Idaho Driver's Examination

Bus #1

FREE Online Bus Driver Testing | Idaho 2024

Train for FREE online with our ID bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Idaho in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When loading a trailer, you should:

Place as little weight as possible over the axles.

Place a well-balanced amount of weight over the axles.

Not be concerned with how the weight is distributed.

A load of cargo must be properly balanced. Placing too much weight over an axle can damage the axle and make it more difficult for you to steer. Placing too little weight over an axle can cause poor traction, also leading to difficult handling.

2 . When making a left turn, you should start the turn:

Before reaching the center of the intersection.

No sooner than the center of the intersection.

After your rear wheels have passed the center of the intersection.

When making a left turn, you should wait until you reach the center of the intersection before actually beginning to turn. Due to off-tracking, the left side of your vehicle could hit another driver if you begin turning too early.

3 . You should ____ if the low pressure warning signal activates while you are driving.

Stop where you are and park

Exit the roadway as soon as safely possible

Continue driving normally

If the low pressure warning signal activates while you are driving, it is important that you safely exit the roadway as soon as possible and park your vehicle. If the air pressure gets too low, the brakes will no longer work well enough for you to stop safely.

4 . When alley docking, you should first:

Position your vehicle directly in front of the alley.

Back up directly in front of the alley.

Stop parallel to the outer boundary of the alley.

If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.

5 . If a load is 10 feet long, it must be secured by a minimum of ____ tie-downs.

Two

Three

Four

On flatbed trailers and trailers without sides, cargo must be tied down. There should be at least one tie-down for every 10 feet of cargo. Regardless of the size of the cargo, at least two tie-downs must be used.

6 . If there is a fire in your vehicle, you should not:

Park in an area away from buildings, trees, brush, and other vehicles.

Pull into a service station.

Notify emergency services of your problem and your location.

In the event of a vehicle fire, you should leave the road and stop in an open area. Do not pull into a service station as fuels at the service station could catch fire. Report the fire and your location to emergency services.

7 . What does an air compressor do in an air brake system?

It pumps air into the air storage tanks.

It fills the tires.

It moves air to the back of the truck.

In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Idaho | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Idaho, you must first possess a valid Idaho Commercial Driver's License (CDL). After that, you will need to pass the Hazardous Materials Endorsement Knowledge Test. Lastly, you should complete a federal security threat assessment application, provide fingerprints, and pass an FBI background check. The endorsement will be added to your CDL once approved.

To obtain a CDL Hazmat license, you must first have a valid Commercial Driver's License (CDL). You must be at least 21 years old and be able to read and speak English. You also need to pass a physical examination every two years. Lastly, you must pass the Hazardous Materials Endorsement Knowledge Test and an FBI background check.

When applying for a CDL Hazmat endorsement, you need to provide proof of U.S. citizenship or legal status, such as a birth certificate or passport. You also need your current Commercial Driver's License (CDL), proof of Idaho residency, and your Social Security Number. Finally, you'll need to complete a federal security threat assessment application and provide fingerprints for an FBI background check.

Yes, there is a dedicated written test for the CDL Hazmat endorsement in Idaho. This test assesses your knowledge on transporting hazardous materials safely. It covers topics such as loading and unloading, bulk packaging marking, driving and parking rules, and emergency response procedures. The Idaho Commercial Driver’s License Manual is a great resource to prepare for this test.

The written test for the CDL Hazmat endorsement covers a wide range of topics related to hazardous materials. These include identifying different types of hazardous materials, understanding shipping papers, placarding rules, loading and unloading procedures, handling emergencies and incidents, and understanding the associated risks and safety precautions when transporting hazardous materials.

Yes, obtaining a CDL Hazmat endorsement in Idaho involves extra charges. You'll need to pay a fee for the knowledge test, and there's also a fee for the endorsement itself. Additionally, the TSA background check carries a separate fee. The exact costs can vary, so it's recommended to check the current fees with your local DMV office or on their website.

Yes, to obtain a Hazmat endorsement in Idaho, the Transportation Security Administration (TSA) requires a federal background check and fingerprinting. This is to ensure the driver doesn't pose a security threat. The applicant must be a U.S. citizen or have legal status, and must not have committed certain crimes.

Yes, specialized training is required for a CDL Hazmat endorsement. Applicants must pass a written test on federal and state regulations for transporting hazardous materials. While it's not mandatory, many opt for professional training programs to prepare. After passing the test, a TSA background check is also required before the endorsement is granted.

No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Idaho. The endorsement ensures that drivers are trained and equipped to handle hazardous materials safely. Violating this requirement can lead to severe penalties, including fines and suspension or revocation of your commercial driver's license.

Yes, you can add the CDL Hazmat endorsement to your current CDL license. It doesn't require a new application for a CDL, but it does require passing a written test specific to Hazmat transportation, as well as a TSA background check. Once these are successfully completed, the Hazmat endorsement can be added to your existing CDL.