Bus Driver Testing | Massachusetts 2024 #2

Train for FREE online with our MA bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Massachusetts in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . Why should a school bus stop a short distance from students who are waiting to board?

The students will have to walk to the bus, making it easier for the driver to watch their movements.

The students will usually be waiting on a sidewalk.

The students may get scared of a school bus coming toward them.

Buses are difficult to drive.

When being stopped to load students, a school bus should stop at least 10 feet away from the waiting students. This forces the students to walk toward the bus, making it easier for the driver to keep track of their movements.

2 . Properly adjusted outside convex mirrors should allow the driver to see:

The entire side of the bus up to the mirror mounts.

The front of the bus.

The rear door of the bus.

The top of the bus.

On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus, the entire side of the bus up to the mirror mounts, and where the front of each rear tire touches the ground.

3 . In a school bus, where is the overhead inside rearview mirror located?

Above the windshield on the driver’s side of the bus

Above the door on the passenger side of the bus

Above the emergency door in the rear

Under the driver's seat

On a school bus, the overhead inside rearview mirror is mounted directly above the windshield on the driver’s side of the bus. Its purpose is to allow the driver to monitor passenger activity inside the bus.

4 . If equipped, a header board should:

Be damaged.

Be loose.

Be strong enough to contain cargo.

Light up when the engine is started.

When checking a header board during the vehicle inspection test, you should ensure that it is secure, free of damage, and strong enough to contain cargo.

5 . If a parent asks you to change the location of a bus stop, you should:

Agree and pick up students at the new bus stop.

Continue to pick up students at the original bus stop.

Change the bus stop if the new location fits into your route.

Use both locations as bus stops.

A school bus driver does not have the authority to change the location of a school bus stop. Only appropriate school district officials can determine the locations of bus stops.

6 . When conducting a vehicle inspection, you will need to identify all of the following, except:

The power steering belt.

The water pump belt.

The alternator belt.

The water compressor belt.

During the vehicle inspection test, you must check the power steering belt, water pump belt, alternator belt, and air compressor belt for snugness, cracks, or frays. If any of these components are not belt-driven, you must tell the examiner which one(s), and verify that they are operating properly, mounted securely, and not damaged or leaking.

7 . When asked to complete a driver's side parallel parking maneuver, you should:

Pass the parking space while backing, then pull forward into it.

Pull forward past the parking space, then back into it.

Pull forward into the parking space without passing it first.

Back into the parking space without passing it first.

You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Massachusetts | Frequently Asked Questions

A CDL Class A license in Massachusetts is defined as a commercial driver's license that permits the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 lbs or more, provided the towed vehicle(s) have a GVWR over 10,000 lbs. This typically includes tractor-trailers and truck and trailer combinations.

With a Class A CDL license in Massachusetts, you can operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, and livestock carriers. This license also allows you to tow vehicles over 10,000 pounds. Essentially, it covers any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more.

To obtain a Class A CDL license in Massachusetts, you must be at least 18 years old (21 for interstate travel), possess a valid driver's license, pass a vision test, and obtain a medical certificate. You must also pass a written knowledge test and a skills test, which includes a pre-trip vehicle inspection, a basic controls test, and an on-road driving test.

In Massachusetts, you must be at least 18 years old to qualify for a Class A CDL license. However, you need to be 21 years old if you intend to drive across state lines, transport passengers, or haul hazardous materials. It's crucial to adhere to these age restrictions for safe and legal operation of commercial vehicles.

Specific endorsements aren't required for a Class A CDL license in Massachusetts, but they allow you to operate specialized vehicles. These include endorsements for double/triple trailers, passenger vehicles, school buses, tank vehicles, and hazardous materials. Each endorsement requires passing additional knowledge and/or skills tests.

The Class A CDL skills test in Massachusetts consists of three parts: a pre-trip vehicle inspection, a basic controls test, and an on-road driving test. The pre-trip inspection tests your ability to inspect your vehicle before driving. The basic controls test evaluates your ability to maneuver and control the vehicle. The on-road driving test assesses your ability to drive the vehicle in various road and traffic conditions.

Yes, there are limitations for Class A CDL license holders. For instance, in Massachusetts, if you're under 21, you're restricted to intrastate driving. Some endorsements like HAZMAT or passenger require additional testing and background checks. Also, certain medical conditions may limit your ability to operate commercial vehicles. Violations can result in temporary or permanent disqualification of your CDL.

Yes, in Massachusetts, the written Class A CDL test can be taken in multiple languages other than English. These include Spanish and Portuguese. However, federal regulations require all CDL holders to have a basic understanding of English for safety reasons. This includes being able to read road signs, communicate with officials, and comprehend driving regulations.

Yes, you can request accommodations for the Class A CDL written test in Massachusetts if you have a disability. The Massachusetts Registry of Motor Vehicles (RMV) provides reasonable accommodations in accordance with the Americans with Disabilities Act. It's recommended to contact the RMV in advance to arrange these accommodations.

Yes, you can retake the Class A CDL written test in Massachusetts if you don't pass on your first attempt. There is a waiting period of at least 24 hours before you can retake the test. Please note, there is a retesting fee each time. It's recommended to study thoroughly to increase your chances of passing on the next attempt.