Maryland Driver's Examination

Bus #1

FREE Online Bus Driver Testing | Maryland 2024

Train for FREE online with our MD bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Maryland in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . What do outside crossover mirrors allow a driver to see?

The front bumper

The rear bumper

The right side of the bus

The left side of the bus

Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.

2 . When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?

Not driving over curbs or sidewalks

Stopping behind crosswalks

Driving in the leftmost lane if more than one driving lane is available

Finishing a right turn in the rightmost lane

During the on-road driving skills test, make sure you do not put your vehicle over curbs, sidewalks, or lane markings. Stop behind stop lines, crosswalks, or stop signs. On multiple-lane roads, complete turns in the proper lane. Always move to or remain in the rightmost lane, unless the lane is blocked.

3 . The overhead inside rearview mirror should be positioned to display:

The rear tires.

All of the students on the bus.

The floor of the bus.

The ceiling of the bus.

On a school bus, the overhead inside rearview mirror is used to monitor passenger activity inside the bus. The top portion of the mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

4 . The drive shaft should:

Be bent toward the passenger side.

Be bent toward the driver’s side.

Be bent to one side or the other.

Not be bent.

During the vehicle inspection test, you should check that the drive shaft is not bent or cracked.

5 . When stopping to pick up students, a bus driver should:

Place the vehicle in park.

Place the vehicle in first gear.

Place the vehicle in reverse.

Place the vehicle in third gear.

When stopping to pick up students, a school bus should be put in park. If the transmission does not have a park shift point, the vehicle should instead be placed in neutral.

6 . Drivers should try to stop ____ away from students at a bus stop.

About 100 feet

At least 50 feet

At least 10 feet

Less than 10 feet

A school bus should stop at least 10 feet away from students who are being picked up at a bus stop. This forces the students to walk toward the bus, allowing the driver to observe their movements and better monitor their locations.

7 . When taking the on-road driving skills test, you will be evaluated on your gear usage. You should not:

Avoid grinding or clashing gears.

Select a gear that does not rev the engine.

Forget to shift through an intersection.

Shift while taking a turn.

During the on-road driving skills test, you will be evaluated on your gear usage. Select a gear that does not rev or lug the engine; avoid grinding and clashing gears; and avoid shifting through turns or intersections.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Maryland | Frequently Asked Questions

To acquire a CDL Tank endorsement in Maryland, you must first have a Commercial Driver's License (CDL). Next, study for the Tank endorsement test using Maryland's CDL manual. Once ready, schedule and pass the written test at your local Motor Vehicle Administration (MVA) office. Upon passing, the Tank endorsement will be added to your CDL.

To obtain a Commercial Driver's License (CDL) Tank endorsement in Maryland, you must have a valid CDL. You then need to pass the Tank Vehicle endorsement written test, which covers topics like inspecting tank vehicles, safe driving, and handling emergencies. The Maryland Motor Vehicle Administration (MVA) provides study materials for the test.

While Maryland does not specifically require training or experience to obtain a CDL Tank endorsement, passing the Tank Vehicle endorsement written test is mandatory. Gaining practical experience or undergoing training can be beneficial for understanding the nuances of operating a tank vehicle and could improve your chances of passing the test.

Yes, an additional written test is required to obtain a CDL Tank endorsement in Maryland. This test covers the specifics of operating a tank vehicle, including inspection, safe driving, and handling emergencies. It is separate from the general CDL written test and must be passed to receive the endorsement.

The written test for the CDL Tank endorsement in Maryland includes subjects such as the proper loading and unloading of cargo, the safe operation of tank vehicles, emergency procedures, and the recognition of potential hazards. Additionally, it covers topics like tank vehicle inspection, controlling liquid surge, and understanding the effects of liquid movement during acceleration, braking, and turning.

The CDL Tank endorsement written test assesses knowledge on specific aspects of operating a tank vehicle. These include understanding the tank's structure, inspecting the vehicle before and after trips, safe driving techniques, knowledge about high center of gravity, managing surge, handling emergencies, and awareness of different liquids and gases that may be transported.

Drivers with a CDL Tank endorsement are subject to federal and state regulations regarding hours of service, vehicle maintenance, and reporting. They must also adhere to specific safety procedures when loading, unloading, and transporting hazardous materials. Furthermore, they are required to maintain a clean driving record and may face restrictions based on health conditions.

No, liquid or gas materials cannot be transported without a valid CDL Tank endorsement. This endorsement is specifically required for commercial drivers who operate tank vehicles that transport liquid or gaseous materials. Driving such vehicles without the proper endorsement is illegal and can result in severe penalties, including fines and suspension of the driver's Commercial Driver's License (CDL).

The CDL Tank endorsement can be added to your current commercial driver's license. You don't need to apply for a fresh license. However, you will need to pass the Tank Vehicle endorsement written test and pay the required fee to add this endorsement to your CDL. Always check with your local DMV for specific requirements.

Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also obtain a HazMat endorsement. This involves passing a written test, submitting to a TSA background check, and paying an additional fee. Drivers must follow strict safety protocols when handling these materials and are subject to regular inspections.