Double #1
Double Triple Test | Idaho 2024 #1 Page 2 of 3
Train for FREE with our Idaho CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID CDL double triple license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.
20
16
20
8 . A truck should be parked:
Because you can't see everything behind you, backing is always dangerous and should be avoided whenever possible. Choose parking spaces from which you can pull forward when you leave.
9 . If a load is 10 feet long, it must be secured by a minimum of ____ tie-downs.
On flatbed trailers and trailers without sides, cargo must be tied down. There should be at least one tie-down for every 10 feet of cargo. Regardless of the size of the cargo, at least two tie-downs must be used.
10 . Braking mechanisms are located inside:
Drum brakes are attached to the wheels and located on the axles of a vehicle. The braking mechanisms that cause the vehicle to stop can be found inside of a drum brake.
11 . In low temperatures, bridges usually freeze:
In low temperatures, bridges usually freeze before other road surfaces. When driving in cold weather, especially when weather conditions have been wet, use special caution on bridges and overpasses.
12 . When starting the engine of a truck with a trailer, you can tell that your vehicle's ABS is not working if:
When turning on your vehicle's engine, the lights on the dash should come on and then turn off. If the ABS malfunction light stays on, the system is not working properly. In the case of a truck with a trailer, if the yellow light on the left rear of the trailer stays on once the engine has been started, the system is not working properly.
13 . When transporting cargo, drivers must check the securement of the cargo every:
The securement of cargo must be checked before beginning a trip, within the first 50 miles of a trip, and then again every three hours or 150 miles thereafter.
14 . If the coolant temperature gauge goes above the highest safe temperature, you should:
If the coolant temperature gauge goes above the highest safe temperature, you should stop driving as soon as possible and try to figure out what is wrong. There could be an issue in your vehicle that could lead to engine failure and possibly a fire.
2024 Idaho | Frequently Asked Questions
A CDL Class A license in Idaho is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle is heavier than 10,000 pounds. It typically covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Idaho allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more if the towed vehicle exceeds 10,000 pounds.
To obtain a Class A CDL license in Idaho, you must be at least 18 years old (21 for interstate driving), possess a valid Idaho non-commercial license, pass a vision test, and successfully complete knowledge and skills tests. You also need to provide proof of age, identity, residency, and social security number. Medical requirements must be met too.
In Idaho, you must be at least 18 years old to qualify for a Class A CDL license for intrastate driving (within Idaho). However, you must be at least 21 years old to drive a commercial vehicle across state lines, carry hazardous materials, or transport interstate freight within the state.
While specific endorsements are not required for a Class A CDL license, they can provide additional permissions. Endorsements include H for hazardous materials, N for tank vehicles, P for passenger vehicles, S for school buses, T for double/triple trailers. Each endorsement requires passing additional knowledge and skills tests.
The Class A CDL skills test in Idaho encompasses three main parts: a pre-trip inspection, a basic vehicle control test, and an on-road driving test. The pre-trip inspection assesses your ability to inspect your vehicle before driving. The basic control test evaluates your ability to maneuver and control the vehicle. The on-road test examines your on-road driving skills.
Yes, there are limitations. Class A CDL license holders in Idaho are not allowed to operate a vehicle with a Gross Vehicle Weight Rating (GVWR) of more than 26,001 pounds, or tow a vehicle heavier than 10,000 pounds unless they have the appropriate endorsements. They also cannot transport hazardous materials without an H endorsement or operate a passenger vehicle without a P endorsement.
In Idaho, the written Class A Commercial Driver's License (CDL) test is typically administered in English. However, some locations may offer the test in Spanish. It is important to note that all CDL holders must be able to read and speak English well enough to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class A CDL written test in Idaho if you have a disability. The Idaho Transportation Department complies with the Americans with Disabilities Act (ADA) and provides reasonable accommodations for applicants with disabilities. However, you must still meet the essential eligibility requirements for obtaining a CDL.
If you fail the Class A CDL written test in Idaho, you'll be allowed to retake the test. However, you have to wait at least three days before you can retake it. If you fail three times, you must wait 30 days before retesting. There's no limit to the number of times you can retake the test, but each attempt requires a new fee.