Bus Driver Testing | Arkansas 2026 #1

Train for FREE online with our AR bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Arkansas in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . During a basic vehicle control skills test, what is considered an encroachment?

The vehicle crossing over an exercise boundary line.

A driver executing a single pull-up.

A driver placing the vehicle in neutral and applying the parking brake.

The vehicle stalling while the driver shifts gears.

An encroachment during the basic vehicle control skills test is when an exercise boundary line is touched or crossed by any portion of the applicant's vehicle. Every encroachment will be counted as an error.

2 . When making a stop to pick up students, a driver should ensure all surrounding traffic has stopped before:

Opening the door and signaling for students to approach the bus.

Turning on the alternating red lights.

Pulling over to the side of the road.

Braking.

When stopping to pick up students, a school bus driver should make sure all nearby traffic has stopped before they open the door and signal for the waiting students to approach the bus.

3 . School buses:

Are never equipped with ABS.

Are only equipped with ABS if students who are younger than 10 years of age will be on the bus.

May be equipped with ABS.

In general, school buses manufactured after 1998 or 1999 must be equipped with an Anti-Lock Braking System (ABS). Many older buses are equipped with ABS as well.

4 . If a school bus stalls on a railroad track:

Students should remain on the bus.

Students should be evacuated to a location near the bus.

Students should be evacuated and moved away from the bus.

If a school bus becomes stalled or trapped on railroad tracks, the driver should immediately evacuate everyone from the bus. If the bus is struck by a train, to avoid any flying debris, the students should be led far away from the bus at an angle that is in the direction of any oncoming train.

5 . The overhead rearview mirror is located:

On the outside left of the bus.

On the outside right of the bus.

Above the windshield inside the bus.

In a school bus, the overhead rearview mirror is mounted directly above the windshield on the driver’s side.

6 . When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?

Not driving over curbs or sidewalks

Stopping behind crosswalks

Driving in the leftmost lane if more than one driving lane is available

Finishing a right turn in the rightmost lane

During the on-road driving skills test, make sure you do not put your vehicle over curbs, sidewalks, or lane markings. Stop behind stop lines, crosswalks, or stop signs. On multiple-lane roads, complete turns in the proper lane. Always move to or remain in the rightmost lane, unless the lane is blocked.

7 . As students exit a school bus, the driver should watch to ensure that they:

Are leaving in pairs.

Do not get caught on the handrail or door.

Do not talk while exiting.

It is possible for students to be injured, or even killed, as a result of their clothing, accessories, or bodies getting caught on a handrail or door while exiting a school bus. The driver should closely watch students as they exit to ensure that they have all unloaded the bus successfully and have reached a safe location.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2026 Arkansas | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in Arkansas, you must first have a valid CDL. Next, study the Doubles and Triples section of the Arkansas CDL manual, then take and pass the Doubles/Triples knowledge test at your local DMV. Finally, pay the required fee to add the endorsement to your license. Be sure to check any other requirements from the Arkansas State Police.

To obtain a CDL Doubles/Triples license, you'll first need a valid Commercial Driver's License (CDL). You must then study the specific section for Doubles/Triples in the CDL manual. After studying, you'll need to pass the Doubles/Triples knowledge test at your local DMV. Lastly, pay the necessary fee to add the endorsement to your existing license.

While Arkansas doesn't mandate specific training for a CDL Doubles/Triples endorsement, it's beneficial to have hands-on experience. Studying the Doubles/Triples section of the CDL manual is essential. Passing the Doubles/Triples knowledge test at your local DMV is required. Some choose to attend a CDL training school for practical experience before attempting the test.

Yes, to obtain a CDL Doubles/Triples endorsement in Arkansas, you are required to pass the Doubles/Triples Knowledge Test. This test covers specific information related to handling, inspecting, and coupling/uncoupling double and triple trailers. It is an additional written examination beyond the basic CDL test.

For the CDL Doubles/Triples endorsement in Arkansas, there is no specific skills or maneuvers test. The endorsement only requires a knowledge test, which covers information such as coupling and uncoupling, inspecting doubles and triples, and the handling and stability of these vehicles. However, practical experience driving these types of vehicles can be beneficial.

No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Arkansas. The endorsement is required by federal law and ensures that drivers have the necessary knowledge and skills to safely operate such vehicles. Operating without the proper endorsement can lead to fines, penalties, and potentially the loss of your CDL.

You can append the CDL Doubles/Triples endorsement to your current CDL. You don't need to initiate a new application for a CDL. However, you will have to pass the Doubles/Triples Knowledge Test and pay the required fees to add this endorsement to your existing license.

Yes, there are some constraints for drivers holding a CDL Doubles/Triples endorsement in Arkansas. Drivers must follow federal size and weight regulations. Also, these vehicles are not allowed on some roads due to their size. Furthermore, drivers must have a good driving record and maintain their physical health to keep their CDL and endorsement valid.

In Arkansas, double trailers cannot exceed 81.5 feet in length, and triple trailers are not permitted. The maximum weight for any vehicle or combination is 80,000 pounds on Interstate highways. However, specific weight limits may vary depending on the axle number and spacing. It's crucial to check both state and federal regulations for precise requirements.

Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include maintaining a safe following distance, checking all connections regularly, and understanding the high rollover risk. Drivers must also be trained in coupling and uncoupling procedures, and understand the different handling required for these types of vehicles.