Montana Driver's Examination

Bus #2

FREE Online Bus Driver Testing | Montana 2024

Train for FREE online with our MT bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Montana in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When encountering a railroad crossing during the driving test, you should:

Pass another vehicle on the tracks if the other vehicle is moving too slowly.

Change lanes while on the tracks.

Not change gears while on the tracks.

During the on-road driving test, you must not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in a railroad crossing.

2 . When taking the driving test and asked to make a turn, you should:

Not use a turn signal since you were told to make the turn.

Check traffic only to your right.

Check traffic in all directions.

When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.

3 . When taking the on-road driving test, you must do all of the following, except:

Wear your safety belt.

Obey all traffic signs.

Complete the test without an accident.

Demonstrate that you can use your cell phone while driving.

During the on-road driving test, you must drive in a safe and responsible manner; wear your safety belt; obey all traffic signs, signals, and laws; and complete the test without any accidents or moving violations.

4 . If you are stopped at a railroad crossing while operating a school bus, you should:

Prepare to proceed as soon as a train passes.

Ignore signs and signals.

Open the door to listen for approaching trains.

When stopped at a railroad crossing while operating a school bus, do not rely only on signals to tell you if a train is approaching. You should silence all passengers, open the front door, and look and listen for trains. After a train has passed, you should check for another train approaching from either direction before you proceed across the tracks.

5 . When students are being picked up by a school bus:

The students should wait at a designated bus stop.

The driver should stop to pick up students who are walking to a designated bus stop.

The parents may choose where the bus stops are located.

School bus drivers may only pick up students at official stops designated by authorized school officials.

6 . When approaching a school bus stop, the driver should:

Honk the horn.

Drive slowly.

Talk to students on the bus.

A school bus driver should always approach bus stops slowly and cautiously.

7 . Your vehicle's final position should be:

Exactly where the examiner has instructed it to be.

Within five feet of the final position described by the examiner.

Wherever you can safely park.

Within two feet of the final position described by the examiner.

You should finish each exercise with your vehicle in the exact position described by the examiner. You can be penalized for failing to complete an exercise exactly in the manner described by the examiner, potentially resulting in failure of the basic control skills test.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Montana | Frequently Asked Questions

To acquire a CDL Tank endorsement in Montana, you must first have a Commercial Driver's License (CDL). After that, study for the tank endorsement test using the Montana CDL manual. Schedule and pass the written test at your local Montana Motor Vehicle Division. Upon passing, you'll receive your tank endorsement. Fees may apply.

To obtain a CDL Tank license, you must first hold a valid Commercial Driver's License (CDL). Then, prepare for the tank endorsement test using the appropriate study materials, such as the state's CDL manual. After studying, schedule and pass the written test at your local Motor Vehicle Division. A fee is typically required for this process.

Specific training or experience isn't mandatory for a CDL Tank endorsement in Montana. However, studying the CDL manual thoroughly is strongly recommended to pass the written test. Practical experience or training could also be beneficial for understanding the unique handling characteristics and safety considerations of driving a tank vehicle.

Yes, to obtain a CDL Tank endorsement in Montana, you'll need to pass an additional written test. This test covers specific knowledge related to the safe operation and handling of commercial tank vehicles. Studying the relevant sections of your state's CDL manual is crucial to pass this test.

The written test for the CDL Tank endorsement in Montana covers subjects like inspecting tank vehicles, safe driving for tank vehicles, safe loading and unloading procedures, and understanding the special characteristics of tanks. You'll also learn about handling emergencies, including different types of hazardous materials spills.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its impact, maintaining safe control on curves, turns, and railroad crossings, and managing emergency situations like hazardous spills. It's about ensuring you can safely operate a tank vehicle under various conditions.

Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate commercial tank vehicles and are restricted from transporting hazardous materials unless they also have a Hazmat endorsement. Additionally, they must comply with all federal and state regulations regarding transport of liquids and gases.

No, drivers cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required by federal regulations to ensure that drivers are properly trained and understand the safety precautions necessary when transporting these types of materials. Violating this requirement can result in severe penalties.

The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL). You don't need to apply for a new license. However, you will need to pass the Tank Vehicle endorsement written test. Once you pass, the endorsement is added to your existing CDL. Be sure to check with your local DMV for any specific state requirements.

Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Montana. These include passing the CDL written test for hazardous materials, undergoing a TSA background check, completing a hazardous materials endorsement application, and paying the required fees. Additionally, individuals must meet certain age and experience requirements and adhere to federal regulations for transporting hazardous materials.