FREE 2024 Mississippi CDL Practice Test for Passenger Endorsement Online
Train for FREE with our Mississippi CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MS DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
1 . To use the controlled braking method, you should:
Pump the brakes.
The method of controlled braking involves applying the brakes as hard as you can without locking the wheels. If you need to make large steering adjustments while using controlled braking, you should remove your foot from the brake pedal, steer, then reapply the brakes.
2 . When driving at highway speeds, you should watch the road about ____ ahead of your vehicle.
Stay aware of upcoming obstacles and hazards by consistently watching the road at least 12 to 15 seconds ahead of your vehicle. When traveling at highway speeds, this is equivalent to about a quarter of a mile.
3 . The parking brake should be:
Used to stop the vehicle in normal driving.
The parking brake should be applied every time you park your vehicle.
4 . When driving a vehicle equipped with an Anti-Lock Braking System (ABS), you should:
Brake with less force than you would in a vehicle not equipped with ABS.
When driving a tractor-trailer combination that is equipped with an Anti-Lock Braking System (ABS), you should brake in the same manner that you would if the vehicle was not equipped with ABS.
5 . A low air pressure warning signal should activate:
When tank pressure falls below 5 psi.
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
6 . When about to drive a vehicle with a dual brake system, a driver should:
Pump the pedal about 20 times to build pressure, then begin driving.
Before driving a vehicle with a dual air brake system, allow time for the compressor to build up pressure to at least 100 psi in both systems.
7 . Rollovers happen when:
Vehicles are too close to one another.
A rollover happens as a result of a driver changing lanes or turning too quickly.
Search the best driving school in your neighbourhood
2024 Mississippi | Frequently Asked Questions
To acquire a CDL Tank endorsement in Mississippi, you need to pass the Tank Vehicles endorsement test. This test covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. You can prepare for the test by studying the Mississippi Commercial Driver's License Manual. After passing the test, you pay a fee to add the endorsement to your CDL.
To obtain a CDL Tank license, you must have a valid Commercial Driver's License (CDL). You then need to pass the Tank Vehicle endorsement test, which covers knowledge on inspecting and driving tank vehicles and adhering to safety rules. Studying the Mississippi CDL Manual can help prepare for the test. After passing, pay the required fee to add the endorsement.
While specific training or experience isn't mandatory to obtain a CDL Tank endorsement in Mississippi, it's beneficial to familiarize yourself with the operation of tank vehicles. Studying the Mississippi Commercial Driver’s License Manual, particularly the section on tank vehicles, is essential. Passing the Tank Vehicles endorsement test is required to get the endorsement.
Yes, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle endorsement test. This written exam covers specific knowledge about tank vehicles, including inspecting and driving tank vehicles, and safe driving rules. The content of the test is based on the relevant sections of your state's CDL manual.
The written test for the CDL Tank endorsement covers various subjects related to tank vehicles. These include the need for special driving skills due to high center of gravity, inspecting tank vehicles, safe loading and unloading procedures, and understanding the behavior of liquids in motion. It also covers safety rules and regulations specific to tank vehicles.
The CDL Tank endorsement assessment primarily involves a written test, not a skills or maneuvers test. The written test examines knowledge of handling high center of gravity, inspecting tank vehicles, understanding the behavior of liquid surges, and loading/unloading procedures. However, the general CDL skills test includes maneuvers like backing, turning, and general vehicle control.
There aren't specific limitations for drivers with a CDL Tank endorsement, but they must comply with general CDL rules. This includes maintaining a clean driving record, not driving under the influence of alcohol or drugs, and following all traffic laws. Also, they must ensure the safe and proper operation of tank vehicles, including adhering to weight limits and safety regulations.
No, transporting liquid or gas materials in a tank truck requires a valid CDL with a Tank endorsement. It's a federal requirement to ensure the safety of the driver and the public. Without this endorsement, drivers are not legally permitted to transport liquid or gas materials in large quantities. Violating this rule can lead to serious penalties.
The CDL Tank endorsement can be added to your current Commercial Driver's License. You don't need a fresh application for a new license. However, you will need to pass the tank vehicle written test. Upon passing, the Tank endorsement will be added to your existing CDL. Always check with your local DMV office for state-specific procedures.
Yes, to transport hazardous materials with a CDL Tank endorsement, drivers must also obtain a Hazardous Materials (HazMat) endorsement. This requires passing a written test and a TSA background check. These regulations ensure the safe transport of hazardous materials and adherence to federal safety standards.
