Tennessee Driver's Examination

Passenger #2

FREE 2024 Tennessee CDL Practice Test for Passenger Endorsement Online

Train for FREE with our Tennessee CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TN DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . Cargo on flatbed trailers should be:

Tied down.

Glued down.

Left loose.

Pushed to one side.

On flatbed trailers or trailers without sides, cargo must be tied down to prevent it from shifting or falling off in transit.

2 . After a bus trip is completed, the vehicle:

Should be returned without an inspection.

Should be inspected.

Should be drained of fuel.

Buses should be inspected at the end of every trip. Key safety items could have been damaged by passengers, so an inspection allows these damages to be repaired before another trip is made.

3 . When performing the stop/start maneuver as a part of the skills test, you should:

Cut off other vehicles if needed to get onto the shoulder.

Not use any turn signals.

Slam on the brakes to stop as quickly as possible.

Decelerate smoothly.

During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.

4 . Carry-on baggage:

May be left in the aisle.

Must be secured away from exits.

Should be placed near the doors.

Bus passengers should not be allowed to leave baggage in any doorway or aisle. Baggage and freight must be secured in a manner that will prevent damage, allow the driver to move freely and easily, allow riders to exit by any window or door in an emergency, and protect riders from injury if the items fall or shift.

5 . Before starting a trip, you need to check the ____ to ensure that it is in proper working condition.

Paint

Speedometer

Air conditioning

Parking brake

Before starting on a bus trip, you should verify that key vehicle systems are in proper working order. Your inspection should include a check of the parking brake, lights, and reflectors.

6 . What is Gross Vehicle Weight Rating (GVWR)?

The loaded weight of a single vehicle as stated by the manufacturer

The total weight of the vehicle without a laod

The total weight of the cargo minus the containers used to transport the load

The maximum weight allowed to be transported by a vehicle

Gross Vehicle Weight Rating (GVWR) is the value specified by the manufacturer as the loaded weight of a single vehicle.

7 . When crossing railroad tracks, you should:

Not stop.

Try to pass slower vehicles.

Change lanes.

Put the vehicle in neutral.

When crossing railroad tracks during the on-road driving skills test, you must not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in the railroad crossing.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Tennessee | Frequently Asked Questions

A CDL Class A license in Tennessee allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the Gross Vehicle Weight Rating (GVWR) of the vehicle(s) being towed exceeds 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations, and flatbeds.

A Class A CDL license in Tennessee allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, flatbeds, tanker vehicles, and livestock carriers. It is typically used for long-haul or over-the-road (OTR) trucking. The license covers any vehicle with a GCWR of 26,001 pounds or more if the towed vehicle is over 10,000 pounds.

To obtain a Class A CDL license in Tennessee, you must be at least 21 years old (18-20 years for intrastate driving), possess a valid Tennessee driver's license, pass a vision test, and successfully complete both a knowledge test and a skills test. You'll also need to provide proof of citizenship or lawful permanent residency.

In Tennessee, you must be at least 21 years old to qualify for a Class A Commercial Driver's License (CDL) for interstate driving. However, you can obtain a Class A CDL for intrastate driving (within Tennessee) if you are at least 18 years old.

Specific endorsements are not required for a Class A CDL license, but they can expand your job opportunities. Endorsements allow you to operate specific types of vehicles, such as tank vehicles (N), passenger vehicles (P), school buses (S), or vehicles carrying hazardous materials (H). Each endorsement requires passing additional knowledge and/or skills tests.

The Class A CDL skills test in Tennessee encompasses three parts: a pre-trip inspection to confirm that your vehicle is safe to drive, a basic vehicle control test to demonstrate your ability to maneuver and control the vehicle, and an on-road driving test where you'll be evaluated on your interaction with traffic and adherence to safety rules.

Yes, there can be limitations on Class A CDL license holders. These are typically represented as restrictions noted on the license. For example, if you take your skills test in a vehicle without air brakes, you'll have an "L" restriction and can't operate vehicles with air brakes. Other restrictions can relate to medical conditions or the specific type of vehicle used for testing.

In Tennessee, the Class A CDL written test is primarily administered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL holders must be able to read and speak English well enough to communicate with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.

Yes, you can request accommodations for the Class A CDL written test if you have a disability. The Tennessee Department of Safety & Homeland Security is committed to ensuring accessibility for all test takers. You should contact them directly ahead of your scheduled test to discuss your specific needs and arrange appropriate accommodations.

If you don't pass the Class A CDL written test, you can retake it. However, you must wait at least one day before retesting. There's no limit on how many times you can retake the test, but each attempt requires a fee. It's advisable to study thoroughly before retesting to increase your chances of passing.