Bus #2
Bus Driver Testing | Montana 2026 #2 Page 3 of 3
Train for FREE online with our MT bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Montana in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
15 . If a driver cannot account for a student after the student has exited the bus, the driver should:
Ask another student if they've seen the student.
During unloading, if a school bus driver cannot account for a student outside of the bus, they should secure the bus and check for the missing student around and underneath the bus.
16 . If taking the driving test and the route does not include a railroad crossing, you:
If your on-road driving test route does not include a railroad crossing, you may be asked to explain and demonstrate the proper railroad crossing procedures to the examiner at a simulated location.
17 . Students loading and unloading a bus:
More students are killed each year during loading or unloading of school buses than while riding on school buses. Therefore, it is critical that school bus drivers follow appropriate safety procedures during loading and unloading. This process should never take place without being properly supervised.
18 . During a basic vehicle control skills test, a look is when:
A driver uses a look when they open their door, leave their seated position, and walk to the back of the vehicle to check its position. During the straight line backing exercise, a driver may not exceed one look. During any other exercise, a driver may not exceed two looks.
19 . When completing a driver's side parallel parking maneuver, you should:
You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.
20 . Properly adjusted outside convex mirrors should allow the driver to see:
The top of the bus.
On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus, the entire side of the bus up to the mirror mounts, and where the front of each rear tire touches the ground.
2026 Montana | Frequently Asked Questions
A CDL Class A license in Montana is defined as a commercial driver's license permitting the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the GVWR of the vehicle(s) being towed is over 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Montana allows you to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, and livestock carriers. It covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle(s) is over 10,000 pounds.
To obtain a Class A CDL license in Montana, you must be at least 18 years old (21 for interstate driving), possess a valid Montana driver's license, pass a vision test, and successfully complete both a written knowledge test and a skills test which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving exam.
In Montana, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving (within Montana only). However, to drive interstate (across state lines) or carry hazardous materials, you must be at least 21 years old.
Endorsements are not required for a Class A CDL license, but they provide additional driving privileges. For instance, you may need a Hazardous Materials (H) endorsement to haul hazardous freight, a Tank (N) endorsement to drive tank vehicles, or a Passenger (P) endorsement to transport passengers. Each endorsement requires passing a specific knowledge test.
The Class A CDL skills test in Montana includes three sections: a pre-trip vehicle inspection to ensure the vehicle is safe to drive, a basic vehicle control test to verify your ability to control the vehicle, and an on-road driving exam to assess your ability to drive the vehicle in various road and traffic conditions.
Yes, there are limitations imposed on Class A CDL license holders. Some limitations or restrictions may include: not being permitted to operate a manual transmission if you passed your test in an automatic vehicle, not being allowed to drive a school bus without the proper endorsement, or being required to wear corrective lenses while driving if it's indicated on the license.
In Montana, the written Class A CDL test is primarily administered in English. This is in line with Federal regulations requiring all commercial drivers to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, in Montana, accommodations can be made for the Class A CDL written test if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. It's recommended to contact the Montana Motor Vehicle Division beforehand to ensure all necessary arrangements are made.
Yes, if you don't pass the Class A CDL written test in Montana, you can retake it. However, you must wait at least one day before attempting the test again. Keep in mind that each retest may involve additional fees. It's recommended to review and study the areas you struggled with before retaking the test.