FREE Air Brakes Endorsement Test Online | Montana 2024 Page 2 of 4
Train for FREE online with our Montana CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
7 . Truck tractors with air brakes built on or after March 1, 1997 must have:
Truck tractors with air brakes built on or after March 1, 1997, and other vehicles with air brakes built on or after March 1, 1998, must be equipped with anti-lock brakes.
8 . Brake fading is caused when:
Brakes are wet.
Using the brakes excessively will cause them to overheat, making them less effective. This is referred to as "fading."
9 . The ____ between an air compressor and reservoir tank prevents air from escaping if the air compressor has a leak.
A one-way check valve is required to be between an air compressor and the first main reservoir. This valve prevents air from escaping the system if the air compressor develops a leak.
10 . What does an air compressor do in an air brake system?
In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.
11 . In a dual air brake system, if one air system is very low on pressure:
In a dual air brake system, either the front or rear brakes will not be fully operable if one of the air systems gets too low on pressure. If the air pressure in either tank gets too low while you are driving, you should exit the road and park as soon as possible.
12 . What tells you how much pressure is in your vehicle's air tanks?
A vehicle that is equipped with air brakes must also be equipped with a supply pressure gauge. This gauge tells the driver how much air pressure is in each of the vehicle's air tanks.
See the exact questions that will be on the 2024 Montana DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Montana | Frequently Asked Questions
In Montana, to secure a CDL Doubles/Triples endorsement, you must first hold a valid Commercial Driver's License (CDL). Then, you need to pass the Doubles/Triples Knowledge written test. After passing the test, pay the necessary fees at your local Montana Motor Vehicle Division office to have the endorsement added to your CDL.
To obtain a CDL Doubles/Triples endorsement, you must hold a valid Commercial Driver's License (CDL). You will then need to pass the Doubles/Triples Knowledge written test. Some states may require additional training or experience. Check with your local Department of Motor Vehicles for specific requirements in your state.
While you must have a valid Commercial Driver's License (CDL) to get a Doubles/Triples endorsement, Montana doesn't explicitly require specialized training or experience. However, it's recommended to undergo training for safety and proficiency. Keep in mind, you must pass the Doubles/Triples Knowledge Test to get the endorsement.
Yes, in Montana, to obtain a CDL Doubles/Triples endorsement, you are required to pass a specialized knowledge test. This test is designed to assess your understanding of safety protocols, operational procedures, and regulations associated with driving double and triple trailers. It's separate from the general CDL written exam.
The CDL Doubles/Triples endorsement test in Montana is a written knowledge test, not a skills test. It focuses on specific rules and safety guidelines related to hauling double and triple trailers. Topics include coupling and uncoupling, inspecting doubles and triples, and handling these large vehicles on the road. Practical skills or maneuvers are not directly tested for this endorsement.
No, it is not permissible. In Montana, as in all U.S. states, you must have a valid CDL with a Doubles/Triples endorsement to legally operate double or triple trailers. Driving such vehicles without the appropriate license and endorsement can result in hefty fines, license suspension, and potential legal consequences.
Yes, you can add the Doubles/Triples endorsement to your current CDL. You don't need to initiate a new license application. However, you will need to pass the Doubles/Triples endorsement knowledge test, and pay an additional fee. Once you pass, the endorsement will be added to your existing CDL.
Yes, there are limitations. A CDL Doubles/Triples endorsement allows you to operate vehicles with more than one trailer, but it doesn't permit you to drive all types of commercial vehicles. For instance, you would need additional endorsements to drive a school bus or a vehicle carrying hazardous materials. Furthermore, all CDL rules regarding medical fitness, hours of service, etc., still apply.
In Montana, the maximum weight for a vehicle (or combination) with a load is 131,060 pounds. The maximum length for a single trailer is 53 feet, and for double/triple trailers, the combined length should not exceed 75 feet. However, these limits can be subject to exceptions based on specific routes or permit conditions. Always check local regulations.
Yes, there are specific safety guidelines. Drivers must ensure the coupling devices are secure, maintain a safe following distance, and avoid sudden lane changes or hard braking. Also, they must be aware of the "crack-the-whip" effect, which can cause the last trailer to overturn at high speeds or sharp turns. Regular vehicle inspections and adhering to federal and state regulations are also required.
