Bus #1

Bus Driver Testing | New Hampshire 2026 #1 Page 2 of 3

Train for FREE online with our NH bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New Hampshire in 2026, learn how to become a bus driver and then practice as much as.. Read More

Train for FREE online with our NH bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New Hampshire in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

20
16
20
To Pass

8 . School buses:

Most commercial vehicles manufactured after 1998 or 1999 are required to be equipped with Anti-Lock Braking Systems (ABS). Many older buses are also equipped with ABS.

9 . The overhead rearview mirror is located:

On a school bus, the overhead inside rearview mirror is mounted directly above the windshield on the driver’s side of the bus. This mirror should be used to monitor students inside the bus.

10 . An outside convex mirror is properly adjusted if:

The driver can see the front windshield. The outside right and left side convex mirrors on a school bus should be positioned so that the driver can see the fronts of the rear tires touching the ground; each side of the bus up to the mirror mounts; and at least one traffic lane on either side of the bus.

11 . The overhead inside rearview mirror should be positioned to show:

The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

12 . During a basic vehicle control skills test, you may be asked to:

Pull forward into a parking space. Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

13 . If exiting a bus, a driver must:

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.

14 . When taking the driving test and asked to make a turn, you should:

When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.

See the exact questions that will be on the 2026 New Hampshire DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.

Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.

2026 New Hampshire | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in New Hampshire, you must already possess a valid CDL. You'll need to pass a written knowledge test specific to doubles/triples operation. Studying the New Hampshire CDL Handbook's section on doubles/triples is recommended. Once you've passed the test, the endorsement will be added to your CDL.
To obtain a CDL Doubles/Triples license, you firstly need to have a valid commercial driver's license (CDL). Next, you will need to pass a knowledge test specific to operating doubles/triples. This test covers topics such as coupling and uncoupling, inspecting doubles and triples, and the proper procedures for pulling double/triple trailers.
While no specific experience is mandated by law for a CDL Doubles/Triples endorsement, it's crucial you're proficient in operating a commercial vehicle. The endorsement requires passing a written knowledge test on handling such vehicles. Training, though not compulsory, can be beneficial for understanding vehicle handling, coupling/uncoupling, and inspection procedures.
Yes, to get a CDL Doubles/Triples endorsement, you must pass a specific written knowledge test. The test covers areas such as coupling and uncoupling, inspecting doubles and triples, and the correct procedures for pulling double/triple trailers. The endorsement does not require a separate skills test.
Actually, for a CDL Doubles/Triples endorsement, you won't need to demonstrate any specific skills or maneuvers in a road test. The endorsement requires only a written knowledge test. This test focuses on areas like coupling and uncoupling, inspecting doubles and triples, and proper procedures for pulling double/triple trailers.
No, it is not permissible. To legally operate double or triple trailers in New Hampshire, you must have a valid Commercial Driver's License (CDL) with a Doubles/Triples endorsement. Operating such vehicles without the proper endorsement can lead to legal penalties, including fines and potential loss of your CDL.
You can add the CDL Doubles/Triples endorsement to your existing CDL. You'll need to pass the Doubles/Triples knowledge test. Once you pass, the endorsement will be added to your CDL. It's not necessary to initiate a completely new application for a CDL unless your current one is not valid.
Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. One major constraint is that they can only drive double and triple trailers on highways and interstates. They are generally not allowed to drive these large vehicles in residential areas. Also, specific rules about weight and length of the trailers must be adhered to, as per federal and state regulations.
In New Hampshire, the maximum weight for a vehicle with a double/triple trailer is 80,000 pounds. The maximum length of a trailer is 53 feet. However, the combined length of the truck and double trailers cannot exceed 75 feet. For triples, the total length should not exceed 65 feet. It's important to check federal regulations as well, as they may have additional restrictions.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include checking all connections regularly, maintaining safe following distances, and taking extra care when turning or changing lanes due to the increased length of the vehicle. Additionally, drivers must be aware of the "crack-the-whip" effect that can happen when driving at high speeds or making sudden lane changes.

Wait, before you go

Ace Your New hampshire CDL Written Test with our Guaranteed Cheat Sheet

See the exact questions that will be on the 2026 New Hampshire DMV exam.