Double #1
Double Triple Test | Montana 2025 #1 Page 2 of 3
Train for FREE with our Montana CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL double triple license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.
20
16
20
8 . The parking brake in a newer vehicle is applied by:
In newer vehicles with air brakes, the parking brake is controlled by a yellow, diamond-shaped knob. The driver should pull the knob outward to apply the parking brakes and push the knob inward to release them.
9 . When making a visual check of a coupling, you should:
Loosen the air hoses.
When performing a visual check of coupling devices, you should make sure there is no space between the upper and lower fifth wheel. Ensure that the locking jaws are securely closed around the kingpin.
10 . When nearing a construction worker who is close to the road, you should:
Wait until the construction is complete before proceeding.
When driving through work zones, you should make a particular point of reducing your speed when workers are on or near the road.
11 . Rollovers happen when:
ABS is working effectively.
Rollovers happen when a vehicle is driven too fast. To reduce the risk of rollover, make sure the weight of cargo is loaded low to the ground, and that you take turns and curves slowly.
12 . Mirrors should be adjusted:
By an assistant.
Mirrors should be checked prior to the beginning of a trip. On a vehicle with a trailer, mirror adjustment can only be checked accurately if the connected trailer is straight.
13 . The service brake system:
Applies and releases the axle brake.
Air brakes consists of three separate braking systems: the service brake system, the parking brake system, and the emergency brake system. The service brake system applies and releases the brakes when you use the brake pedal while driving normally.
14 . If a truck is equipped, a trailer brake hand valve can be used to:
Load cargo.
If a tractor-trailer is so equipped, the trailer brake hand valve can be used to stop the vehicle from rolling back when being started from a stop.
2025 Montana | Frequently Asked Questions
A CDL Class B license in Montana allows the holder to operate commercial vehicles weighing more than 26,000 pounds and towing vehicles not exceeding 10,000 pounds. This includes buses, dump trucks, delivery trucks, and utility vehicles. The driver must pass a general knowledge test and a skills test in the type of vehicle they will be driving.
A Class B CDL license in Montana allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. This includes large passenger buses, segmented buses, delivery trucks, dump trucks with small trailers, and trucks that carry hazardous materials.
To acquire a Class B CDL license in Montana, you must be at least 18 years old (21 if you want to drive across state lines), possess a valid Montana driver’s license, and pass a vision test. You'll also need to pass a written knowledge test, obtain a commercial learner's permit (CLP), and pass a skills test in the type of vehicle you'll be driving.
To qualify for a Class B CDL license in Montana, you must be at least 18 years old. However, if you intend to drive a commercial vehicle across state lines or carry hazardous materials, you must be at least 21 years old. You must also meet all other licensing requirements.
Specific endorsements aren't necessary for a Class B CDL license in Montana, but they can expand your job opportunities. Endorsements certify you to drive certain types of vehicles or carry specific cargo, like hazardous materials. To get an endorsement, you'll need to pass additional written and skills tests related to the specific type of commercial driving.
The Class B CDL skills assessment in Montana includes three parts: a pre-trip vehicle inspection to test your ability to assess the condition of your vehicle, a basic controls test to evaluate your driving skills in a controlled environment, and an on-road driving test where you show your ability to safely operate the vehicle in various traffic situations.
Yes, Class B CDL license holders in Montana are restricted to driving single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or towing vehicles not exceeding 10,000 pounds GVWR. They cannot operate Class A vehicles unless they upgrade their license. Additionally, certain endorsements may be required to transport specific types of cargo.
In Montana, the written Class B CDL test is typically offered in English. However, some locations may offer the test in Spanish. It's advised to contact your local Montana Motor Vehicle Division directly to confirm language availability and any potential accommodations for non-English speakers.
Yes, you can request accommodations for the Class B CDL written exam if you have a disability. Montana's Motor Vehicle Division is committed to ensuring accessibility for all test-takers. You should contact your local MVD office in advance to discuss your needs and arrange appropriate accommodations. Accommodations may include extra time, a quiet room, or a reader.
Yes, if you don't pass the Class B CDL written test in Montana, you can retake it. However, you must wait at least three days before retaking the exam. There's no limit to the number of times you can retake the test, but a retesting fee may apply each time.