FREE Air Brakes Endorsement Test Online | Wyoming 2024
Train for FREE online with our Wyoming CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WY Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
1 . How is the parking brake released?
By tapping the accelerator twice
In newer vehicles with air brakes, the parking brakes are controlled by a diamond-shaped yellow knob. Pull the knob out to activate the parking brakes and push it in to release them.
2 . What do the two systems of a dual air brake system share?
Both systems in a dual air brake systems share a single air compressor. If the air compressor is damaged, neither system will be able to operate properly.
3 . To ensure normal stopping power, drivers of vehicles equipped with a front brake limiting valve should:
Some older vehicles have front brake limiting valves with "normal" and "slippery" settings. Setting a brake limiting valve to "slippery" reduces the vehicle's stopping power, so a driver should make sure the valve is in its "normal" position. Front wheel braking has proven to be effective in all driving conditions.
4 . When the spring brakes are activated in a vehicle with air brakes, you should never:
Open the trailer doors.
In a vehicle with air brakes, never push the brake pedal down when the spring brakes are activated. The combined force of the springs and the pressure of the air brakes could damage the brakes.
5 . On newer vehicles, how do you put on the parking brake?
Pull up on the steering column.
On newer vehicles with air brakes, the parking brake is controlled by a yellow, diamond-shaped knob. The knob is pulled out to set the brakes, and pushed in to release them.
6 . Anti-Lock Braking Systems (ABS):
Are illegal in some states.
ABS is equipped in addition to a vehicle's normal braking system and it neither increases nor decreases the vehicle's braking capability. ABS activates during hard applications of the brake pedal in order to prevent wheels from locking up.
2024 Wyoming | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Wyoming, you must already possess a Commercial Driver's License (CDL). Then, you'll need to pass the Doubles/Triples endorsement knowledge test. This test covers topics like coupling and uncoupling, inspecting doubles and triples, and the proper procedures for pulling double/triple trailers. After passing the test, you'll receive the endorsement.
To obtain a CDL Doubles/Triples license, you must first have a Commercial Driver's License (CDL). You then need to pass the Doubles/Triples endorsement knowledge test, which covers topics such as coupling and uncoupling, inspecting doubles and triples, and the correct procedures for pulling double/triple trailers. After passing the test, you'll receive the endorsement.
While it's not explicitly required, having specialized experience or training for a CDL Doubles/Triples endorsement is beneficial. You must pass the endorsement knowledge test, which requires understanding the specifics of handling double/triple trailers. Training or experience can help in understanding these specifics. However, the most important thing is to study your state's CDL handbook and pass the test.
Yes, a specialized written knowledge test is required for the CDL Doubles/Triples endorsement. The test covers topics like coupling and uncoupling, inspecting doubles and triples, and following correct procedures for pulling double/triple trailers. Passing this test is mandatory to obtain the endorsement. However, a skills/driving test isn't required unless upgrading the CDL class.
The CDL Doubles/Triples endorsement test is a written knowledge test, not a skills or driving test. It will cover topics such as coupling and uncoupling trailers, inspecting doubles and triples, and the correct procedures for pulling double/triple trailers. You need to showcase your understanding of these topics rather than demonstrating physical maneuvers.
No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Wyoming, or anywhere in the U.S. This endorsement is required by federal law and demonstrates that the driver has the knowledge and skills necessary to safely operate these types of vehicles. Operating without it can result in penalties and fines.
You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test, and once passed, the endorsement will be added to your existing CDL. Check with your local DMV for specific procedures and fees.
Yes, there are constraints for drivers holding a CDL Doubles/Triples endorsement. For example, these drivers must adhere to weight restrictions and length limitations according to federal and state regulations. Drivers must also comply with hours of service rules, which dictate how many hours they can drive without taking a break. Violating these rules can result in fines or suspension of the license.
Federal regulations limit the gross vehicle weight to 80,000 pounds for vehicles with a CDL Doubles/Triples endorsement. The maximum length for each trailer in a double combination is 28.5 feet, while triple combinations are generally limited to 61 feet in total length. However, specific restrictions can vary by state, so it's important to check local regulations.
Yes, there are specific safety regulations. Drivers must ensure that all trailers are securely attached, and the weight is properly distributed. They must also perform pre-trip inspections, adhere to speed limits, and maintain safe following distances. Additionally, drivers must be trained to handle the high rollover risk associated with these vehicles and understand the proper procedures for coupling and uncoupling trailers.