Bus #2
Bus Driver Testing | North Dakota 2026 #2 Page 3 of 3
Train for FREE online with our ND bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in North Dakota in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
15 . If a bus stalls on a railroad track, the driver should:
Keep everyone inside the bus and call a tow truck.
If a school bus becomes stalled or trapped on railroad tracks, the driver should immediately evacuate everyone from the bus. To best avoid flying debris from the bus being struck by a train, the students should be led far away from the bus at an angle that is in the direction of any oncoming train.
16 . If you must drive a school bus during periods of high winds, you should:
Drive normally.
You should slow down when driving a school bus in high winds. Keep a strong grip on the steering wheel and try to anticipate gusts.
17 . If the Anti-Lock Braking System (ABS) is malfunctioning:
You should stop driving and wait for the ABS to work again.
An Anti-Lock Braking System (ABS) is in place as an addition to a braking system. It intervenes to prevent brakes from locking up during hard braking. If ABS is not working, the basic braking functions on a vehicle will still remain, so the driver can continue to drive and brake normally.
18 . If you must back up at a student pick-up point, you should:
Tell the students to wait at the stop and then back toward the stop.
If you must back up a school bus at a student pick-up point, be sure to pick up all students before you begin backing up. When backing, it is especially important to keep an eye out for latecomers.
19 . A low air pressure warning signal should activate:
When tank pressure falls below 5 psi.
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
20 . What is the Gross Vehicle Weight Rating (GVWR)?
The maximum permitted weight of only a tractor
The Gross Vehicle Weight (GVW) is the total weight of a single vehicle plus its load. The Gross Vehicle Weight Rating (GVWR) is the maximum combined weight of a vehicle and its cargo that is permitted and specified by the manufacturer.
Search the best driving school in your neighbourhood
2026 North Dakota | Frequently Asked Questions
To acquire a CDL Tank endorsement in North Dakota, you must first have a Commercial Driver’s License (CDL). After that, study the tank vehicle section of the ND CDL manual, then take the written tank vehicle endorsement test at a North Dakota Department of Transportation office. Passing this test will give you the tank endorsement on your CDL.
To obtain a CDL Tank license, it's essential to have a Commercial Driver’s License (CDL) first. Then, you need to study and understand the tank vehicle section of the CDL manual. Finally, you must pass the written tank vehicle endorsement test at a Department of Transportation office in your state.
While specific training or experience isn't mandatory by law for a CDL Tank endorsement, it's highly recommended. Understanding how to handle large, often hazardous, liquids is crucial for safety. Studying the tank vehicle section of the CDL manual is a must. You'll also need to pass a written tank vehicle endorsement test at a Department of Transportation office.
Yes, to obtain a CDL Tank endorsement in North Dakota, you must pass a specific written knowledge test that covers the safe operation of a commercial tank vehicle. This test is in addition to the general CDL written exam. The endorsement test typically includes questions about inspecting tank vehicles, driving tank vehicles, and safe driving rules.
The written test for the CDL Tank endorsement covers a variety of topics specific to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe driving rules. It also covers aspects like the effects of liquid surge on handling, special considerations for loading and unloading, and understanding outage or ullage to prevent overfilling.
The CDL Tank endorsement assessment doesn't involve a specific skills or maneuvers test. However, the written test evaluates knowledge on handling liquid surge, driving tank vehicles safely, inspecting tank vehicles, and understanding how to load and unload. It's essential to be familiar with these aspects to pass the assessment.
Yes, drivers with a CDL Tank endorsement must adhere to specific rules and regulations. They must understand how to handle the high center of gravity in tank vehicles and the effects of liquid surge. They're also limited to driving only those commercial vehicles that a tank endorsement covers, and they must comply with all federal and state transportation regulations.
No, drivers cannot legally transport liquid or gas materials without a valid CDL Tank endorsement in North Dakota. This endorsement is specifically designed to ensure that drivers have the necessary knowledge and skills to transport these materials safely. Violating this requirement can result in severe penalties, including fines and suspension of the CDL.
Yes, you can add a CDL Tank endorsement to your existing commercial driver's license in North Dakota. You don't need to apply for a new license. However, you will need to pass the Tank Vehicle written test and pay the required fee. Always check with your local DMV for the most accurate information.
Yes, handling hazardous materials with a CDL Tank endorsement in North Dakota requires additional certification. Drivers must obtain a Hazardous Materials (HazMat) endorsement. This involves passing a written test and a TSA background check. These measures ensure the driver is knowledgeable and trustworthy to transport such materials safely.
