Idaho Driver's Examination

Bus #1

FREE Online Bus Driver Testing | Idaho 2024

Train for FREE online with our ID bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Idaho in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When loading a trailer, you should:

Place as little weight as possible over the axles.

Place a well-balanced amount of weight over the axles.

Not be concerned with how the weight is distributed.

A load of cargo must be properly balanced. Placing too much weight over an axle can damage the axle and make it more difficult for you to steer. Placing too little weight over an axle can cause poor traction, also leading to difficult handling.

2 . When making a left turn, you should start the turn:

Before reaching the center of the intersection.

No sooner than the center of the intersection.

After your rear wheels have passed the center of the intersection.

When making a left turn, you should wait until you reach the center of the intersection before actually beginning to turn. Due to off-tracking, the left side of your vehicle could hit another driver if you begin turning too early.

3 . You should ____ if the low pressure warning signal activates while you are driving.

Stop where you are and park

Exit the roadway as soon as safely possible

Continue driving normally

If the low pressure warning signal activates while you are driving, it is important that you safely exit the roadway as soon as possible and park your vehicle. If the air pressure gets too low, the brakes will no longer work well enough for you to stop safely.

4 . When alley docking, you should first:

Position your vehicle directly in front of the alley.

Back up directly in front of the alley.

Stop parallel to the outer boundary of the alley.

If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.

5 . If a load is 10 feet long, it must be secured by a minimum of ____ tie-downs.

Two

Three

Four

On flatbed trailers and trailers without sides, cargo must be tied down. There should be at least one tie-down for every 10 feet of cargo. Regardless of the size of the cargo, at least two tie-downs must be used.

6 . If there is a fire in your vehicle, you should not:

Park in an area away from buildings, trees, brush, and other vehicles.

Pull into a service station.

Notify emergency services of your problem and your location.

In the event of a vehicle fire, you should leave the road and stop in an open area. Do not pull into a service station as fuels at the service station could catch fire. Report the fire and your location to emergency services.

7 . What does an air compressor do in an air brake system?

It pumps air into the air storage tanks.

It fills the tires.

It moves air to the back of the truck.

In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Idaho | Frequently Asked Questions

A CDL Class A license in Idaho is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle is heavier than 10,000 pounds. It typically covers vehicles like tractor-trailers, truck and trailer combinations.

A Class A CDL license in Idaho allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more if the towed vehicle exceeds 10,000 pounds.

To obtain a Class A CDL license in Idaho, you must be at least 18 years old (21 for interstate driving), possess a valid Idaho non-commercial license, pass a vision test, and successfully complete knowledge and skills tests. You also need to provide proof of age, identity, residency, and social security number. Medical requirements must be met too.

In Idaho, you must be at least 18 years old to qualify for a Class A CDL license for intrastate driving (within Idaho). However, you must be at least 21 years old to drive a commercial vehicle across state lines, carry hazardous materials, or transport interstate freight within the state.

While specific endorsements are not required for a Class A CDL license, they can provide additional permissions. Endorsements include H for hazardous materials, N for tank vehicles, P for passenger vehicles, S for school buses, T for double/triple trailers. Each endorsement requires passing additional knowledge and skills tests.

The Class A CDL skills test in Idaho encompasses three main parts: a pre-trip inspection, a basic vehicle control test, and an on-road driving test. The pre-trip inspection assesses your ability to inspect your vehicle before driving. The basic control test evaluates your ability to maneuver and control the vehicle. The on-road test examines your on-road driving skills.

Yes, there are limitations. Class A CDL license holders in Idaho are not allowed to operate a vehicle with a Gross Vehicle Weight Rating (GVWR) of more than 26,001 pounds, or tow a vehicle heavier than 10,000 pounds unless they have the appropriate endorsements. They also cannot transport hazardous materials without an H endorsement or operate a passenger vehicle without a P endorsement.

In Idaho, the written Class A Commercial Driver's License (CDL) test is typically administered in English. However, some locations may offer the test in Spanish. It is important to note that all CDL holders must be able to read and speak English well enough to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.

Yes, you can request accommodations for the Class A CDL written test in Idaho if you have a disability. The Idaho Transportation Department complies with the Americans with Disabilities Act (ADA) and provides reasonable accommodations for applicants with disabilities. However, you must still meet the essential eligibility requirements for obtaining a CDL.

If you fail the Class A CDL written test in Idaho, you'll be allowed to retake the test. However, you have to wait at least three days before you can retake it. If you fail three times, you must wait 30 days before retesting. There's no limit to the number of times you can retake the test, but each attempt requires a new fee.