Passenger #2
Passenger Endorsement | Wisconsin 2024 #2 Page 2 of 3
Train for FREE with our Wisconsin CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WI DMV passenger endorsement in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
8 . Which of the following is not a tire problem to check for and avoid?
All tires are made by the same company
During an inspection, there are a number of tire problems to check for and avoid. Look for air pressure that is too low or too high; excessive wear; cuts or other damage; tread separation; dual tires that come into contact with each other or other parts of the vehicle; mismatched tire sizes; radial and bias-ply tires used together; cut or cracked valve stems; and regrooved, recapped, or retreaded tires on the front wheels of a school bus.
9 . When checking power steering hoses during a pre-trip inspection, you should look for:
When doing a pre-trip inspection on a vehicle with power steering, be sure to check the hoses, pumps, and fluid level. In particular, you should check the hoses for leaks.
10 . If unsure of what is behind you when backing, you should remember G.O.A.L. What does G.O.A.L. stand for?
If you are unsure of what is behind you when backing up your vehicle, remember G.O.A.L. Get out of your vehicle and look at the area.
11 . Drowsy driving is most common during:
Drowsy driving is most common during the night because people are naturally prone to be less alert in the hours during which they are normally asleep. If you must drive at night, take every precaution to prevent fatigued driving.
12 . You should check and adjust your mirrors:
Be sure to check your mirrors before beginning a drive. Your posture may change day to day and your mirrors may need to be adjusted.
13 . If you are driving at a reduced speed in a construction zone when you spot a construction worker near the road, you should:
Always decrease your speed when traveling through a construction area. Slow down even further if there are workers on or near the roadway.
14 . Which of the following is acceptable if found during a pre-trip inspection?
Cracks in the tires
When inspecting your tires, verify that there is tread depth of at least 4/32 of an inch in every major groove on the front tires and tread depth of at least 2/32 of an inch in grooves on the other tires. Be sure that your tires are not too worn, are not cracked, have proper air pressure, and are all equally sized.
See the exact questions that will be on the 2024 Wisconsin DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Wisconsin | Frequently Asked Questions
To acquire a CDL Hazmat endorsement in Wisconsin, you must hold a valid Commercial Driver's License (CDL). You'll also need to pass the Hazardous Materials Endorsement Knowledge Test, provide proof of U.S. citizenship or legal status, and pass a Transportation Security Administration (TSA) background check. Finally, you must pay all required fees.
To obtain a CDL Hazmat license in Wisconsin, you must first possess a valid CDL. You must also pass a written Hazardous Materials Endorsement Knowledge Test and a TSA background check. Additionally, you must be at least 21 years old and have no disqualifying criminal offenses. Renewal requires passing the knowledge test again every five years.
When applying for a CDL Hazmat endorsement in Wisconsin, you'll need to provide proof of U.S. citizenship or lawful permanent residency, such as a passport or birth certificate. You'll also need your current CDL, social security card, and completed application form. Finally, you must provide fingerprints for the TSA background check.
Yes, there is a dedicated written test for the CDL Hazmat endorsement. The Hazardous Materials Endorsement Knowledge Test focuses on topics such as loading and unloading hazardous materials, bulk packaging marking, driving and parking rules, and emergency response procedures. The test must be passed with a score of at least 80%.
The written test for the CDL Hazmat endorsement in Wisconsin covers topics such as loading and unloading hazardous materials, bulk tank loading, inspection, driving and parking rules, communications, emergencies, and the definitions of hazardous materials. It also tests knowledge of the Hazardous Materials Regulations of the federal Department of Transportation.
Yes, there are additional charges for getting a CDL Hazmat endorsement in Wisconsin. These include a knowledge test fee of $30, a fingerprinting fee of $86.50 for the TSA background check, and an endorsement fee of $10. There may also be additional service fees depending on the method of payment used.
Yes, a background check and security clearance are mandatory for a CDL Hazmat endorsement. The Transportation Security Administration (TSA) performs these checks. Applicants must not have any disqualifying criminal offenses, and must be a U.S. citizen or have appropriate immigration status. The process includes fingerprinting and a review of personal history.
Yes, specialized training or certification is required for a CDL Hazmat endorsement. Applicants must pass a written Hazardous Materials knowledge test. Additionally, they must undergo a Transportation Security Administration (TSA) background check. Also, they must comply with the Federal Motor Carrier Safety Administration's training requirements for hazardous materials.
No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Wisconsin. This endorsement is required by the Federal Motor Carrier Safety Administration (FMCSA) for any commercial driver who transports hazardous materials that require placarding. Violations can lead to fines, disqualification, or even criminal penalties.
Yes, you can add the CDL Hazmat endorsement to your current CDL license. However, you'll need to pass the Hazmat knowledge test and undergo a TSA background check. You don't need to apply for a new CDL, but there is an additional process for obtaining the Hazmat endorsement. Visit your local DMV or its website for specific procedures.
