FREE Air Brakes Endorsement Test Online | Arizona 2024 Page 2 of 4
Train for FREE online with our Arizona CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AZ Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
7 . Which of the following is not part of a vehicle’s air brake system?
Components of an air brake system include an air compressor, an air compressor governor, air storage tanks, air tank drains, an alcohol evaporator, a safety valve, a brake pedal, foundation brakes, supply pressure gauges, an application pressure gauge, a low air pressure warning signal, a stop light switch, a front brake limiting valve (on some older vehicles), spring brakes, and parking brake controls.
8 . How much distance will an air brake-equipped vehicle need to come to a complete stop if it is traveling at 55 mph under ideal driving conditions?
A vehicle's total stopping distance is made up of perception distance, reaction distance, brake lag distance, and braking distance. With all of these factors included, an air brake-equipped vehicle traveling at a speed of 55 mph under ideal driving conditions will need approximately 450 feet to come to a complete stop.
9 . The air storage tanks:
The air storage tanks in an air brake system store compressed air to be used for braking. They hold enough air for the brakes to still be used several times if the compressor stops working.
10 . On flat surfaces, wheel chocks:
In situations where a driver cannot use a parking brake, wheel chocks can be used to hold a parked vehicle in place on a level surface.
11 . What is often found in compressed air?
Compressed air in an air brake system usually contains a certain amount of water and compressor oil. The water and oil can damage the brakes if left to accumulate in the system. Tanks must be drained regularly to remove this build-up.
12 . If air pressure drops to a level between ____, a visual low pressure warning signal should have already activated.
A visual low pressure warning signal should activate before air pressure drops to a level between 55 and 75 psi. This signal could be a light, a buzzer, or a wig wag.
2024 Arizona | Frequently Asked Questions
To acquire a CDL Tank endorsement in Arizona, you must first have a Commercial Driver's License (CDL). Then, study the Arizona Commercial Driver License Manual’s tank vehicle section. After that, schedule and pass the Tank Vehicle endorsement written test at an Arizona Motor Vehicle Division (MVD) office. The endorsement will be added to your CDL upon passing the test.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). Then, you need to study the tank vehicle section of the Commercial Driver License Manual. Once you're prepared, schedule and pass the Tank Vehicle endorsement written test at your local Motor Vehicle Division (MVD) office. The endorsement is added to your CDL upon passing.
While specific training or experience is not legally mandatory for a CDL Tank endorsement in Arizona, it's highly recommended to understand the unique handling characteristics and safety concerns of tank vehicles. Studying the tank vehicle section of the Arizona Commercial Driver License Manual thoroughly is crucial. Practical experience or training can significantly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement in Arizona, you must pass an additional written test that focuses on the knowledge required to safely operate a tank vehicle. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and understanding the effects of surge and liquid movement on vehicle stability.
The written test for the CDL Tank endorsement in Arizona includes subjects such as tank vehicle inspection, safe driving techniques, loading and unloading procedures, and emergency response. Additionally, it covers topics like identifying hazardous materials, understanding weight distribution, and proper placarding requirements.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its effects, handling stability and surge, safe driving rules, emergency procedures, and understanding the operation of special purpose tanks.
Yes, drivers with a CDL Tank endorsement must comply with federal and state regulation regarding load limits, vehicle inspections, and hours of service. They also must handle hazardous materials appropriately if they have a Hazardous Materials (HazMat) endorsement. Additionally, they cannot operate a tank vehicle under the influence of alcohol or drugs.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials. This requirement is strictly enforced under federal and state laws. Driving without the proper endorsement can lead to fines, license suspension, and even imprisonment. It's essential to obtain the correct endorsements for the specific type of cargo you'll be transporting.
The CDL Tank endorsement can be added to an existing Commercial Driver's License. You don't need a fresh application. However, you'll have to pass a knowledge test specific to tank vehicles. Once you pass the test, the endorsement will be added to your CDL, allowing you to transport liquid or gas materials legally.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional training and certification. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Additionally, they must follow specific safety protocols when loading, unloading, and transporting these materials to prevent accidents and spills.