Connecticut Driver's Examination

Passenger #2

FREE 2024 Connecticut CDL Practice Test for Passenger Endorsement Online

Train for FREE with our Connecticut CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a CT DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . Distracted driving:

Is caused only by physical distractions.

Will be increased by pre-programming radio stations.

Can be prevented by avoiding conversation with others.

Distractions while driving can be physical (such as reaching for an object), mental (such as making conversation with a passenger), or both (such as holding a phone to send texts). Strategies to help you avoid distracted driving include pre-programming radio stations; planning out your route in advance; avoiding complex or emotionally taxing conversation while driving; adjusting your mirrors before setting out; and not eating, drinking, or smoking while behind the wheel.

2 . If a vehicle is equipped with an Anti-Lock Braking System (ABS), when the vehicle is started:

The brakes should lock up.

The ABS indicator light should turn on, then quickly shut off.

The steering wheel will not move until the air tanks are full.

After starting the engine of a vehicle equipped with an Anti-Lock Braking System (ABS), the indicator light should come on and then turn off. If the light stays on, something is wrong with the ABS.

3 . If a vehicle is equipped with power steering, you should inspect:

The hoses.

The pumps.

Both of the above.

When inspecting a vehicle with power steering, check the hoses, pumps, and fluid level. In particular, you should look for leaks in the hoses.

4 . If a vehicle has a vehicle inspection report, the driver:

Should not look at the report and instead try to find any issues themselves.

Should take the vehicle to a mechanic.

Should review the report.

Should not conduct a pre-trip inspection and rely only on the report.

For the first step of a vehicle inspection, you should review the last inspection report on your vehicle, if there is one. The carrier should have repaired any problems noted on the report.

5 . When changing lanes, you should:

Move quickly, before other vehicles can enter into the lane.

Move slowly in case another vehicle is in the lane.

Not use a turn signal.

Avoid the right lane.

Always change lanes slowly and smoothly. If there is a vehicle in the other lane that you did not see before beginning to move, they will have more time to react to your vehicle.

6 . If an approaching driver is using their high beam headlights, you should:

Look directly at the headlights.

Flash your high beam lights to remind the driver to switch to their low beams.

Look to the right side of your lane until the vehicle has passed.

Pull to the side of the road until the vehicle has passed.

If a vehicle is coming toward you while using its high beam headlights, glance away from the headlights and toward the right side of the road until the vehicle has passed. This will keep you from being blinded by the lights.

7 . During the basic vehicle control skills test:

A pull-up always counts against the applicant.

A pull-up should be completed at least once.

Stopping without changing direction is not considered a pull-up.

Excessive pull-ups are acceptable in the opinions of some test administrators.

During the basic vehicle control skills test, a pull-up will be scored any time an applicant stops and pulls forward to gain a better position. Stopping without changing direction will not. An excessive number of pull-ups will count as errors.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Connecticut | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Connecticut, you must first have a Commercial Driver's License (CDL). Then, pass the Hazardous Materials Endorsement Knowledge Test. You also need to complete a federal security threat assessment (TSA background check), including fingerprinting. Visit your local DMV to start the process and get additional information.

To obtain a CDL Hazmat license, you must have a valid Commercial Driver's License (CDL). You are required to pass the Hazardous Materials Endorsement Knowledge Test. A federal security threat assessment, including fingerprinting and a background check by the Transportation Security Administration (TSA), must also be completed. You should have a clean driving record as well.

When applying for a CDL Hazmat endorsement, you'll need to provide proof of U.S. citizenship or lawful permanent residency, such as a valid U.S. passport or birth certificate. You'll also need your current Commercial Driver's License (CDL), social security card, and proof of Connecticut residency. A completed application form (H-170) is also required, available from the Connecticut DMV.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test covers the necessary knowledge about the transportation of hazardous materials. It includes questions about loading and unloading hazardous materials, bulk packaging, and emergency response procedures. Passing this test is a prerequisite for obtaining the Hazmat endorsement on your CDL.

The CDL Hazmat endorsement written test in Connecticut covers a variety of subjects including identifying different types of hazardous materials, understanding shipping papers, placarding rules, containment rules, emergency response procedures, and safety protocols. It also tests knowledge on loading and unloading hazardous materials and the risks associated with each type of material.

Yes, there are extra charges associated with acquiring a CDL Hazmat endorsement. These include the application fee, fingerprinting fee, and the federal security threat assessment fee. The total cost can be over $100. However, the exact amount can vary and it's best to check with the Connecticut Department of Motor Vehicles for the most current fees.

Yes, a background check and security clearance are mandatory for the CDL Hazmat endorsement. The Transportation Security Administration (TSA) conducts a security threat assessment that includes fingerprinting and a review of criminal, immigration, and terrorism records. This is to ensure the safety and security of hazardous material transportation.

Yes, specialized training is required for the CDL Hazmat endorsement in Connecticut. Applicants must pass a written test that covers hazardous materials regulations and safety procedures. In addition to passing the test, they must also undergo a federal background check and fingerprinting. These requirements ensure that drivers are adequately prepared to handle hazardous materials safely.

No, you cannot transport hazardous materials without a valid CDL Hazmat endorsement in Connecticut. It is a federal requirement and it's illegal to do so without the proper endorsement. Violations can result in substantial fines, imprisonment, and disqualification from holding a commercial driver's license.

Yes, you can add the CDL Hazmat endorsement to your current CDL license. You'll need to pass the Hazmat knowledge test, undergo a TSA background check, and pay the necessary fees. It's not a new license, but an addition to your existing CDL.