Bus #1
Bus Driver Testing | New Mexico 2024 #1 Page 2 of 3
Train for FREE online with our NM bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New Mexico in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
8 . Bus stops may be changed by:
Official school bus routes and stops are established by the local school district. Drivers should never change a stop location without the written approval of an appropriate district official.
9 . ABS allows a driver to:
The purpose of an Anti-Lock Braking System (ABS) is to help prevent wheel lockup and help a driver maintain control of their vehicle when braking on a slippery surface.
10 . When encountering a railroad crossing during the driving test, you should:
During the on-road driving test, you must not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in a railroad crossing.
11 . Loading and unloading a bus:
More students are killed each year during loading or unloading of school buses than while riding on school buses. Therefore, it is critical that school bus drivers follow appropriate safety procedures during loading and unloading.
12 . When dropping off students at a school, a driver should:
When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.
13 . Before a trip, you should make sure that:
When checking your vehicle's pedals during a pre-trip inspection, you should ensure that there is nothing under or around the pedals that will obstruct their use. Make sure the pedals are in proper working condition and that the surfaces of the pedals are grooved, if applicable.
14 . Active railroad crossings:
Railroad crossings with control devices to regulate traffic are known as active crossings. Control devices may include regulators such as flashing red lights, warning bells, and gates. Drivers are required by law to follow instructions given by control devices.
2024 New Mexico | Frequently Asked Questions
A CDL Class A license in New Mexico allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 lbs or more, provided the Gross Vehicle Weight Rating (GVWR) of the vehicle(s) being towed is over 10,000 lbs. It includes tractor-trailers, truck and trailer combinations, and flatbeds.
A Class A CDL (Commercial Driver's License) in New Mexico allows you to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 lbs or more, provided the Gross Vehicle Weight Rating (GVWR) of the vehicle(s) being towed is over 10,000 lbs. This includes tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds.
To obtain a Class A CDL in New Mexico, you must be at least 18 years old (21 for interstate driving), possess a valid New Mexico driver's license, and pass a vision test. You'll also need to pass a written knowledge exam, obtain a commercial learner's permit (CLP), and pass a skills test, which includes a pre-trip vehicle inspection, a basic control skills test, and an on-road driving exam.
In New Mexico, you must be at least 18 years old to qualify for a Class A CDL license. However, this will only allow you to operate a commercial vehicle within the state (intrastate). If you intend to drive a commercial vehicle across state lines (interstate), or carry hazardous materials, you must be at least 21 years old.
Specific endorsements aren't required for a Class A CDL license in New Mexico, but they may be necessary depending on the type of vehicle you plan to drive or the cargo you'll transport. Endorsements include: T for double/triple trailers, P for passenger vehicles, N for tank vehicles, H for hazardous materials, and S for school buses.
The Class A CDL skills test in New Mexico encompasses three parts: a pre-trip vehicle inspection to verify your ability to assess the safety of your vehicle, a basic control skills test to evaluate your ability to control the vehicle (like backing up), and an on-road driving test where you'll demonstrate safe driving practices in various road and traffic conditions.
Yes, there are limitations. Class A CDL license holders in New Mexico are not allowed to operate a vehicle with a Gross Vehicle Weight Rating (GVWR) of more than 26,001 pounds, or tow a vehicle heavier than 10,000 pounds, unless they have the appropriate endorsements. Also, drivers under 21 are restricted to intrastate transportation only.
Yes, it's possible. In New Mexico, the Class A CDL written test is available in English and Spanish. However, federal regulations require that all CDL holders must be able to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, accommodations can be made for the Class A CDL written test in New Mexico for individuals with disabilities. However, you must provide appropriate documentation of your disability and specific accommodation needs. It's recommended to contact the New Mexico Motor Vehicle Division beforehand to arrange these accommodations.
Yes, if you don't pass the Class A CDL written test in New Mexico, you can retake it. However, you must wait at least one day before retesting. If you fail the test three times, you must wait 6 months before trying again. It's important to thoroughly study and prepare to increase your chances of passing.