While students are boarding a school bus, if the driver cannot account for a student outside, they should secure the bus, take the key with them, and check around and underneath the bus for the missing student.

Turn the bus off and take the key.

Ask a student to keep an eye on the steering wheel.

Backing a school bus is strongly discouraged and should only be done if there is no safe alternative. If you must drive in reverse, be sure to follow all proper safety protocol.

Only to be done in the morning.

Railroad crossings that do not display any traffic control devices are known as passive crossings. The decision to proceed across tracks at a passive crossing is entirely up to the driver.

Does not have any control devices.

The process of loading or unloading students from a school bus requires a driver's full concentration. If there is a behavioral issue on the bus, wait until the exiting students are safely off the bus and out of the way before you address the problem on the bus.

Wait until the students are done unloading and then take care of the disturbance.

Immediately walk to the back of the bus and take care of the disturbance while students unload.

Wait until the students are done unloading and then take care of the disturbance.

Have a student who is closer to the disturbance handle the situation while you supervise unloading.

When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.

Secure the bus by turning off the engine.

Leave the key in the ignition, if leaving the driver’s compartment.

Read a book while students unload.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.

Be turned to face their vehicle.

Hop directly from their seat to the ground.

Maintain at least one point of contact with their vehicle.

Be turned to face their vehicle.

Bus Driver Testing | Kentucky 2024 #1 Page 3 of 3

Train for FREE online with our KY bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Kentucky in 2024, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

Bus Driver Testing | Kentucky 2024 #1 Page 3 of 3

15 . If a driver needs to exit a school bus to ensure all waiting students have boarded, the driver should:

16 . Backing a school bus is:

17 . A passive railroad crossing:

18 . If students on the bus cause a disturbance while other students are unloading, what should you do?

19 . When dropping off students at a school, a driver should:

20 . When exiting a vehicle, a driver should:

See the exact questions that will be on the 2024 DMV exam.

Wait, before you go