FREE Idaho CDL Practice Test 2024 - DMV Practice Test Page 2 of 7
Idaho is known for its diverse livestock and fresh vegetables, making commercial drivers like you an important component of the state's success. You'll prepare today with 50 multiple-choice questions based on the Idaho Commercial Driver's License Manual, covering everything from shifting to dealing with black ice on the road, in order to pass the state's written CDL exam. Pay special attention to the explanations that accompany each question; these explanations will help you better comprehend the handbook and obtain right answers on your CDL written exam.
50
40
20
8 . To prevent your vehicle from rolling backward when beginning to move, you can:
To ensure that your vehicle does not roll backward when beginning to move after a stop, you should partly engage the clutch before removing your right foot from the brake pedal.
9 . When making tight maneuvers, it is important for a driver to:
While regular mirror checks should always be part of your driving routine, you should make a particular point of checking the mirrors when changing lanes, turning, merging, or making tight maneuvers.
10 . When loading a trailer, you should:
A load of cargo must be properly balanced. Placing too much weight over an axle can damage the axle and make it more difficult for you to steer. Placing too little weight over an axle can cause poor traction, also leading to difficult handling.
11 . Mirrors should be checked:
Always check for traffic in your mirrors before changing lanes. Frequent mirror checks should be a part of your normal scanning routine.
12 . One way to avoid becoming an aggressive driver is to:
To help avoid frustration, which can lead to aggressive driving behavior, you should begin a trip with realistic expectations about your travel time. Plan ahead to allow time for potential traffic delays. Other strategies to help prevent aggressive driving behavior include driving an appropriate speed and keeping a reasonable following distance; avoiding making gestures at other drivers; and keeping your hands on the steering wheel.
13 . Wheel rims that have been welded should:
Wheels or rims that have had welding repairs are not safe to be used.
14 . Be sure that your wheel bearing/seals are:
During an inspection, ensure that the wheel bearing/seals are not leaking.
2024 Idaho | Frequently Asked Questions
A CDL Class A license in Idaho is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle is heavier than 10,000 pounds. It typically covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Idaho allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more if the towed vehicle exceeds 10,000 pounds.
To obtain a Class A CDL license in Idaho, you must be at least 18 years old (21 for interstate driving), possess a valid Idaho non-commercial license, pass a vision test, and successfully complete knowledge and skills tests. You also need to provide proof of age, identity, residency, and social security number. Medical requirements must be met too.
In Idaho, you must be at least 18 years old to qualify for a Class A CDL license for intrastate driving (within Idaho). However, you must be at least 21 years old to drive a commercial vehicle across state lines, carry hazardous materials, or transport interstate freight within the state.
While specific endorsements are not required for a Class A CDL license, they can provide additional permissions. Endorsements include H for hazardous materials, N for tank vehicles, P for passenger vehicles, S for school buses, T for double/triple trailers. Each endorsement requires passing additional knowledge and skills tests.
The Class A CDL skills test in Idaho encompasses three main parts: a pre-trip inspection, a basic vehicle control test, and an on-road driving test. The pre-trip inspection assesses your ability to inspect your vehicle before driving. The basic control test evaluates your ability to maneuver and control the vehicle. The on-road test examines your on-road driving skills.
Yes, there are limitations. Class A CDL license holders in Idaho are not allowed to operate a vehicle with a Gross Vehicle Weight Rating (GVWR) of more than 26,001 pounds, or tow a vehicle heavier than 10,000 pounds unless they have the appropriate endorsements. They also cannot transport hazardous materials without an H endorsement or operate a passenger vehicle without a P endorsement.
In Idaho, the written Class A Commercial Driver's License (CDL) test is typically administered in English. However, some locations may offer the test in Spanish. It is important to note that all CDL holders must be able to read and speak English well enough to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class A CDL written test in Idaho if you have a disability. The Idaho Transportation Department complies with the Americans with Disabilities Act (ADA) and provides reasonable accommodations for applicants with disabilities. However, you must still meet the essential eligibility requirements for obtaining a CDL.
If you fail the Class A CDL written test in Idaho, you'll be allowed to retake the test. However, you have to wait at least three days before you can retake it. If you fail three times, you must wait 30 days before retesting. There's no limit to the number of times you can retake the test, but each attempt requires a new fee.