Wyoming Driver's Examination

Passenger #2

FREE 2024 Wyoming CDL Practice Test for Passenger Endorsement Online

Train for FREE with our Wyoming CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WY DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . How does doubling your speed from 20 mph to 40 mph affect your vehicle's braking distance?

It stays about the same.

It increases slightly.

It doubles.

It quadruples.

Increasing your vehicle's speed will increase your vehicle's striking power and braking distance. Doubling your vehicle's speed from 20 to 40 mph will multiply its braking distance by four.

2 . On a bus, the driver:

Does not need to wear a seat belt.

Must always wear a seat belt.

Must wear a seat belt, but only during usual school hours.

Must wear a seat belt, but only if they have been licensed for less than a year.

The driver's seat of a bus should be equipped with a seat belt, which must always be used by the driver.

3 . If you’re unfamiliar with the area in which you must back up, you should:

Get out of your vehicle and walk around the area to become more familiar with it.

Not use both mirrors, as that can cause too much distraction.

Wait for someone else to back up in the area so you see how they do it.

Turn on your high beam headlights.

Backing is always dangerous because you cannot see everything behind your vehicle. Especially if you are unfamiliar with the area, you should get out of your vehicle and familiarize yourself with your path of travel before beginning to back up.

4 . A danger of a large truck swerving to avoid a hazard is:

The truck may miss the object.

The truck may flip over.

The truck may stay in the same lane.

Other vehicles may do the same thing.

Swerving out of the way of a hazard is sometimes safer than trying to stop before reaching the hazard. You can usually turn away from something more quickly than you can come to a complete stop. However, swerving while in a vehicle that is either top-heavy or pulling multiple trailers may result in a rollover.

5 . When approaching a railroad crossing, a driver should:

Rely only on automated signals.

Expect to hear a train.

Cross the tracks before an approaching train reaches the crossing.

Reduce their speed.

You should approach every railroad crossing with the expectation that a train is coming. Do not rely on signals or your hearing to reliably tell you if a train is present. Always slow down when approaching a crossing. Never try to race a train.

6 . Before a bus enters a curve, the driver should:

Increase their speed.

Stay at the same speed.

Reduce their speed.

Move onto the shoulder of the road.

Crashes on curves are usually a result of the operator driving too fast. A bus driver should always reduce their driving speed before entering a curve, turn, on-ramp, or off-ramp.

7 . When pulling back into traffic after making a stop, you should:

Assume other drivers will allow you to merge.

Wait for a gap in traffic that is large enough to allow you to accelerate and merge.

Allow a passenger to get out and direct traffic to allow you to merge.

Continually sound your horn until other drivers allow you to merge.

When driving a bus, be aware of how quickly it can accelerate and much space it takes up on the roadway. Always wait for a gap in traffic that is large enough to accommodate your vehicle before you leave a stop.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Wyoming | Frequently Asked Questions

A CDL Class A license in Wyoming is defined as a commercial driver's license that permits the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 lbs or more, provided the vehicle(s) being towed have a GVWR of more than 10,000 lbs. This includes tractor-trailers, truck and trailer combinations, and flatbeds.

A Class A CDL license allows the holder to operate a variety of vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. It also includes any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 lbs or more, if the towed vehicle(s) exceed 10,000 lbs GVWR.

To obtain a Class A CDL in Wyoming, you must be at least 18 years old (21 for interstate driving), possess a valid Wyoming driver's license, and pass a vision test. You'll also need to pass a written knowledge test, a skills test, and the Department of Transportation medical examination. Additionally, you must have a clean driving record and no disqualifying criminal offenses.

In Wyoming, you must be at least 18 years old to qualify for a Class A CDL license for intrastate driving (within Wyoming only). However, to drive a commercial vehicle across state lines (interstate driving), federal regulations require drivers to be at least 21 years old.

No, specific endorsements are not required for a Class A CDL license. However, depending on the type of vehicle you plan to drive or cargo you plan to carry, you may need to obtain additional endorsements. These can include T for Double/Triple Trailers, P for Passenger vehicles, N for Tank Vehicles, H for Hazardous Materials, and S for School Buses.

The Class A CDL skills test in Wyoming encompasses three main parts: the vehicle inspection test, the basic control skills test, and the road test. The vehicle inspection test assesses your knowledge of the vehicle and its parts. The basic control skills test measures your ability to control the vehicle, while the road test evaluates your on-road driving skills.

Yes, there are limitations imposed on Class A CDL license holders. The restrictions depend on the driver's abilities and the type of vehicle they tested in. For instance, if you take your test in an automatic vehicle, you'll get a restriction preventing you from driving a manual. Additionally, if you don't pass the air brakes test, there will be a restriction from driving vehicles with air brakes.

In Wyoming, the Class A CDL written test is typically administered in English. However, some locations may offer the test in Spanish. It's advisable to contact your local Department of Transportation or DMV office to inquire about language accommodations. Note that even if the test is taken in another language, English proficiency is required for road communication.

Yes, accommodations are available for individuals with disabilities taking the Class A CDL written test in Wyoming. You should contact your local DMV office in advance to discuss your needs and make arrangements. Accommodations may include extended time, a separate testing room or use of assistive technology, depending on the nature of the disability.

In Wyoming, if you fail the Class A CDL written test, you can retake it. However, you must wait until the next business day to do so. There may also be a retest fee. It's recommended to review the areas where you struggled before attempting the test again to increase your chances of passing.