Bus #2
Bus Driver Testing | Massachusetts 2024 #2
Train for FREE online with our MA bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Massachusetts in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . Why should a school bus stop a short distance from students who are waiting to board?
Buses are difficult to drive.
When being stopped to load students, a school bus should stop at least 10 feet away from the waiting students. This forces the students to walk toward the bus, making it easier for the driver to keep track of their movements.
2 . Properly adjusted outside convex mirrors should allow the driver to see:
The top of the bus.
On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus, the entire side of the bus up to the mirror mounts, and where the front of each rear tire touches the ground.
3 . In a school bus, where is the overhead inside rearview mirror located?
Under the driver's seat
On a school bus, the overhead inside rearview mirror is mounted directly above the windshield on the driver’s side of the bus. Its purpose is to allow the driver to monitor passenger activity inside the bus.
4 . If equipped, a header board should:
Light up when the engine is started.
When checking a header board during the vehicle inspection test, you should ensure that it is secure, free of damage, and strong enough to contain cargo.
5 . If a parent asks you to change the location of a bus stop, you should:
Use both locations as bus stops.
A school bus driver does not have the authority to change the location of a school bus stop. Only appropriate school district officials can determine the locations of bus stops.
6 . When conducting a vehicle inspection, you will need to identify all of the following, except:
The water compressor belt.
During the vehicle inspection test, you must check the power steering belt, water pump belt, alternator belt, and air compressor belt for snugness, cracks, or frays. If any of these components are not belt-driven, you must tell the examiner which one(s), and verify that they are operating properly, mounted securely, and not damaged or leaking.
7 . When asked to complete a driver's side parallel parking maneuver, you should:
Back into the parking space without passing it first.
You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.
2024 Massachusetts | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Massachusetts, you must first possess a valid commercial driver's license (CDL). Next, study for the Doubles/Triples endorsement test using the Massachusetts CDL manual. Once prepared, schedule and pass the written test at a local RMV office. Remember that on-road skill tests are not required for this endorsement.
To obtain a CDL Doubles/Triples license, you must first have a valid CDL. You then need to study for the Doubles/Triples endorsement test, which can be found in the CDL manual. Once you're ready, schedule and pass the written test at a local RMV office. No on-road skill tests are necessary for this endorsement.
While specialized experience or training isn't mandatory for a CDL Doubles/Triples endorsement, it's recommended to familiarize yourself with handling such vehicles. The most important requirement is passing the knowledge test. Studying the state's CDL manual thoroughly will provide necessary information. Practical training, although not required, can be beneficial for real-world application.
Yes, to obtain a CDL Doubles/Triples endorsement in Massachusetts, you must pass an additional written knowledge test specifically related to the rules and safety regulations for driving double and triple trailers. This test is separate from the general CDL written exam. The information for the test can be found in the state's CDL manual.
Actually, for the CDL Doubles/Triples endorsement in Massachusetts, you only need to pass a written knowledge test. There is no specific skills test or road test required. The written test covers topics like coupling and uncoupling, inspecting doubles and triples, and managing cargo. Mastery of these topics is essential for passing the test.
No, it's not permissible. In Massachusetts, operating double or triple trailers requires a valid Class A Commercial Driver's License (CDL) with a Doubles/Triples endorsement. Driving these vehicles without the proper endorsement is against the law and can lead to significant penalties, including fines and potential loss of your CDL.
You can add the CDL Doubles/Triples endorsement to your current commercial driver's license in Massachusetts. You do not need to initiate a new application for a CDL. Instead, you apply for the endorsement, pass the required written knowledge test, and the endorsement is added to your existing CDL.
Yes, there are limitations for drivers holding a CDL Doubles/Triples endorsement in Massachusetts. They can only operate vehicles that are specifically designed to pull two or three trailers. Also, they must comply with specific weight and length restrictions. Additionally, certain roads or highways may have restrictions on the use of double/triple trailers.
In Massachusetts, the maximum weight for a vehicle (including any load) is 80,000 pounds. The maximum length for a semi-trailer in a doubles configuration is 28.5 feet, and for a triple configuration, each trailer must not exceed 28.5 feet. However, specific restrictions can vary depending on the roads or highways used.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include maintaining a safe following distance, proper coupling and uncoupling of trailers, and regular vehicle inspections. Drivers must also be skilled in handling the high rollover risk and the effects of "crack-the-whip" phenomena associated with these types of vehicles. Failure to adhere can lead to penalties or loss of endorsement.