Bus Driver Testing | Ohio 2025 #2

Train for FREE online with our OH bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Ohio in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . If you must drive in reverse at a student pick-up point, you should:

Back up before the students board the bus.

Back up after the students board the bus.

Back up while students direct you.

Backing in a school bus is strongly discouraged and should be done only if there is no other safe way to move the vehicle. If you must drive in reverse at a student pick-up point, you should wait until all students have first loaded the bus.

2 . As a general rule, where should students be kept during an emergency?

On the bus

On the side of the road near the bus

In a field away from the bus

In most emergency or crisis situations, students on a school bus will be safer and more easily controlled if they are kept on the bus than if they are evacuated. However, if staying on a bus will expose the students to risk or injury, the bus driver should escort them to a safe location.

3 . If a gate controlling a railroad crossing does not go back up after a train passes, you should:

Drive around the gate.

Wait for another vehicle to cross the tracks first to see if it is safe.

Call your dispatcher.

If you are stopped at a railroad crossing and a gate fails to return to its open position after a train passes, call your dispatcher. Do not attempt to drive around the lowered gate.

4 . The overhead inside rearview mirror should be positioned to show:

The rear tires.

All of the students on the bus.

The floor of the bus.

The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

5 . If you come to railroad tracks while driving a school bus, you should generally:

Check the tracks, but continue driving without stopping.

Stop 15 to 50 feet before the nearest rail.

Stop 75 feet before the nearest rail.

In general, school bus drivers should stop before any railroad crossings to check the tracks for approaching trains. Drivers should stop no closer than 15 feet and no farther than 50 feet from the nearest rail in order to have the best view of the tracks. They should look and listen for approaching trains before proceeding through the crossing.

6 . If a student drops an item while approaching a school bus, the student should:

Stop and pick up the object.

Have another student pick up the object.

Ask the driver to pick up the object.

If a student tries to retrieve a dropped object, they may disappear from the driver's line of sight. This is potentially very dangerous. Rather than retrieve dropped items themselves, students should move to a point of safety outside of the bus's danger zones, get the driver's attention, and wait for the driver to retrieve what has been dropped.

7 . When students board a bus, they should:

Sit in the back row first.

Sit in the back row only after all other seats are filled.

Be seated as far from the driver as possible.

Students should not occupy the back row of a school bus unless the bus is full. The closer to the front of a bus that students are seated, the safer they will be in the event of a rear-end collision. Students with special needs should sit near the driver.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Ohio | Frequently Asked Questions

In Ohio, a Commercial Driver's License (CDL) Class B allows you to operate a single vehicle with a gross vehicle weight rating (GVWR) of 26,001 lbs or more, or tow a vehicle not exceeding 10,000 lbs. It also permits driving buses, farm labor vehicles, and any vehicle not defined in Class A or Class C.

A Class B CDL license in Ohio allows operation of single vehicles with a gross vehicle weight rating of 26,001 lbs or more, or those towing vehicles not exceeding 10,000 lbs. This includes buses, dump trucks, tow trucks, delivery trucks, garbage trucks, and straight trucks. It does not include Class A or Class C vehicles.

To acquire a Class B CDL license in Ohio, you must be at least 18 years old (21 for interstate driving), possess a valid Ohio driver's license, pass a vision test, and complete a written knowledge exam. Additionally, you must pass a skills test which includes a pre-trip inspection, basic controls test, and on-road driving test. Medical examinations may also be required.

In Ohio, you must be at least 18 years old to qualify for a Class B Commercial Driver's License (CDL) for intrastate driving (within Ohio only). However, if you plan to drive interstate (across state lines) or haul hazardous materials, you must be at least 21 years old.

Specific endorsements aren't necessary for a Class B CDL license in Ohio, but they can expand your driving capabilities. Endorsements are available for passenger transport (P), school buses (S), tank vehicles (N), and hazardous materials (H). Each endorsement requires passing additional knowledge and skills tests.

The Class B CDL skills assessment in Ohio includes three parts: a pre-trip vehicle inspection to test your ability to assess if the vehicle is safe to drive, a basic controls test to evaluate your ability to control the vehicle, and an on-road driving test to assess your skills in traffic situations, including left and right turns, intersections, railway crossings and more.

Yes, there are limitations for Class B CDL license holders in Ohio. They are allowed to operate single vehicles with a gross vehicle weight rating of 26,001 lbs or more, or any such vehicle towing another not exceeding 10,000 lbs. However, they cannot legally operate a Class A combination vehicle. For some vehicles like school buses or tank trucks, special endorsements are required.

In Ohio, the written Class B CDL test is primarily offered in English. However, some locations may offer the test in other languages. It's recommended to contact your local Ohio Bureau of Motor Vehicles (BMV) for specific information on language availability. Note that federal regulations require all CDL holders to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.

Yes, you can request accommodations for the Class B CDL written exam if you have a disability. The Ohio Bureau of Motor Vehicles (BMV) provides reasonable testing accommodations in compliance with the Americans with Disabilities Act (ADA). However, you need to make this request in advance and provide documentation of your disability. Contact your local BMV for specific procedures on requesting accommodations.

Yes, if you fail the Class B CDL written test in Ohio, you can retake it. However, you must wait at least 24 hours before retesting. There is no limit to the number of times you can retake the test, but a retesting fee applies each time. It's advisable to study thoroughly to increase your chances of passing on the next attempt.