Double Triple Test | Montana 2026 #1

Train for FREE with our Montana CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL double triple license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . Why are roads especially slippery right after it begins to rain?

The water mixes with oil and grease on the road.

Roads are naturally slippery.

Gravel often gets washed to the middle of the lane.

Tires are not usually designed to drive in rain.

In rainy weather, roads are often at their most slippery when the rain first begins to fall. Fresh rainwater mixes with oil and grease on the road to form a slick film. As the rain continues, this mixture will eventually wash away.

2 . Headlights:

Are not usually necessary when driving at night.

Provide better light than the sun.

Should be on the high beam setting whenever possible.

Should always be on the high beam setting.

To improve visibility, you should use high beam headlights at night where it is safe and legal to do so. However, the glare from high beam lights can blind other drivers. You should dim your lights to their low beam setting when driving within 500 feet of an approaching vehicle.

3 . ____ is a thin layer of ice that forms on road surfaces.

White ice

Black ice

Soft ice

Sharp ice

Black ice is a thin layer of ice that is clear enough for the road surface to be seen through it. A road covered in black ice may look like it is merely wet. You should be very careful when temperatures are below freezing and the road looks wet.

4 . You should always be able to stop within:

10 feet of your vehicle.

1,000 feet of your vehicle.

Your view of the road ahead.

A minute of hitting the brakes.

You should always make sure that your vehicle will be able to stop within the area of the road that you are able to see. This means that you must slow down whenever conditions reduce visibility.

5 . When doing an inspection, ensure that the brake pads are:

Covered with grease.

Covered with coolant.

Covered with oil.

Free of oil or grease.

When inspecting a vehicle's brakes, you should make sure the shoes and pads do not have oil, grease, or brake fluid on them.

6 . Which of the following is not an example of a distracted person that motorists should be worried about?

A driver talking to a passenger in their vehicle

A child on the side of the road

A construction worker on the side of the road

A person sitting on a bench waiting for a bus

Be cautious when driving near people who are not paying attention to the road. Be wary of road workers, drivers who are engaged in conversation with passengers, and children near the road.

7 . During an applied leakage test, what is the maximum leakage rate that is safe for a single vehicle with air brakes?

10 psi in one minute

5 psi in one minute

3 psi in one minute

It is important to know the maximum air loss rate that is safe for your specific vehicle. A single vehicle with air brakes should have a leakage rate no higher than 3 psi in a minute during an applied leakage test.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2026 Montana | Frequently Asked Questions

To acquire a CDL Tank endorsement in Montana, you must first have a Commercial Driver's License (CDL). After that, study for the tank endorsement test using the Montana CDL manual. Schedule and pass the written test at your local Montana Motor Vehicle Division. Upon passing, you'll receive your tank endorsement. Fees may apply.

To obtain a CDL Tank license, you must first hold a valid Commercial Driver's License (CDL). Then, prepare for the tank endorsement test using the appropriate study materials, such as the state's CDL manual. After studying, schedule and pass the written test at your local Motor Vehicle Division. A fee is typically required for this process.

Specific training or experience isn't mandatory for a CDL Tank endorsement in Montana. However, studying the CDL manual thoroughly is strongly recommended to pass the written test. Practical experience or training could also be beneficial for understanding the unique handling characteristics and safety considerations of driving a tank vehicle.

Yes, to obtain a CDL Tank endorsement in Montana, you'll need to pass an additional written test. This test covers specific knowledge related to the safe operation and handling of commercial tank vehicles. Studying the relevant sections of your state's CDL manual is crucial to pass this test.

The written test for the CDL Tank endorsement in Montana covers subjects like inspecting tank vehicles, safe driving for tank vehicles, safe loading and unloading procedures, and understanding the special characteristics of tanks. You'll also learn about handling emergencies, including different types of hazardous materials spills.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its impact, maintaining safe control on curves, turns, and railroad crossings, and managing emergency situations like hazardous spills. It's about ensuring you can safely operate a tank vehicle under various conditions.

Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate commercial tank vehicles and are restricted from transporting hazardous materials unless they also have a Hazmat endorsement. Additionally, they must comply with all federal and state regulations regarding transport of liquids and gases.

No, drivers cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required by federal regulations to ensure that drivers are properly trained and understand the safety precautions necessary when transporting these types of materials. Violating this requirement can result in severe penalties.

The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL). You don't need to apply for a new license. However, you will need to pass the Tank Vehicle endorsement written test. Once you pass, the endorsement is added to your existing CDL. Be sure to check with your local DMV for any specific state requirements.

Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Montana. These include passing the CDL written test for hazardous materials, undergoing a TSA background check, completing a hazardous materials endorsement application, and paying the required fees. Additionally, individuals must meet certain age and experience requirements and adhere to federal regulations for transporting hazardous materials.