Montana Driver's Examination

Passenger #2

FREE 2024 Montana CDL Practice Test for Passenger Endorsement Online

Train for FREE with our Montana CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When conducting a vehicle inspection, you will need to identify all of the following, except:

The power steering belt.

The water pump belt.

The alternator belt.

The water compressor belt.

During the vehicle inspection test, you must check the power steering belt, water pump belt, alternator belt, and air compressor belt for snugness, cracks, or frays. If any of these components are not belt-driven, you must tell the examiner which one(s), and verify that they are operating properly, mounted securely, and not damaged or leaking.

2 . When entering a curve, you should:

Get off the roadway.

Use the shoulder.

Downshift.

Take the vehicle out of gear.

Always reduce your speed and downshift before entering a curve.

3 . If you are unsure if there is enough space for your vehicle to safely pass under an upcoming bridge, you should:

Increase your speed.

Swerve as you pass under the bridge.

Slow down.

Drive on the shoulder.

If you are not confident that your vehicle will have enough room to safely pass under an overhead object, you should slow down and seek another route, if possible.

4 . Cargo inside a trailer:

Does not need to be secured.

Should be stacked no more than three feet high.

Should be secured to prevent movement.

Should be loaded with the heaviest items on top of lighter items.

Cargo needs to be secured appropriately to prevent it from moving in transit. Cargo should be arranged to keep the vehicle's center of gravity low and well-distributed.

5 . Why are roads especially slippery right after it begins to rain?

The water mixes with oil and grease on the road.

Roads are naturally slippery.

Gravel often gets washed to the middle of the lane.

Tires are not usually designed to drive in rain.

In rainy weather, roads are often at their most slippery when the rain first begins to fall. Fresh rainwater mixes with oil and grease on the road to form a slick film. As the rain continues, this mixture will eventually wash away.

6 . One way to prevent drowsiness while driving is to:

Drive alone.

Avoid regular exercise.

Get adequate sleep the night before the trip.

Driving while fatigued can be extremely dangerous. Strategies for preventing drowsiness while driving include getting a full night's sleep before a trip; having someone ride with you; scheduling trips for times during which you are normally awake; and avoiding medications that may cause drowsiness. Exercising regularly can increase your energy levels and make you less likely to become tired while driving.

7 . A CMV should:

Not have a fire extinguisher, unless transporting hazardous materials.

Not have a fire extinguisher, unless the vehicle will be traveling through remote areas.

Not have a fire extinguisher.

Have a fire extinguisher and other emergency equipment.

All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Montana | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Montana, you first need to have a Montana CDL. Then, you must pass the Hazardous Materials Endorsement Knowledge Test. You'll also need to undergo a TSA background check. Once you've passed the tests and background check, you can apply for the endorsement through the Montana Department of Motor Vehicles.

Before obtaining a CDL Hazmat endorsement, you must hold a valid Commercial Driver's License (CDL). You need to be at least 21 years old, have U.S. citizenship or lawful permanent residency, and be able to read and speak English. Additionally, you must pass a Hazardous Materials Endorsement Knowledge Test and a TSA background check.

When applying for a CDL Hazmat endorsement, you'll need to provide your current CDL, proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), and proof of identity. Additionally, you'll need to complete a Hazardous Materials Endorsement application and pass the TSA background check.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test covers various topics related to hazardous materials, including recognition and identification, communication rules, emergency response, and more. You must pass this test to obtain your Hazmat endorsement in Montana.

The written test for the CDL Hazmat endorsement covers a range of topics related to hazardous materials. These include identification of hazardous materials, loading and unloading procedures, use of placards and labels, emergency response procedures, and regulations pertaining to transport. It also covers safety precautions and the handling of discharge system and leaks.

Yes, there are additional costs associated with obtaining a CDL Hazmat endorsement. These include fees for the written test, TSA background check, and fingerprinting. The total cost can vary, but you can expect to pay between $80-$120. It's recommended to check with the Montana Motor Vehicle Division for the most current fees.

Yes, a background check and security clearance are necessary for the CDL Hazmat endorsement. This process, known as the Threat Assessment Program, is managed by the Transportation Security Administration (TSA). It involves checking criminal history, immigration status, and mental health status to ensure that hazardous materials are transported safely.

Yes, specialized training is required for the CDL Hazmat endorsement. You must pass a written test about transporting hazardous materials. Additionally, you must undergo a TSA background check. The training and certification ensure you understand how to safely transport hazardous materials, are aware of the risks involved, and know how to respond in case of emergencies.

No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Montana or anywhere in the U.S. This endorsement is required by federal law and ensures that drivers have the necessary skills and knowledge to safely handle and transport hazardous materials. Violating this law can result in severe penalties.

Yes, you can add the CDL Hazmat endorsement to your current CDL license. You do not need to apply for a new CDL. However, you must pass the Hazmat knowledge test, submit fingerprints, and undergo a TSA background check. Once these steps are completed and approved, the Hazmat endorsement will be added to your existing CDL.