FREE CDL Combination Vehicles Practice Test Online | Rhode Island 2024 Page 3 of 3
Train for FREE online with our Rhode Island CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a RI combination license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
15 . During a trip, landing gear should be:
Landing gear, or trailer supports, should always be completely raised before a vehicle is driven. Landing gear that is not entirely raised could catch on railroad tracks or other hazards on the roadway.
16 . A combination vehicle has ____ air line(s).
Every combination vehicle has two air lines: the service line and the emergency line.
17 . The trailer hand valve should not be used while you are driving because:
Never use the trailer hand valve while operating your vehicle. Using the trailer hand valve while driving can cause your trailer to skid.
18 . When braking with ABS, you should:
When operating a vehicle with an Anti-Lock Braking System (ABS), you should apply your brakes in the same manner as you would if operating a vehicle without ABS.
19 . If your vehicle gets stuck on railroad tracks, you should:
If your vehicle gets stuck on railroad tracks for any reason, you should immediately exit the vehicle and walk away from the tracks. Contact the proper emergency authorities.
20 . To help prevent a rollover, cargo should be:
If a vehicle is top-heavy, it is more likely to roll over. The weight of cargo should be positioned as low in a trailer as possible to minimize this risk.
Search the best driving school in your neighbourhood
2024 Rhode Island | Frequently Asked Questions
To acquire a CDL Tank endorsement in Rhode Island, you must already possess a Commercial Driver's License (CDL). Next, study the state's CDL manual section on tank vehicles. Then, schedule and pass the state's tank vehicle endorsement test at a DMV office. The test covers topics like inspecting tank vehicles, safe driving, and handling emergencies.
To obtain a CDL Tank license, it's essential to have a basic Commercial Driver's License (CDL). Then, study the CDL manual's tank vehicle section. The next step is to pass the tank vehicle endorsement test, which covers inspecting tank vehicles, safe driving, and handling emergencies. The test can be taken at a DMV office in your state.
While specific training or experience isn't mandatory for a CDL Tank endorsement, it's highly recommended. Understanding how to safely operate and handle emergencies involving tank vehicles is crucial. Studying the CDL manual's tank vehicle section and possibly taking a training course can greatly improve your chances of passing the tank vehicle endorsement test.
Yes, to obtain a CDL Tank endorsement, you must pass an additional written test. This test covers specifics about operating tank vehicles, including inspecting tank vehicles, safe driving practices, and handling emergencies. The test is based on the information found in the tank vehicle section of the CDL manual.
The written test for the CDL Tank endorsement covers various topics including: inspecting tank vehicles, recognizing the high center of gravity, driving tank vehicles safely, safe loading and unloading procedures, and understanding the effects of surge. It also covers handling emergencies specific to tank vehicles. All these subjects are outlined in the tank vehicle section of the CDL manual.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It assesses understanding of inspecting tank vehicles, safe driving practices, handling liquid surge, and emergency procedures. However, if you're taking a skills test in a tank vehicle, you'll be evaluated on general CDL skills such as vehicle inspection, basic controls, and road test.
Yes, there are limitations for drivers with a CDL Tank endorsement. They are only allowed to transport liquids in a tank vehicle and the tank must be permanently attached to the vehicle. The tank must have a capacity of 119 gallons or more, and the total capacity of all tanks on the vehicle must be 1,000 gallons or more.
No, a valid CDL Tank endorsement is required to transport liquid or gaseous materials in a tank vehicle. This endorsement ensures the driver has the necessary skills and knowledge to handle such materials safely. Driving a tank vehicle without the proper endorsement is illegal and can result in significant penalties, including fines and suspension of the commercial driver's license.
You can add the CDL Tank endorsement to your current license without needing to apply for a new one. However, you must pass the Tank Vehicle endorsement knowledge test. After successfully passing the test, the endorsement will be added to your existing CDL. Please note, there might be additional fees for adding an endorsement.
Yes, handling hazardous materials with a CDL Tank endorsement has specific prerequisites. The driver must have both a Tank Vehicle and Hazardous Materials endorsement on their CDL. This requires passing both the Tank Vehicle and Hazardous Materials knowledge tests, and in some cases, a background check by the Transportation Security Administration.
