Passenger Endorsement | Wyoming 2025 #2

Train for FREE with our Wyoming CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WY DMV passenger endorsement in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . How does doubling your speed from 20 mph to 40 mph affect your vehicle's braking distance?

It stays about the same.

It increases slightly.

It doubles.

It quadruples.

Increasing your vehicle's speed will increase your vehicle's striking power and braking distance. Doubling your vehicle's speed from 20 to 40 mph will multiply its braking distance by four.

2 . On a bus, the driver:

Does not need to wear a seat belt.

Must always wear a seat belt.

Must wear a seat belt, but only during usual school hours.

Must wear a seat belt, but only if they have been licensed for less than a year.

The driver's seat of a bus should be equipped with a seat belt, which must always be used by the driver.

3 . If you’re unfamiliar with the area in which you must back up, you should:

Get out of your vehicle and walk around the area to become more familiar with it.

Not use both mirrors, as that can cause too much distraction.

Wait for someone else to back up in the area so you see how they do it.

Turn on your high beam headlights.

Backing is always dangerous because you cannot see everything behind your vehicle. Especially if you are unfamiliar with the area, you should get out of your vehicle and familiarize yourself with your path of travel before beginning to back up.

4 . A danger of a large truck swerving to avoid a hazard is:

The truck may miss the object.

The truck may flip over.

The truck may stay in the same lane.

Other vehicles may do the same thing.

Swerving out of the way of a hazard is sometimes safer than trying to stop before reaching the hazard. You can usually turn away from something more quickly than you can come to a complete stop. However, swerving while in a vehicle that is either top-heavy or pulling multiple trailers may result in a rollover.

5 . When approaching a railroad crossing, a driver should:

Rely only on automated signals.

Expect to hear a train.

Cross the tracks before an approaching train reaches the crossing.

Reduce their speed.

You should approach every railroad crossing with the expectation that a train is coming. Do not rely on signals or your hearing to reliably tell you if a train is present. Always slow down when approaching a crossing. Never try to race a train.

6 . Before a bus enters a curve, the driver should:

Increase their speed.

Stay at the same speed.

Reduce their speed.

Move onto the shoulder of the road.

Crashes on curves are usually a result of the operator driving too fast. A bus driver should always reduce their driving speed before entering a curve, turn, on-ramp, or off-ramp.

7 . When pulling back into traffic after making a stop, you should:

Assume other drivers will allow you to merge.

Wait for a gap in traffic that is large enough to allow you to accelerate and merge.

Allow a passenger to get out and direct traffic to allow you to merge.

Continually sound your horn until other drivers allow you to merge.

When driving a bus, be aware of how quickly it can accelerate and much space it takes up on the roadway. Always wait for a gap in traffic that is large enough to accommodate your vehicle before you leave a stop.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Wyoming | Frequently Asked Questions

A CDL Class B license in Wyoming qualifies the holder to operate vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or towing vehicles not exceeding 10,000 pounds GVWR. This includes straight trucks, large buses, segmented buses, and trucks towing smaller vehicles within the weight limit. You must pass a written and skills test to obtain it.

A Class B CDL license in Wyoming allows the holder to operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or tow vehicles not exceeding 10,000 pounds GVWR. This includes straight trucks, large passenger buses, segmented buses, dump trucks with small trailers, and any truck towing a smaller vehicle within the weight limit.

To acquire a Class B CDL license in Wyoming, you must be at least 18 years old (21 for interstate driving), possess a valid Wyoming driver's license, pass a vision test, and complete a medical examination. You also need to pass the Wyoming Commercial Driver License knowledge test and the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.

To qualify for a Class B CDL license in Wyoming, you must be at least 18 years old for intrastate transport (within Wyoming only). However, federal regulations require drivers to be at least 21 years old to drive commercial vehicles across state lines, carry hazardous materials, or transport interstate freight within the state.

Specific endorsements aren't necessary for a Class B CDL license but can be added based on the type of vehicle you plan to drive or cargo you plan to carry. These include endorsements for passenger vehicles (P), school buses (S), and tank vehicles (N). Each endorsement requires additional testing.

The Class B CDL skills assessment in Wyoming includes three parts: pre-trip vehicle inspection, basic vehicle control, and on-road driving test. You'll need to demonstrate knowledge of your vehicle's parts and their function, show you can control the vehicle (including backing up), and safely drive in various traffic situations.

Yes, Class B CDL license holders in Wyoming are limited to operating vehicles that fall under the Class B category, which includes single or combination vehicles not exceeding 26,000 pounds. They can't operate Class A vehicles unless they upgrade their license. Also, they can't drive vehicles requiring specific endorsements (like passenger or school bus) without passing additional tests.

The written Class B CDL test in Wyoming is offered only in English, as per Federal Motor Carrier Safety Administration (FMCSA) regulations. This is because English language proficiency is considered necessary for safety reasons, including understanding traffic signs, communicating with law enforcement, and reading shipping papers.

Yes, you can request test accommodations for the Class B CDL written exam in Wyoming if you have a disability. The Wyoming Department of Transportation provides reasonable accommodations in accordance with the Americans with Disabilities Act. You'll need to contact them directly to discuss your specific needs and make arrangements.

If you don't pass the Class B CDL written test in Wyoming on your first attempt, you can retake it. However, you must wait at least one day before retesting. If you fail three times, you'll be required to wait 30 days before taking the test again. Remember, each attempt may require a separate testing fee.