Montana Driver's Examination

Knowledge Test Class B #2

FREE CDL Class B Driving Test Online | Montana 2024

Train for FREE online with our Montana class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class B permit in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . Why are roads especially slippery right after it begins to rain?

The water mixes with oil and grease on the road.

Roads are naturally slippery.

Gravel often gets washed to the middle of the lane.

Tires are not usually designed to drive in rain.

In rainy weather, roads are often at their most slippery when the rain first begins to fall. Fresh rainwater mixes with oil and grease on the road to form a slick film. As the rain continues, this mixture will eventually wash away.

2 . Which of the following is not acceptable emergency equipment?

Three red reflective triangles

Six fuses

Three liquid burning flares

Four yellow squares

During the vehicle inspection test, you will need to show emergency equipment, including spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and a properly charged and rated fire extinguisher.

3 . If exiting a bus, a driver must:

Never make contact with the handrail.

Maintain contact with the handrail.

Move quickly.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.

4 . Which of the following is acceptable if found during a pre-trip inspection?

Tires in mismatched sizes

Tread depth of 2/32 of an inch in the grooves of the front tires

Tires manufactured by different makers

Cracks in the tires

When inspecting your tires, verify that there is tread depth of at least 4/32 of an inch in every major groove on the front tires and tread depth of at least 2/32 of an inch in grooves on the other tires. Be sure that your tires are not too worn, are not cracked, have proper air pressure, and are all equally sized.

5 . If convicted of a traffic violation in your personal car:

You must tell your employer.

Your CDL will not be affected.

Law enforcement will tell your employer.

If you are convicted of any traffic violations while driving any vehicle, you must notify your employer within 30 days of the conviction. This rule excludes parking violations.

6 . When asked about the vehicle's oil during the vehicle inspection test, you must be able to do all of the following, except:

Indicate where the dipstick is located.

Show that the oil level is within a safe operating range.

Show that the oil level is above the refill mark.

Show that the oil level is below the refill mark.

During the vehicle inspection test, you must be able to indicate where the oil dipstick is located; show that the oil level is within a safe operating range; and show that the oil level is above the refill mark.

7 . Before beginning downhill, you should:

Shift into a higher gear.

Take your vehicle out of gear.

Shift into a lower gear.

Rely only on braking to reduce your speed.

On a steep downgrade, you must use the engine's braking effect as your primary method of speed control. Be sure to decelerate and downshift appropriately before beginning to drive down the hill. Relying too heavily on the brakes may cause them to overheat and fade, becoming less effective.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your MT DMV Written Test Get Your MT DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.45 out of 5 based on 31 votes

2024 Montana | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Montana, you first need to have a Montana CDL. Then, you must pass the Hazardous Materials Endorsement Knowledge Test. You'll also need to undergo a TSA background check. Once you've passed the tests and background check, you can apply for the endorsement through the Montana Department of Motor Vehicles.

Before obtaining a CDL Hazmat endorsement, you must hold a valid Commercial Driver's License (CDL). You need to be at least 21 years old, have U.S. citizenship or lawful permanent residency, and be able to read and speak English. Additionally, you must pass a Hazardous Materials Endorsement Knowledge Test and a TSA background check.

When applying for a CDL Hazmat endorsement, you'll need to provide your current CDL, proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), and proof of identity. Additionally, you'll need to complete a Hazardous Materials Endorsement application and pass the TSA background check.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test covers various topics related to hazardous materials, including recognition and identification, communication rules, emergency response, and more. You must pass this test to obtain your Hazmat endorsement in Montana.

The written test for the CDL Hazmat endorsement covers a range of topics related to hazardous materials. These include identification of hazardous materials, loading and unloading procedures, use of placards and labels, emergency response procedures, and regulations pertaining to transport. It also covers safety precautions and the handling of discharge system and leaks.

Yes, there are additional costs associated with obtaining a CDL Hazmat endorsement. These include fees for the written test, TSA background check, and fingerprinting. The total cost can vary, but you can expect to pay between $80-$120. It's recommended to check with the Montana Motor Vehicle Division for the most current fees.

Yes, a background check and security clearance are necessary for the CDL Hazmat endorsement. This process, known as the Threat Assessment Program, is managed by the Transportation Security Administration (TSA). It involves checking criminal history, immigration status, and mental health status to ensure that hazardous materials are transported safely.

Yes, specialized training is required for the CDL Hazmat endorsement. You must pass a written test about transporting hazardous materials. Additionally, you must undergo a TSA background check. The training and certification ensure you understand how to safely transport hazardous materials, are aware of the risks involved, and know how to respond in case of emergencies.

No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Montana or anywhere in the U.S. This endorsement is required by federal law and ensures that drivers have the necessary skills and knowledge to safely handle and transport hazardous materials. Violating this law can result in severe penalties.

Yes, you can add the CDL Hazmat endorsement to your current CDL license. You do not need to apply for a new CDL. However, you must pass the Hazmat knowledge test, submit fingerprints, and undergo a TSA background check. Once these steps are completed and approved, the Hazmat endorsement will be added to your existing CDL.