Alabama Driver's Examination

Bus #1

FREE Online Bus Driver Testing | Alabama 2024

Train for FREE online with our AL bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Alabama in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . During the basic control skills test, you will receive points if you:

Pull up once.

Check your positioning.

Cross over exercise boundaries.

The examiner will score the number of times your vehicle touches or crosses an exercise boundary line. Each encroachment will count as an error, resulting in points against your skills test score.

2 . ABS helps you:

Lock up your wheels.

Keep your wheels from locking up.

Count the number of students boarding the bus.

The function of an Anti-Lock Braking System (ABS) is to prevent a vehicle's wheels from locking up when the driver brakes hard on a slippery surface.

3 . The area to the left of a school bus is considered especially dangerous to students because:

The sun’s reflection obscures the left side of the bus.

Passing vehicles are located to the left of the bus.

It is difficult to see the left side of any bus.

There is no door on the left side of the bus.

While all sides of a school bus have danger zones, the left side is particularly hazardous to students due to the presence of passing vehicles.

4 . During the driving test, when asked to make a lane change:

You should not be concerned with other motorists.

You should use your turn signal and change lanes when safe.

You should make the lane change as quickly as possible, even if that means cutting off another driver.

When asked to make a lane change during the on-road driving test, you should make the proper traffic checks, use your turn signal, and smoothly change lanes when it is safe to do so.

5 . When asked to make a turn while taking your driving test, you should:

Use your turn signal, but only if other cars are present.

Check traffic only in the direction of the turn.

Check traffic in all directions.

When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.

6 . A blind spot extends at least ____ behind a school bus.

10 feet

50 feet

100 feet

1,000 feet

A school bus has blind spots immediately below the side flat mirrors, immediately in front of the side flat mirrors, and directly behind the rear bumper. Rear blind spots typically extend 50 to 150 feet behind a bus but can sometimes extend up to 400 feet, depending on the length of the vehicle.

7 . During a basic vehicle control skills test, you may be asked to:

Alley dock.

Parallel park to your right.

Parallel park to your left.

All of the above.

Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Alabama | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in Alabama, you must already possess a valid commercial driver's license (CDL). You'll then need to pass the Doubles and Triples Endorsement Knowledge Test. This test covers topics such as coupling and uncoupling, inspecting doubles and triples, and the proper procedures for towing double/triple trailers.

To obtain a CDL Doubles/Triples license, you must first have a valid commercial driver's license (CDL). Next, you'll need to pass the Doubles/Triples Endorsement Knowledge Test. This test covers areas such as coupling and uncoupling, inspecting doubles and triples, and correct towing procedures. Finally, pay the necessary fees to add the endorsement to your CDL.

While Alabama doesn't mandate specialized training for a CDL Doubles/Triples endorsement, it's recommended to study the Doubles/Triples section in the CDL manual thoroughly. This will prepare you for the written knowledge test at your local DMV. Practical experience driving such vehicles can also be beneficial, but it's not a legal requirement.

Yes, to obtain a CDL Doubles/Triples endorsement, you must pass the Doubles/Triples Endorsement Knowledge Test. This written test covers specific areas related to driving double and triple trailers, such as coupling and uncoupling, inspecting doubles and triples, and the correct procedures for towing these types of trailers.

The CDL Doubles/Triples endorsement test is a written knowledge test, not a skills test. It covers topics like coupling and uncoupling, inspecting doubles and triples, and correct towing procedures. However, practical skills like maneuvering such vehicles safely are important to learn during training, even though they are not directly tested during the endorsement exam.

No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Alabama. This endorsement is required by law to ensure that drivers have the necessary knowledge and skills to operate these types of vehicles safely. Operating without the proper endorsement can result in fines and penalties.

You can add the CDL Doubles/Triples endorsement to your existing Commercial Driver's License. You don't need to initiate a completely new application. However, you will need to pass the Doubles/Triples Endorsement Knowledge Test and pay any associated fees to obtain this endorsement. Always check with your local DMV for specific procedures and requirements.

Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. These drivers can only operate vehicles that are specifically designed for double or triple trailers. They can't exceed the weight limits set by federal and state laws, and they must comply with hours of service regulations to prevent fatigue-related accidents. Additionally, specific routes may be restricted for these vehicles.

In Alabama, the maximum legal weight for a double or triple trailer setup is 80,000 pounds, depending on the trailer's axle configuration. The maximum length for any one trailer is 53 feet, but the combined length of all trailers can't exceed 65 feet. Violating these restrictions may result in penalties or fines.

Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include conducting pre-trip inspections, understanding how to couple and uncouple correctly, and knowing how to handle the high rollover risk associated with these trailers. They must also ensure proper weight distribution in trailers and follow the rules for maintaining safe following distances. Compliance with all federal and state regulations is mandatory.