Bus #1
Bus Driver Testing | Texas 2025 #1
Train for FREE online with our TX bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Texas in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
22
1 . A properly adjusted flat mirror should allow the driver to see:
The front bumper.
Properly adjusted flat mirrors on a school bus should allow the driver to see 200 feet behind the bus, the base of each rear wheel, and the sides of the bus.
2 . Which of the following is not acceptable emergency equipment?
Four yellow squares
During the vehicle inspection test, you will need to show emergency equipment, including spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and a properly charged and rated fire extinguisher.
3 . After traveling under an overpass during the driving skills test, you may be asked to recall:
If there was a shoulder near the roadway.
If you drive under an overpass during the on-road driving skills test, your examiner may ask you to recall the posted clearance or height of the overpass.
4 . When conducting a vehicle inspection, you must show each of the following, except:
That the oil pressure gauge comes on when brakes are used.
When checking the oil pressure gauge as part of a vehicle inspection test, you must ensure that it is working. The gauge should show increasing or normal oil pressure, or the oil pressure warning light should turn off. If equipped with one, the oil temperature gauge should begin a gradual rise to the normal operating range.
5 . When should a bus start moving after students have boarded?
As soon as the students cross the standee line
Once students have boarded a school bus, the driver should wait to move the bus until all of the passengers are seated and looking forward.
6 . Which of the following is not a backing maneuver that you will be asked to perform during the basic control skills test?
Blind offset
Backing maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right, offset back/left, driver side parallel parking, conventional parallel parking, and alley docking.
7 . During a vehicle inspection, ensure that lug nuts are all of the following, except:
Free of rust.
During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.
Search the best driving school in your neighbourhood
2025 Texas | Frequently Asked Questions
To acquire a CDL Tank endorsement in Texas, you must already have a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle (N) endorsement knowledge test at your local Department of Public Safety (DPS) office. You should study the Texas CDL Handbook to prepare for this test.
Obtaining a CDL Tank license requires you to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle (N) endorsement knowledge test. It's essential to study the related sections in the CDL Handbook before taking the test. You may also need to undergo a background check depending on the type of materials you will be transporting.
While Texas doesn't require specific training or experience for a CDL Tank endorsement, it's highly recommended to prepare for the Tank Vehicle (N) endorsement knowledge test. You can self-study using the Texas CDL Handbook. However, many choose to attend a training program to gain practical skills and knowledge, which could increase chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Texas, you must pass the Tank Vehicle (N) endorsement knowledge test. This written test focuses on the handling and transportation of liquid cargo. The specific content and number of questions can vary, so it's best to prepare using resources like the Texas CDL Handbook.
The written test for the CDL Tank endorsement in Texas includes subjects such as inspecting and driving tank vehicles, safe driving practices, cargo handling and emergency procedures, and specific knowledge related to transporting liquids and gases.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll need to understand the inspection of tank vehicles, specifics of driving high center of gravity vehicles, safe driving practices, and how to handle emergencies. There's no specific skills test or road test for the Tank endorsement like there is for the basic CDL.
Drivers with a CDL Tank endorsement must adhere to all federal and state regulations related to transporting liquids. This includes weight limits, proper securing of cargo, and handling of hazardous materials if applicable. Furthermore, they may be subject to more frequent inspections. Violations can result in fines, CDL suspension or revocation.
No, it's illegal to transport liquid or gas materials in a tank vehicle without a valid CDL Tank endorsement. This rule applies to vehicles designed to transport 1,000 gallons or more. Violation can result in hefty fines, legal penalties, and potential suspension or revocation of your CDL. Always ensure your endorsements are up-to-date before transporting such materials.
The CDL Tank endorsement can be added to your current Commercial Driver's License (CDL). You don't need to apply for a new CDL. However, you will need to pass the Tank Vehicle endorsement knowledge test. Once you pass the test, your CDL will be updated with the Tank endorsement.
Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Texas. These include obtaining a hazardous materials endorsement, passing a background check, completing specialized training, and adhering to strict safety protocols when transporting, loading, and unloading hazardous materials.
