Knowledge Test Class B #1
Class B Driving Test | Wisconsin 2024 #1
Train for FREE online with our Wisconsin class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WI CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
1 . When stopping in an emergency situation, you should:
If you need to make an emergency stop, you can use either the controlled braking method or the stab braking method. It's important to brake in a way that keeps your vehicle in a straight line but will still allow you to turn if necessary.
2 . In general, the length limit for a single vehicle and load is:
60 feet.
Under Wisconsin law, the length of a single vehicle and its load is limited to 40 feet.
3 . When you press the brake pedal in a vehicle with S-cam brakes, air pressure pushes out the rod and moves the:
Alcohol evaporator.
When pressing the brake pedal in a vehicle with S-cam brakes, air will enter the brake chambers. The added air pressure will push out the rods and move slack adjusters, twisting the brake camshafts.
4 . If asked by a law enforcement officer to take a test to determine your blood alcohol concentration (BAC):
Most states have an Implied Consent Law, which means that by driving a vehicle on the state's roads, you have agreed to undergo a drug or alcohol test if a police officer asks you to do so. If you refuse to submit to a test, you will lose your operating privileges. Make sure you are aware of the laws for every state in which you drive.
5 . In general, the legal maximum width of a vehicle and load is:
12 feet
In general, Wisconsin law limits the width of a vehicle (including its load) to no more than 8 feet, 6 inches.
6 . In cold weather, an alcohol evaporator should be checked and filled:
Once a month.
An alcohol evaporator can help prevent ice from building up in an air brake system. In cold weather, the evaporator should be checked and refilled every day.
7 . A tread depth of ____ should be in every major groove of a tire that is not in the front of a commercial motor vehicle.
For safe operation, a commercial motor vehicle needs a tread depth of 4/32 of an inch in every major groove on the front tires, and a tread depth of 2/32 of an inch on other tires.
See the exact questions that will be on the 2024 Wisconsin DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Wisconsin | Frequently Asked Questions
In Wisconsin, obtaining a CDL Tank Endorsement requires passing a written test. To prepare, study the Tank Vehicles section of the Wisconsin Commercial Driver's Manual. After studying, schedule a test at your local DMV. If you pass, you'll need to pay a fee to add the endorsement to your CDL. Remember, you must already have a valid CDL to qualify.
To obtain a CDL Tank license, you must first possess a valid Commercial Driver's License (CDL). Then, study the Tank Vehicles section of your state's Commercial Driver's Manual. You'll need to pass the written tank vehicle endorsement test at your local DMV. Lastly, pay the required fee to add the endorsement to your CDL.
While specific training or experience isn't legally required for a CDL Tank endorsement, it's highly recommended. Knowledge about handling tank vehicles, understanding the surge effect, and knowing safety procedures is crucial. Studying the Tank Vehicles section of the Commercial Driver's Manual thoroughly helps. However, practical experience or training can significantly improve your understanding and driving skills.
Yes, to obtain a CDL Tank endorsement, you need to pass an additional written test. This test covers specific knowledge related to the safe operation of commercial tank vehicles. It includes topics like vehicle inspection, driving techniques, and dealing with emergencies. The content for this test can be found in the Tank Vehicles section of the Commercial Driver's Manual.
The written test for the CDL Tank endorsement includes topics such as: the inspection and operation of tank vehicles, understanding the "baffled" and "unbaffled" tanks, managing the surge effect, handling high center of gravity, safe driving techniques, and responding to emergencies or hazardous conditions related to tank vehicles. The goal is to ensure safe and knowledgeable operation of tank vehicles.
The CDL Tank endorsement assessment primarily evaluates your knowledge rather than specific driving maneuvers. It focuses on understanding the unique handling of tank vehicles, managing surge, comprehending the differences between baffled and unbaffled tanks, and dealing with hazardous materials. Practical skills are usually assessed during the general CDL road test, not in the tank endorsement test.
Drivers with a CDL Tank endorsement must comply with federal and state regulations. They cannot drive tank vehicles without a valid CDL and the Tank endorsement. Additionally, if the tank vehicle is carrying hazardous materials, they must also have a Hazmat endorsement. Exceeding weight limits, failing to secure loads properly, or not following safety regulations can lead to penalties or loss of the endorsement.
No, you cannot transport liquid or gas materials in a tank vehicle without a valid Commercial Driver's License (CDL) with a Tank endorsement. This is a federal requirement and applies in all states, including Wisconsin. Violating this rule can lead to serious penalties, including fines and suspension of your CDL.
The CDL Tank endorsement can be added to your current commercial driver's license. You don't need a fresh application for a new license. However, you will need to pass a knowledge test specific to tank vehicles, and in some cases, a skills test may also be required. Once you pass, the Tank endorsement will be added to your existing CDL.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional certifications. You must possess a Hazardous Materials (Hazmat) endorsement along with your CDL Tank endorsement. To get this, you'll need to pass a written test on federal and state regulations for transporting hazardous materials and undergo a federal background check.
