Double #1

FREE Double Triple Test Online | Utah 2024

Train for FREE with our Utah CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL double triple license in 2021, practice as much as..

Train for FREE with our Utah CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL double triple license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.

20
16
20

1 . Dual tires should be in contact with each other.

When inspecting a vehicle's tires, you should ensure that dual tires do not come into contact with each other or with other parts of the vehicle.

2 . Which of the following is not an indicator of when to change gears?

There are two indicators that determine when you need to shift into a higher gear. One indicator is the engine speed (rpm). You should read your vehicle's manual to learn its rpm range and shift up when you reach the top of that range. The other indicator is road speed (mph). You should learn which speeds each gear can accommodate, then keep an eye on the speedometer and shift up as needed.

3 . What is a danger of rolling back when you start to accelerate?

You may lose your position in traffic. To avoid hitting someone or something behind you, it is important to ensure that your vehicle does not roll backwards when starting from a stop. If your vehicle has a manual transmission, partly engage the clutch before taking your foot off the brake.

4 . A fire extinguisher is a required piece of safety equipment.

When inspecting a vehicle, you should check for required emergency equipment, including at least one fire extinguisher.

5 . Noting the speed of other vehicles is one way to determine when to upshift.

There are two indicators that determine when you need to shift into a higher gear. One indicator is the engine speed (rpm). You should read your vehicle's manual to learn its rpm range and shift up when you reach the top of that range. The other indicator is road speed (mph). You should learn which speeds each gear can accommodate, then keep an eye on the speedometer and shift up as needed.

6 . A flare is required emergency equipment.

When inspecting a vehicle, you should check for required safety equipment. This includes warning devices for parked vehicles, fuses, and liquid burning flares.

7 . When going downhill, switching into a lower gear is an effective way to slow a vehicle.

On a steep downgrade, you must use the engine's braking effect as your primary method of speed control. Be sure to decelerate and downshift appropriately before beginning to drive down the hill.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Search the best driving school in your neighbourhood