Bus #2
Bus Driver Testing | Maryland 2025 #2 Page 2 of 3
Train for FREE online with our MD bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Maryland in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
8 . When stopping to pick up students, you should park at least 10 feet away from the students:
Because a student may show up late.
When picking up students at a bus stop, you should come to a complete stop with the front bumper of the bus at least 10 feet away from the students. This forces them to walk toward the bus, allowing you to keep an eye on their movements.
9 . During a basic vehicle control skills test, you may be asked to:
Pull forward into a parking space.
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
10 . Which of the following is not acceptable emergency equipment?
Four yellow squares
During the vehicle inspection test, you will need to show emergency equipment, including spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and a properly charged and rated fire extinguisher.
11 . If driving a school bus, your four-way flashers should:
Only be used near railroad tracks if a train is approaching.
When driving a school bus, you must activate your four-way flashers while approaching and crossing a railroad crossing. Deactivate the flashers once your entire vehicle has cleared the tracks.
12 . The drive shaft should:
Not be bent.
During the vehicle inspection test, you should check that the drive shaft is not bent or cracked.
13 . What do outside crossover mirrors allow a driver to see?
The left side of the bus
Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.
14 . When a school bus is approaching a bus stop, the driver should:
School bus drivers should approach stops slowly and cautiously.
2025 Maryland | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Maryland, you need to have a valid Commercial Driver's License (CDL). Then, you must pass the Doubles/Triples endorsement knowledge test administered by the Maryland Motor Vehicle Administration (MVA). Studying the CDL manual and taking practice tests can help prepare for this examination.
To obtain a CDL Doubles/Triples license, you must already hold a Commercial Driver's License (CDL). Then, you need to pass the Doubles/Triples endorsement knowledge test. You're required to understand safety procedures, coupling and uncoupling, inspecting doubles and triples, and pulling double/triple trailers. It's recommended to study the CDL manual and take practice tests for preparation.
While specialized experience or training is not a legal requirement for a CDL Doubles/Triples endorsement, it's highly beneficial. Knowledge of safety procedures, coupling and uncoupling, and inspecting doubles and triples is crucial. Studying the CDL manual and taking practice tests can provide this knowledge. Some applicants may choose to attend a training school for practical experience.
Yes, to obtain a CDL Doubles/Triples endorsement in Maryland, you must pass the Doubles/Triples endorsement knowledge test. This written test covers information specific to driving vehicles with double or triple trailers. Studying the CDL manual and taking practice tests is highly recommended to prepare for this exam.
The CDL Doubles/Triples endorsement test in Maryland is primarily a written knowledge test. It focuses on specific rules and safety aspects of handling multiple trailers, such as coupling and uncoupling, inspecting doubles and triples, and managing the vehicles during various driving conditions. It does not typically include a skills or driving test showcasing specific maneuvers.
No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Maryland. Operating such vehicles without the appropriate endorsement can result in fines, license suspension, and potentially criminal charges. This endorsement ensures that drivers have the necessary knowledge and skills to safely operate these larger vehicles.
In Maryland, you can append the Doubles/Triples endorsement to your current Commercial Driver's License (CDL). You do not need to initiate a new application for a CDL. However, you will need to pass the Doubles/Triples endorsement knowledge test and pay the required fees to add this endorsement to your existing CDL.
Yes, there are some limitations for drivers holding a CDL Doubles/Triples endorsement in Maryland. For instance, drivers are required to follow specific rules regarding the coupling and uncoupling of trailers, length and weight of the trailers, and speed limits. Moreover, any traffic violation or unsafe driving behavior can result in the suspension or revocation of the endorsement.
In Maryland, a CDL Doubles/Triples endorsement allows drivers to operate vehicles with a Gross Vehicle Weight Rating (GVWR) over 26,001 pounds. However, specific weight and length restrictions can vary based on federal and state regulations. Generally, the maximum length for each trailer is 28.5 feet, and the combined weight (including cargo) cannot exceed 80,000 pounds without a special permit.
Yes, there are specific safety guidelines for driving double/triple trailers with a CDL Doubles/Triples endorsement in Maryland. These include adhering to weight and length restrictions, proper coupling and uncoupling of trailers, maintaining a safe following distance, and understanding the high rollover risk. Additionally, drivers are required to regularly inspect their vehicles and secure all cargo according to regulations.