Kentucky Driver's Examination

Bus #2

FREE Online Bus Driver Testing | Kentucky 2024

Train for FREE online with our KY bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Kentucky in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . An inside rearview mirror is used to:

Monitor passengers.

Inspect the outside of the bus.

See vehicles trying to switch lanes.

On a school bus, the overhead inside rearview mirror is used to monitor passenger activity inside the bus. It should be adjusted to show every student on the bus, including the students directly behind the driver.

2 . When exiting a vehicle, a driver should:

Hop directly from their seat to the ground.

Maintain at least one point of contact with their vehicle.

Be turned to face their vehicle.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.

3 . Pre-trip inspections should be done:

Differently each time in order to place emphasis on different items.

The same way each time to prevent you from forgetting anything.

Once in a while.

A pre-trip inspection should be completed in the same way before every drive. Consistency will help you learn all of the proper steps and decrease the likelihood that you will forget to check something.

4 . When asked to make a lane change during the driving test, you should:

Make the change as soon as the examiner asks, without looking.

Use your turn signal and change lanes when safe.

Make the lane change as quickly as possible, even if that means cutting off another driver.

You will be asked to change lanes during the on-road driving test. When the examiner asks you to do this, you should make the necessary traffic checks and use the proper signals before changing lanes.

5 . The overhead inside rearview mirror should be positioned to show:

The rear tires.

All of the students on the bus.

The floor of the bus.

The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

6 . A passive railroad crossing:

Has a control device.

Does not have any control devices.

Should be avoided.

Railroad crossings that do not display any traffic control devices are known as passive crossings. The decision to proceed across tracks at a passive crossing is entirely up to the driver.

7 . When boarding a school bus, students should:

Be in a single-file line.

Be in pairs.

Not use the handrail.

Students should board a school bus slowly and in a single-file line. For safety, boarding students should use the handrail.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Kentucky | Frequently Asked Questions

To get a CDL Hazmat endorsement in Kentucky, you must first have a valid Commercial Driver's License (CDL). Then, pass the Hazardous Materials Endorsement Knowledge Test. After passing, you'll need to complete a federal security threat assessment application through the Transportation Security Administration (TSA), including fingerprinting and a background check. Once cleared, your Hazmat endorsement will be added to your CDL.

To obtain a CDL Hazmat license, you must first have a valid Commercial Driver's License (CDL). You must pass the Hazardous Materials Endorsement Knowledge Test. Additionally, you must complete a federal security threat assessment application through the Transportation Security Administration (TSA), which includes fingerprinting and a background check. You must also be at least 21 years old.

When applying for a CDL Hazmat endorsement, you'll need to provide proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), a valid CDL, and proof of state residency. You will also need to complete the Hazardous Materials Endorsement application and pass the TSA's security threat assessment, which includes fingerprinting and a background check.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test is known as the Hazardous Materials Endorsement Knowledge Test. It covers topics such as how to recognize hazardous materials, how to safely load and unload such materials, and what to do in case of an emergency situation.

The CDL Hazmat endorsement written test covers a range of topics related to hazardous materials. These include identifying different types of hazardous materials, understanding Hazmat placards and labels, packing and loading procedures, emergency response, and safety regulations. It also tests knowledge on transporting specific types of hazardous materials. Studying the Hazmat section in the CDL Manual is crucial for preparation.

Yes, there are extra charges associated with acquiring a CDL Hazmat endorsement in Kentucky. In addition to the standard CDL licensing fees, applicants must pay for a federal background check and fingerprinting. The exact amount may vary, so it's recommended to check the current fees with the Kentucky Transportation Cabinet or the agency administering the endorsement.

Yes, background checks and security clearances are mandatory for the CDL Hazmat endorsement. This is to ensure that drivers are responsible and trustworthy to handle hazardous materials. The Transportation Security Administration (TSA) conducts a federal background check, which includes checking criminal, immigration, and FBI records.

Yes, specialized training is required for the CDL Hazmat endorsement. You'll need to pass the Hazardous Materials Endorsement Knowledge Test. Additionally, certification involves a federal security threat assessment and fingerprinting for a background check. The process ensures drivers are equipped with the necessary knowledge and are safe to transport hazardous materials.

No, you cannot transport hazardous materials without a valid CDL Hazmat endorsement. In Kentucky, like in all other states, federal law mandates that drivers transporting hazardous materials must hold a CDL with a Hazmat endorsement. Driving without this endorsement can lead to serious penalties including fines and disqualification.

Yes, you can add the CDL Hazmat endorsement to your current CDL license. You don't need to apply for a new CDL. However, you must pass the Hazmat knowledge test, provide proof of U.S. citizenship or lawful permanent residency, and pass a TSA background check to add the endorsement.