Double #2

Double Triple Test | Vermont 2024 #2 Page 2 of 3

Train for FREE with our Vermont CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a VT CDL double triple license in 2024, practice as much as.. Read More

Train for FREE with our Vermont CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a VT CDL double triple license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.

20
16
20
To Pass

8 . You should maintain at least ____ of following distance per every 10 feet of your vehicle when you are traveling more slowly than 40 mph.

At speeds below 40 mph, you should allow at least one second of following distance for every 10 feet of your vehicle. Follow the same formula when traveling at faster speeds, then add one additional second to your following distance. Remember that larger vehicles require more space to stop than smaller vehicles.

9 . Which gas would cause concern due to a faulty exhaust system?

A leaking exhaust system can introduce carbon monoxide, which is poisonous, into the cab or sleeper berth.

10 . Rust around wheel nuts may mean:

Rust around wheel nuts can indicate that the nuts are loose. If you find rust near the wheel nuts, check their tightness before beginning to drive.

11 . Which of the following is acceptable if found during a pre-trip inspection?

When checking the tires as part of a pre-trip inspection, make sure the tires have sufficient tread. There should be at least 4/32 of an inch of tread in every major groove of the front tires, and at least 2/32 of an inch of tread depth on the other tires. Tire sizes should not be mismatched.

12 . When driving a vehicle, rough acceleration is:

When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.

13 . During a walk-around inspection, ensure the release arm is properly seated and the safety latch or lock is:

When inspecting the fifth wheel before a trip, you should ensure that the release arm is properly seated and the safety latch or lock is engaged. All components should be present and in proper working condition.

14 . Slow down and be extra careful:

Slow down and be especially careful when driving in and around work zones, in places where the pavement drops off sharply at the edge of the road, when foreign objects are present on the road, and on freeway on- and off-ramps.

Wait, before you go

Ace Your Vermont CDL Written Test with our Guaranteed Cheat Sheet

Take me to the Cheat Sheet No, Thanks

See the exact questions that will be on the 2024 Vermont DMV exam.

Click Here
Full Cheat Sheet
Ace Your VT DMV Written Test 1
Ace Your VT DMV Written Test 2
Ace Your VT DMV Written Test 3
Ace Your VT DMV Written Test 4