Bus #2
Bus Driver Testing | Florida 2025 #2 Page 3 of 3
Train for FREE online with our FL bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Florida in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
15 . When students are being picked up by a school bus:
A school bus driver should load and unload students only at designated stops that have been approved by appropriate school district officials.
16 . When performing a pre-trip inspection and looking into the fifth wheel gap, you should:
When inspecting a trailer coupling, you should make sure the fifth wheel locking jaws are closed around the shank of the kingpin, not the head of the kingpin.
17 . When performing the stop/start maneuver as a part of the skills test, you should:
Decelerate smoothly.
During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.
18 . The inside rearview mirror of a school bus is used to:
See in front of the bus.
On a school bus, the overhead inside rearview mirror is used to monitor passenger activity inside the bus.
19 . The overhead rearview mirror is located:
In a school bus, the overhead rearview mirror is mounted directly above the windshield on the driver’s side.
20 . If a bus is equipped with outside convex mirrors, they will be located:
On top of the bus.
Outside convex mirrors on a school bus are located below the outside flat mirrors. They are used to see a wide view of traffic, clearance, and students around the bus.
Search the best driving school in your neighbourhood
2025 Florida | Frequently Asked Questions
To acquire a CDL Tank endorsement in Florida, you must first possess a valid Commercial Driver's License (CDL). Next, study the tank vehicle section of the Florida CDL manual. Then, schedule and pass the tank vehicle endorsement test at a Florida DMV office. This test includes multiple-choice questions about operating tank vehicles and transporting liquids.
To obtain a CDL Tank license, you must first have a valid Commercial Driver's License (CDL). You also need to pass the Tank Vehicle written test, which covers the specific rules and safety measures for tank vehicles. Studying the tank vehicle section in the CDL manual will help you prepare for this test.
Specific training or experience is not mandatory for a CDL Tank endorsement in Florida. However, it's important to thoroughly understand the tank vehicle operations and safety procedures. Studying the tank vehicle section of the Florida CDL manual is crucial. While not required, some applicants may find practical training beneficial for passing the endorsement test.
Yes, to obtain a CDL Tank endorsement in Florida, you must pass an additional written test. This test covers specific knowledge related to tank vehicle operation and safety procedures. It includes multiple-choice questions and is separate from the general CDL written test. The information for the test can be found in the Florida CDL manual's tank vehicle section.
The written test for the CDL Tank endorsement in Florida covers a variety of subjects including, but not limited to, inspecting tank vehicles, recognizing high and low center of gravity and its effects, understanding outage requirements, handling bulkheads, and safety procedures for driving and parking tank vehicles. The Florida CDL manual provides detailed information on these topics.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It tests your understanding of inspecting tank vehicles, recognizing high center of gravity and its effects, handling smooth bore tanks, emergency procedures, and dealing with special situations like crossing railroad tracks or long slopes.
Yes, there are certain limitations for drivers with a CDL Tank endorsement in Florida. They are only permitted to operate tank vehicles and are not allowed to haul hazardous materials unless they also possess a Hazardous Materials (HazMat) endorsement. Additionally, they must comply with all federal and state regulations regarding weight limits, vehicle inspections, and hours of service.
No, you cannot transport liquid or gas materials without a valid CDL Tank endorsement in Florida. This endorsement is necessary to operate a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current commercial driver's license in Florida. You don't need to apply for a fresh license, but you will need to pass the Tank Vehicle endorsement test. It's recommended to study the Florida CDL handbook and take practice tests before attempting the endorsement test.
Yes, there are specific regulations and prerequisites in place for handling hazardous materials with a CDL Tank endorsement in Florida. These include obtaining a hazardous materials endorsement, passing a written test, undergoing a background check, and completing a TSA threat assessment. Additionally, drivers must comply with federal regulations such as proper labeling, placarding, and handling of hazardous materials.
