FREE CDL Class A Driving Test Online Washington 2024 Page 2 of 7
Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
The following 50 multiple-choice questions will test your understanding of safe CDL driving procedures, including braking, backing, distracted driving, unique road conditions, railroad crossings, and much more. Each question is based on the Washington Commercial Driver Guide as well as pertinent state and federal statutes in Washington. Good luck on your practice exam, since a passing grade will get you closer to passing your real CDL exam. Drive carefully!
Ideal for:
- CDL holders who want to add endorsements to their license
- First-time WA CDL and CLP applicants
- Applicants for CDL renewal in WA
On the actual WA CDL exam:
- There are 50 questions
- To pass, you must get 40 right answers
- 80% passing score
50
40
20
8 . In a dual air brake system, if one air system is very low on pressure:
In a dual air brake system, either the front or rear brakes will not be fully operable if one of the air systems gets too low on pressure. If the air pressure in either tank gets too low while you are driving, you should exit the road and park as soon as possible.
9 . If approaching a railroad crossing that is being approached by a train, you should:
Never attempt to beat a train to a railroad crossing. It is very difficult to accurately judge the speed of an approaching train. If you come upon a crossing that is being approached by a train, you must stop and wait for the train to pass before you attempt to cross the tracks.
10 . When driving a 50-foot truck at 50 mph, your minimum following distance should be:
At speeds below 40 mph, you should allow at least one second of following distance for every 10 feet of your vehicle. When traveling at higher speeds, follow the same formula, then add one additional second to your following distance.
11 . If your wheels being to spin when accelerating on a poor traction surface, you should:
If your drive wheels begin to spin while accelerating on a surface with poor traction, you should remove your foot from the accelerator.
12 . When transporting a load, the cargo should be inspected:
Cargo and its securing devices must be inspected before starting a trip. After beginning a trip, the driver should check the load and securing devices within the first 50 miles on the road, every three hours or 150 miles traveled, and after every break.
13 . Which of the following vehicles is not exempted in requiring the driver to hold a CDL?
Subject to certain conditions, a CDL is not required to operate military vehicles, authorized emergency vehicles, farm equipment, or recreational vehicles. It is also not required for operating a straight truck that contains only your personal property that you are not selling.
14 . What is reaction distance?
Your vehicle's stopping distance can be calculated by adding together your perception distance, your reaction distance, and your vehicle's braking distance. Reaction distance is the distance traveled between the moment you mentally perceive a hazard and the moment you physically hit the brakes.
2024 Washington | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Washington, you must first possess a valid CDL. Then, you should study the Doubles and Triples section of the Washington CDL Handbook. After studying, schedule and pass the written knowledge test at a Washington Department of Licensing office. Lastly, pay the required endorsement fee to add it to your license.
To obtain a CDL Doubles/Triples license, you must first have a basic CDL. You will then need to study for and pass the Doubles/Triples endorsement test, which covers specific knowledge related to driving these types of vehicles. This includes understanding the handling and safety procedures. Finally, you'll pay any required fees for the additional endorsement on your license.
While formal experience isn't required for a CDL Doubles/Triples endorsement, you must possess a valid Commercial Driver's License (CDL). It's recommended to study the CDL manual and take practice tests. Understanding coupling/uncoupling, inspecting doubles/triples, and checking air brakes is essential. Passing the Doubles/Triples endorsement knowledge test is the final step.
Yes, to obtain a CDL Doubles/Triples endorsement, you must pass the Doubles/Triples endorsement knowledge test. This test covers topics like coupling and uncoupling, inspecting doubles and triples, and checking air brakes. There is no additional driving skills test required beyond the standard CDL exam.
The CDL Doubles/Triples endorsement test primarily focuses on knowledge rather than specific driving maneuvers. You'll need to understand coupling and uncoupling, inspecting doubles and triples, and managing the high risk of rollover. Additionally, you'll need to know about pulling double/triple trailers, as well as the implications of crashes. The test is written, not practical, so no driving skills are showcased.
No, it is not permissible. In Washington, like in all states, a valid CDL Doubles/Triples endorsement is required to legally operate double or triple trailers. Driving these vehicles without the necessary endorsement can lead to serious penalties including fines and suspension of your commercial driving license.
You can append the Doubles/Triples endorsement to your existing CDL. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test. Once you pass, the endorsement is added to your CDL, allowing you to legally operate double and triple trailers.
Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. They can only operate double or triple trailers. Also, these drivers must comply with all federal and state regulations regarding commercial vehicle operation, including weight limits, logbook rules, and safety inspections. Any violation can lead to penalties or revocation of the endorsement.
In Washington State, double trailers can't exceed a combined length of 61 feet and triple trailers can't exceed 75 feet. As for weight, the maximum gross vehicle weight (including all axles) is 105,500 pounds. However, individual axle weights can't exceed limits set by federal bridge laws. Always check specific state and federal regulations.
Yes, there are specific safety guidelines and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement in Washington. These include maintaining proper spacing between trailers, using proper turning techniques, and adhering to weight restrictions. It is important to follow these guidelines to ensure the safe operation of double/triple trailers on the road.