Bus #2
Bus Driver Testing | Alabama 2024 #2 Page 2 of 3
Train for FREE online with our AL bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Alabama in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
8 . When exiting your vehicle, you:
Must be facing the vehicle.
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
9 . The loading of a school bus:
Can be dangerous.
More students are killed each year during loading or unloading of school buses than while riding on school buses. Therefore, it is critical that school bus drivers follow appropriate safety procedures during loading and unloading.
10 . When asked to make a turn while taking your driving test, you should:
When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.
11 . During a basic vehicle control skills test, a look is when:
A driver uses a look when they open their door, leave their seated position, and walk to the back of the vehicle to check its position. During the straight line backing exercise, a driver may not exceed one look. During any other exercise, a driver may not exceed two looks.
12 . When students board a school bus, the driver should:
While students are boarding a school bus, the driver should supervise the loading while watching all mirrors for any students running to catch the bus.
13 . During the driving test, when asked to make a lane change:
When asked to make a lane change during the on-road driving test, you should make the proper traffic checks, use your turn signal, and smoothly change lanes when it is safe to do so.
14 . When taking the driving test and asked to make a turn, you should:
When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.
2024 Alabama | Frequently Asked Questions
A CDL Class B license in Alabama allows the driver to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or any such vehicle towing a vehicle not in excess of 10,000 pounds GVWR. This includes straight trucks, buses, large passenger vehicles, segmented buses, and trucks towing smaller vehicles.
In Alabama, a Class B CDL license permits the operation of single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or towing a vehicle not exceeding 10,000 pounds GVWR. This includes large buses, segmented buses, straight trucks, and trucks towing smaller vehicles such as a small trailer or boat.
To acquire a Class B CDL license in Alabama, applicants must be at least 21 years old (or 18 for intrastate travel), possess a valid Alabama driver's license, pass a vision test, and complete a written knowledge test. They must also complete a skills test in a vehicle representative of the class of CDL they are applying for.
In Alabama, you must be at least 21 years old to qualify for a Class B CDL license for interstate commerce. However, if you only intend to drive within the state (intrastate commerce), you can qualify for a Class B CDL license at 18 years old.
Specific endorsements aren't necessary for a Class B CDL license, but they can provide additional driving privileges. For instance, endorsements for passenger vehicles, school buses, tank vehicles, or hazardous materials can be added to a Class B CDL after passing specific written and skills tests. These endorsements broaden the range of vehicles you can operate.
The Class B CDL skills assessment in Alabama includes three parts: the vehicle inspection test, the basic controls test, and the road test. The vehicle inspection test assesses your ability to determine if your vehicle is safe to drive. The basic controls test evaluates your ability to maneuver and control the vehicle. Lastly, the road test assesses your on-road driving skills.
Yes, Class B CDL license holders in Alabama are limited to operating single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a vehicle towing another vehicle not exceeding 10,000 pounds GVWR. They cannot operate a combination of vehicles (like tractor-trailers) that would require a Class A CDL. Specific endorsements may also be required for certain types of vehicles or loads.
In Alabama, the written Class B CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that federal regulations require all commercial drivers to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, you can request test accommodations for the Class B CDL written exam in Alabama if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. The Alabama Law Enforcement Agency will review your request and determine if the accommodation can be provided without compromising the integrity of the test.
Yes, if you don't pass the Class B CDL written test in Alabama, you can retake it. However, you must wait at least one day before retaking the test. If you fail the test three times, you will need to start the application process over, including paying the necessary fees. It's recommended to study thoroughly to increase your chances of passing on your next attempt.