FREE CDL Combination Vehicles Practice Test Online | Washington 2024 Page 3 of 3
Train for FREE online with our Washington CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA combination license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
15 . In a vehicle equipped with an automatic tractor protection valve, the valve will pop out when air pressure drops to a level between:
In vehicles equipped with an automatic tractor protection valve, the valve will pop out if air pressure drops to a level between 20 and 45 psi. When the valve pops out, the protection valve will close, stopping the flow of air.
16 . After completing a pre-trip inspection, you should ensure that the:
Before a trip, you should ensure that air reaches all air brakes on all trailers by opening up the rear emergency line and service line shut-off valves and listening for escaping air. Close both shut-off valves before beginning to drive.
17 . In a double or triple combination, the ____ trailer should be directly behind the cab.
When positioning trailers in a combination, the most heavily-loaded trailer should be the closest to the tractor. The lightest trailer should be positioned in the rear.
18 . A trailer that is too high:
Before coupling together a tractor and a trailer, you should make sure the trailer is at the proper height. If the trailer is too low, the trailer nose may be damaged. If the trailer is too high, it may not be able to couple correctly.
19 . If the emergency air line loses pressure:
The tractor protection valve keeps air in the trailer's braking system should the trailer break away or develop a leak. A loss of air pressure in the emergency line will cause the tractor protection valve to open and the emergency trailer brakes to activate.
20 . The best way to recognize that your trailer has started to skid is by:
The easiest way to become aware that your trailer has begun to jackknife is to observe it in your mirrors. Checking your trailer in your mirrors will also allow you to spot any skidding at the earliest possible moment.
Search the best driving school in your neighbourhood
2024 Washington | Frequently Asked Questions
A CDL Class B license in Washington allows the holder to operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 or more pounds, or any such vehicle towing another not exceeding 10,000 pounds. This typically includes buses, dump trucks, tow trucks, delivery trucks, and straight trucks.
A Class B CDL license allows you to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a vehicle of this size towing another not exceeding 10,000 pounds. You can drive buses, dump trucks, tow trucks, delivery trucks, garbage trucks, and straight trucks with this license.
To acquire a Class B CDL license in Washington, applicants must be at least 18 years old (21 if intending to drive interstate), possess a valid Washington state driver's license, pass a vision test, and successfully complete both a knowledge test and skills test. They also must provide proof of U.S. citizenship or lawful permanent residency.
In Washington, you must be at least 18 years old to qualify for a Class B CDL license. However, please note that you must be 21 years old or older if you intend to drive commercial vehicles across state lines (interstate driving).
Specific endorsements aren't necessary for a Class B CDL license, but they can broaden your driving opportunities. Endorsements like H (Hazardous Materials), N (Tank Vehicles), P (Passenger Transport), and S (School Bus) require additional knowledge tests. The T endorsement for double/triple trailers isn't applicable to Class B.
The Class B CDL skills assessment in Washington includes three parts: pre-trip inspection, basic vehicle control, and on-road driving. You'll need to demonstrate knowledge of your vehicle's components, show you can control your vehicle in various situations, and prove you can safely drive in normal traffic conditions.
Yes, Class B CDL license holders in Washington are limited to driving vehicles under 26,001 pounds or towing vehicles that do not exceed 10,000 pounds. They can't operate Class A vehicles unless they upgrade their license. Also, they can't drive vehicles requiring special endorsements unless they pass additional tests.
Yes, in Washington, the written Class B CDL test is available in multiple languages. However, federal regulations require all commercial drivers to read and speak English well enough to converse with the general public, understand traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, in Washington, if you have a disability that requires special accommodations for the Class B CDL written exam, you can request them. Accommodations may include Braille or large print exams, oral exams, or extra time. Be sure to make your request well in advance to allow for arrangements.
Yes, if you don't pass the Class B CDL written test in Washington, you can retake it. However, you must wait at least three days before attempting the test again. You'll need to pay a retesting fee each time. Remember to study thoroughly before retaking to increase your chances of passing.
