Bus #2
Bus Driver Testing | Maryland 2024 #2
Train for FREE online with our MD bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Maryland in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . When students are being picked up by a school bus:
School bus drivers may only pick up students at official stops designated by authorized school officials.
2 . How far in advance of a school bus stop should a bus's lights be activated?
If a school bus is equipped with alternating flashing amber warning lights, they should be activated at least 200 feet (approximately 5 to 10 seconds) before a stop, unless state law requires otherwise.
3 . When checking the air and electrical lines during a vehicle inspection, all of the following should be true, except:
The air lines are not dragging against tractor parts.
When examining the air and electrical lines as part of your vehicle inspection test, you must listen for leaks. Ensure that the air hoses and electrical lines are not cut, chafed, spliced, or worn. Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.
4 . When performing a pre-trip inspection and looking into the fifth wheel gap, you should:
When inspecting a trailer coupling, you should make sure the fifth wheel locking jaws are closed around the shank of the kingpin, not the head of the kingpin.
5 . Drivers should try to stop ____ away from students at a bus stop.
Less than 10 feet
A school bus should stop at least 10 feet away from students who are being picked up at a bus stop. This forces the students to walk toward the bus, allowing the driver to observe their movements and better monitor their locations.
6 . When stopping to pick up students, a bus driver should:
Place the vehicle in third gear.
When stopping to pick up students, a school bus should be put in park. If the transmission does not have a park shift point, the vehicle should instead be placed in neutral.
7 . When taking the on-road driving skills test, you will be evaluated on your gear usage. You should not:
Shift while taking a turn.
During the on-road driving skills test, you will be evaluated on your gear usage. Select a gear that does not rev or lug the engine; avoid grinding and clashing gears; and avoid shifting through turns or intersections.
See the exact questions that will be on the 2024 Maryland DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Maryland | Frequently Asked Questions
To acquire a CDL Tank endorsement in Maryland, you must first have a Commercial Driver's License (CDL). Next, study for the Tank endorsement test using Maryland's CDL manual. Once ready, schedule and pass the written test at your local Motor Vehicle Administration (MVA) office. Upon passing, the Tank endorsement will be added to your CDL.
To obtain a Commercial Driver's License (CDL) Tank endorsement in Maryland, you must have a valid CDL. You then need to pass the Tank Vehicle endorsement written test, which covers topics like inspecting tank vehicles, safe driving, and handling emergencies. The Maryland Motor Vehicle Administration (MVA) provides study materials for the test.
While Maryland does not specifically require training or experience to obtain a CDL Tank endorsement, passing the Tank Vehicle endorsement written test is mandatory. Gaining practical experience or undergoing training can be beneficial for understanding the nuances of operating a tank vehicle and could improve your chances of passing the test.
Yes, an additional written test is required to obtain a CDL Tank endorsement in Maryland. This test covers the specifics of operating a tank vehicle, including inspection, safe driving, and handling emergencies. It is separate from the general CDL written test and must be passed to receive the endorsement.
The written test for the CDL Tank endorsement in Maryland includes subjects such as the proper loading and unloading of cargo, the safe operation of tank vehicles, emergency procedures, and the recognition of potential hazards. Additionally, it covers topics like tank vehicle inspection, controlling liquid surge, and understanding the effects of liquid movement during acceleration, braking, and turning.
The CDL Tank endorsement written test assesses knowledge on specific aspects of operating a tank vehicle. These include understanding the tank's structure, inspecting the vehicle before and after trips, safe driving techniques, knowledge about high center of gravity, managing surge, handling emergencies, and awareness of different liquids and gases that may be transported.
Drivers with a CDL Tank endorsement are subject to federal and state regulations regarding hours of service, vehicle maintenance, and reporting. They must also adhere to specific safety procedures when loading, unloading, and transporting hazardous materials. Furthermore, they are required to maintain a clean driving record and may face restrictions based on health conditions.
No, liquid or gas materials cannot be transported without a valid CDL Tank endorsement. This endorsement is specifically required for commercial drivers who operate tank vehicles that transport liquid or gaseous materials. Driving such vehicles without the proper endorsement is illegal and can result in severe penalties, including fines and suspension of the driver's Commercial Driver's License (CDL).
The CDL Tank endorsement can be added to your current commercial driver's license. You don't need to apply for a fresh license. However, you will need to pass the Tank Vehicle endorsement written test and pay the required fee to add this endorsement to your CDL. Always check with your local DMV for specific requirements.
Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also obtain a HazMat endorsement. This involves passing a written test, submitting to a TSA background check, and paying an additional fee. Drivers must follow strict safety protocols when handling these materials and are subject to regular inspections.
