Washington Driver's Examination

Knowledge Test Class B #2

FREE CDL Class B Driving Test Online | Washington 2024

Train for FREE online with our Washington class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class B permit in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . On a slippery road, a driver should:

Make turns as quickly as possible.

Refrain from passing slower vehicles.

Stop quickly.

Under slippery conditions, you should drive slowly and smoothly. Make turns as gently as possible and do not pass other vehicles unless you have to.

2 . When inspecting the windshield before a trip, a person should do all the following, except:

Remove and sharpen the wiper blades.

Check the windshield wipers for proper spring tension.

Check the wiper blades for damage.

When inspecting your windshield, you should look for cracks or other problems that could interfere with your ability to clearly see the road. The windshield wiper arms should be checked for proper spring tension. The wiper blades should be checked for damage, stiff rubber, and improper securement.

3 . If an aggressive driver is involved in a crash down the road, you should:

Pull over and yell at them.

Stop after the crash scene and report the other driver’s behavior to police.

Block the driver in with your vehicle.

If you observe a crash involving an aggressive driver, you should stop a safe distance from the crash scene, wait for police to arrive, and inform them of the aggressive behavior you witnessed.

4 . One way to prevent drowsiness while driving is to:

Drive alone.

Avoid regular exercise.

Get adequate sleep the night before the trip.

Driving while fatigued can be extremely dangerous. Strategies for preventing drowsiness while driving include getting a full night's sleep before a trip; having someone ride with you; scheduling trips for times during which you are normally awake; and avoiding medications that may cause drowsiness. Exercising regularly can increase your energy levels and make you less likely to become tired while driving.

5 . Brakes can get out of adjustment quickly, especially:

If they are hot.

In the winter time.

If they are used frequently.

Brakes are particularly prone to getting out of adjustment if they are hot. Be sure to routinely check the adjustment of your brakes. For a vehicle to be safely controlled, all brakes must be properly functioning and adjusted.

6 . Cargo should be covered:

To protect people from spillage.

To hide the materials.

To make it more difficult to steal.

You should cover your cargo to protect people from the cargo if it spills, as well as to protect the cargo from the weather.

7 . When leaving your vehicle unattended:

The parking brake should be used.

The parking brake only needs to be used if the vehicle is parked on a slope.

The parking brake should not be used, as it can damage the tires.

In general, you should always use the parking brake when parking your vehicle. However, you should not apply the parking brake if your brakes are very hot or if your brakes are wet and temperatures are below freezing.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your WA DMV Written Test Get Your WA DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.51 out of 5 based on 175 votes

2024 Washington | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Washington, you must have a valid CDL. Next, pass the Hazardous Materials Endorsement Knowledge Test at a Washington State driver licensing office. Then, undergo a federal background check and fingerprinting at an approved location. Finally, after receiving clearance, visit a driver licensing office to add the endorsement to your CDL.

To obtain a CDL Hazmat license, you must first have a valid Commercial Driver's License (CDL). You also need to pass the Hazardous Materials Endorsement Knowledge Test. A federal background check and fingerprinting are also required. Additionally, you must be at least 21 years old and a U.S. citizen or have legal status in the U.S.

When applying for a CDL Hazmat endorsement, you'll need your current Commercial Driver's License (CDL), proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), and a completed Medical Examination Report Form. Also, you'll need proof of your Social Security number and a completed Hazardous Materials Endorsement application.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. This is known as the Hazardous Materials Endorsement Knowledge Test. It covers topics like loading and unloading hazardous materials, bulk packaging marking, driving and parking rules, and emergency response procedures. You must pass this test to get the Hazmat endorsement.

The Hazardous Materials Endorsement Knowledge Test for the CDL Hazmat endorsement covers a range of subjects including identification of hazardous materials, proper loading and unloading procedures, safety procedures in transport, emergency response procedures, and understanding of the Hazardous Materials Regulations. It also tests knowledge of placarding and marking requirements.

Yes, there are extra charges associated with obtaining a CDL Hazmat endorsement. These include fees for the written test, fingerprinting, and a background check. The exact costs can vary by state and the specific services used for fingerprinting and background checks. It's best to check with your local DMV for the most accurate information.

Yes, obtaining a CDL Hazmat endorsement does require a background check and security clearance. The Transportation Security Administration (TSA) conducts these checks to ensure that the applicant does not pose a security threat. The process includes fingerprinting, a review of criminal history, and immigration status check for non-U.S. citizens.

Yes, specialized training is mandatory for the CDL Hazmat endorsement. Applicants must pass the Hazardous Materials Endorsement Knowledge Test. Additionally, they must undergo a TSA background check. While not a formal "certification," these steps are necessary to ensure the driver understands how to safely handle hazardous materials.

No, you cannot legally transport hazardous materials without a valid Commercial Driver's License (CDL) with a Hazardous Materials (Hazmat) endorsement. This endorsement ensures that drivers have the necessary training and knowledge to handle hazardous materials safely and in compliance with the law. Violating this can result in hefty fines and penalties.

You can add the CDL Hazmat endorsement to your current CDL license. It doesn't require a new application for a CDL license. However, you will need to fill out a separate application for the endorsement, pass the Hazmat knowledge test, and complete a TSA background check before the endorsement is added to your existing CDL.