transporting liquids or gases. They must understand the unique risks associated with this type of cargo, such as surge and high center of gravity. However, they are not restricted from driving other types of commercial vehicles unless there are additional endorsements or restrictions on their license.

No, a valid CDL Tank endorsement is required to transport liquid or gas materials in the United States. This endorsement ensures the driver has the necessary knowledge and skills to handle such materials safely. Driving without the proper endorsement can result in legal penalties, including fines and suspension of driving privileges.

The CDL Tank endorsement can be added to your current CDL. You don't need a fresh application for a new license. However, you will need to pass a knowledge test related to tank vehicle operation. Once you pass the test, the endorsement will be added to your existing CDL.

Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also have a Hazardous Materials (HazMat) endorsement. They must pass a written test regarding the safe transportation of hazardous goods and undergo a federal background check. Understanding safety protocols, emergency procedures, and federal regulations is crucial for handling these materials.