FREE Tennessee CDL Practice Test 2024 - DMV Practice Test Page 2 of 7
Your understanding of traffic signs, signals, right-of-way rules, trucking legislation, speed limits, vehicle inspection, and basic commercial vehicle safety will be put to the test in order to assist you in becoming a safer driver today. The Tennessee Commercial Driver License Manual and applicable Tennessee legislation are the basis for each of our 50 multiple-choice questions. A tip and an explanation are provided for each question. It's a good idea to read the explanations for each question to learn more about the rule that's being assessed.
50
40
20
8 . Brake pads should:
Not have any oil or grease on them.
When inspecting your brakes, you should verify that the shoes and pads do not have any oil, grease, or brake fluid on them.
9 . The tire load for a tire is stated:
The tire load, or the maximum safe weight that a tire can carry at a given pressure, is stated on the side of each tire.
10 . If a vehicle is equipped with an Anti-Lock Braking System (ABS), when the vehicle is started:
After starting the engine of a vehicle equipped with an Anti-Lock Braking System (ABS), the indicator light should come on and then turn off. If the light stays on, something is wrong with the ABS.
11 . If you require a hazardous materials endorsement, you will be required to:
To obtain a hazardous materials endorsement, you must first undergo a background check, which includes submission of your fingerprints.
12 . When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?
Finishing a right turn in the rightmost lane
During the on-road driving skills test, make sure you do not put your vehicle over curbs, sidewalks, or lane markings. Stop behind stop lines, crosswalks, or stop signs. On multiple-lane roads, complete turns in the proper lane. Always move to or remain in the rightmost lane, unless the lane is blocked.
13 . A posted maximum speed limit:
You should never drive faster than posted speed limits. For safety, you should slow down as conditions require.
14 . Being convicted of driving under the influence and losing your license while driving your personal vehicle:
If you lose the right to drive your personal vehicle due to an alcohol-related violation, this will result in the loss of your CDL for one year.
2024 Tennessee | Frequently Asked Questions
A CDL Class A license in Tennessee allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the Gross Vehicle Weight Rating (GVWR) of the vehicle(s) being towed exceeds 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations, and flatbeds.
A Class A CDL license in Tennessee allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, flatbeds, tanker vehicles, and livestock carriers. It is typically used for long-haul or over-the-road (OTR) trucking. The license covers any vehicle with a GCWR of 26,001 pounds or more if the towed vehicle is over 10,000 pounds.
To obtain a Class A CDL license in Tennessee, you must be at least 21 years old (18-20 years for intrastate driving), possess a valid Tennessee driver's license, pass a vision test, and successfully complete both a knowledge test and a skills test. You'll also need to provide proof of citizenship or lawful permanent residency.
In Tennessee, you must be at least 21 years old to qualify for a Class A Commercial Driver's License (CDL) for interstate driving. However, you can obtain a Class A CDL for intrastate driving (within Tennessee) if you are at least 18 years old.
Specific endorsements are not required for a Class A CDL license, but they can expand your job opportunities. Endorsements allow you to operate specific types of vehicles, such as tank vehicles (N), passenger vehicles (P), school buses (S), or vehicles carrying hazardous materials (H). Each endorsement requires passing additional knowledge and/or skills tests.
The Class A CDL skills test in Tennessee encompasses three parts: a pre-trip inspection to confirm that your vehicle is safe to drive, a basic vehicle control test to demonstrate your ability to maneuver and control the vehicle, and an on-road driving test where you'll be evaluated on your interaction with traffic and adherence to safety rules.
Yes, there can be limitations on Class A CDL license holders. These are typically represented as restrictions noted on the license. For example, if you take your skills test in a vehicle without air brakes, you'll have an "L" restriction and can't operate vehicles with air brakes. Other restrictions can relate to medical conditions or the specific type of vehicle used for testing.
In Tennessee, the Class A CDL written test is primarily administered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL holders must be able to read and speak English well enough to communicate with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class A CDL written test if you have a disability. The Tennessee Department of Safety & Homeland Security is committed to ensuring accessibility for all test takers. You should contact them directly ahead of your scheduled test to discuss your specific needs and arrange appropriate accommodations.
If you don't pass the Class A CDL written test, you can retake it. However, you must wait at least one day before retesting. There's no limit on how many times you can retake the test, but each attempt requires a fee. It's advisable to study thoroughly before retesting to increase your chances of passing.