Bus Driver Testing | Washington 2024 #2

Train for FREE online with our WA bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Washington in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When a school bus is approaching a bus stop, the driver should:

Not use the mirrors.

Approach with caution.

Drive quickly and stop abruptly.

School bus drivers should approach stops slowly and cautiously.

2 . Bus stops may be changed by:

The driver.

Parents.

The school district.

Official school bus routes and stops are established by the local school district. Drivers should never change a stop location without the written approval of an appropriate district official.

3 . A school bus's danger zones are located:

Only to the front of the bus.

Only to the rear and left side of the bus.

To the front, sides, and rear of the bus.

The danger zones of a school bus are areas in which children are most likely to be hit, either by another vehicle or by the bus itself. Such areas are located to the front, sides, and rear of a bus. Danger zones can extend 10 feet from every side of a bus.

4 . When taking the driving test and asked to make a turn, you should:

Not use a turn signal since you were told to make the turn.

Check traffic only to your right.

Check traffic in all directions.

When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.

5 . The inside rearview mirror is used to:

See passengers.

See potential hazards on the road.

See vehicles trying to switch lanes.

The overhead inside rearview mirror in a school bus is used to monitor passenger activity inside the bus.

6 . ABS allows a driver to:

Drive faster.

Maintain control of their vehicle while braking.

See farther ahead of their vehicle.

The purpose of an Anti-Lock Braking System (ABS) is to help prevent wheel lockup and help a driver maintain control of their vehicle when braking on a slippery surface.

7 . When completing a driver's side parallel parking maneuver, you should:

Pull forward directly into the parking space.

Back up past the parking space, then pull forward into it.

Pull forward past the parking space, then back into it.

You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Washington | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in Washington, you must first possess a valid CDL. Then, you should study the Doubles and Triples section of the Washington CDL Handbook. After studying, schedule and pass the written knowledge test at a Washington Department of Licensing office. Lastly, pay the required endorsement fee to add it to your license.

To obtain a CDL Doubles/Triples license, you must first have a basic CDL. You will then need to study for and pass the Doubles/Triples endorsement test, which covers specific knowledge related to driving these types of vehicles. This includes understanding the handling and safety procedures. Finally, you'll pay any required fees for the additional endorsement on your license.

While formal experience isn't required for a CDL Doubles/Triples endorsement, you must possess a valid Commercial Driver's License (CDL). It's recommended to study the CDL manual and take practice tests. Understanding coupling/uncoupling, inspecting doubles/triples, and checking air brakes is essential. Passing the Doubles/Triples endorsement knowledge test is the final step.

Yes, to obtain a CDL Doubles/Triples endorsement, you must pass the Doubles/Triples endorsement knowledge test. This test covers topics like coupling and uncoupling, inspecting doubles and triples, and checking air brakes. There is no additional driving skills test required beyond the standard CDL exam.

The CDL Doubles/Triples endorsement test primarily focuses on knowledge rather than specific driving maneuvers. You'll need to understand coupling and uncoupling, inspecting doubles and triples, and managing the high risk of rollover. Additionally, you'll need to know about pulling double/triple trailers, as well as the implications of crashes. The test is written, not practical, so no driving skills are showcased.

No, it is not permissible. In Washington, like in all states, a valid CDL Doubles/Triples endorsement is required to legally operate double or triple trailers. Driving these vehicles without the necessary endorsement can lead to serious penalties including fines and suspension of your commercial driving license.

You can append the Doubles/Triples endorsement to your existing CDL. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test. Once you pass, the endorsement is added to your CDL, allowing you to legally operate double and triple trailers.

Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. They can only operate double or triple trailers. Also, these drivers must comply with all federal and state regulations regarding commercial vehicle operation, including weight limits, logbook rules, and safety inspections. Any violation can lead to penalties or revocation of the endorsement.

In Washington State, double trailers can't exceed a combined length of 61 feet and triple trailers can't exceed 75 feet. As for weight, the maximum gross vehicle weight (including all axles) is 105,500 pounds. However, individual axle weights can't exceed limits set by federal bridge laws. Always check specific state and federal regulations.

Yes, there are specific safety guidelines and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement in Washington. These include maintaining proper spacing between trailers, using proper turning techniques, and adhering to weight restrictions. It is important to follow these guidelines to ensure the safe operation of double/triple trailers on the road.