1 . The “No zone” is:

A term used to describe blind spots around a truck or bus.
A special speed zone.
A roadway with restrictions on vehicle stereo volume.
The television show that replaced The Twilight Zone.

2 . If you begin to feel tired while driving, the best thing to do is to:

Get some coffee.
Open your window.
Stop driving.
Turn on the radio.

3 . This sign means:

Keep right.
Low shoulder.
No parking at any time.
Lane ends.

4 . A person walking with a white cane or guide dog is likely to be:

A deaf person.
A person involved with a traffic study.
A blind person.
None of the above.

5 . When sharing the road with a truck, it is important to remember that trucks generally:

Require longer distances to stop than smaller vehicles do.
Require less time to pass on a downgrade than smaller vehicles do.
Require a smaller turning radius than smaller vehicles do.
Require less time to pass on an incline than smaller vehicles do.

6 . When you are being tailgated:

Move over to the right, if there is an open lane to your right.
If there is not an open lane to your right, wait until the way is clear ahead and reduce your speed slowly to encourage the tailgater to drive around you.
Never slow down abruptly.
All of the above.

7 . Defensive driving is:

Identifying dangerous driving situations and taking action to avoid accidents.
Defending yourself against poor drivers by getting ahead of them in traffic.
Following the vehicle ahead of you at a close distance.
Quickly changing lanes and shifting in and out of traffic congestion.

8 . This road sign means:

A steep grade is ahead.
You must turn left ahead.
Do not enter.
A four-way intersection is ahead.

9 . When passing on a multilane highway:

Be sure the passing lane is clear.
Pass only on the right.
Watch for oncoming traffic.
There is no need to signal.

10 . This sign tells you that:

No turns are allowed on this road.
The road narrows ahead.
There are a series of curves ahead.
The road may be slippery when wet.

11 . Which of the following is a safe way to drive through a curve?

Slow down as you enter, speed up as you exit.
Maintain a constant speed throughout the curve.
Speed up as you enter, slow down as you exit.
Stay near the right edge of your lane.

12 . When making a right turn at an intersection with a solid red light, you should:

Activate your turn signal and immediately turn.
Wait and turn right only after the light changes to green.
Come to a complete stop, yield the right-of-way to pedestrians and oncoming traffic, and turn right after the lane is clear.
Activate your hazard lights and turn right.

13 . This road sign means:

Roundabout ahead.
No passing zone.
Left turn yield on green.
Traffic signal ahead.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

14 . If you reach an intersection where you wish to turn but you are not in the proper lane, you should:

Quickly cut across traffic to make your turn.
Turn on your blinker and make the turn from your current lane.
Drive to the next intersection and make your turn then.
Safely change lanes then put your vehicle in reverse to go back to the intersection.

15 . If you need to stop quickly and your vehicle is not equipped with an Anti-Lock Braking System (ABS), you should:

Hold down the brake pedal.
Firmly pump your brakes.
Lightly tap the brakes.
Release the brake pedal.

16 . You are driving on a busy street and your vehicle’s accelerator sticks open. You should:

Blow your horn.
Slam on your brakes.
Turn on your four-way flashers.
Turn off your ignition, taking care not to engage the steering wheel locking mechanism.

17 . You may drive around the gates at a railroad crossing:

When the train has passed.
Under no circumstances.
When the lights have stopped flashing.
When other drivers drive around the gates.

18 . Unless posted otherwise, the speed limit on an open county highway is:

70 mph.
65 mph.
60 mph.
55 mph.

19 . If another vehicle is following you too closely, you should:

Press hard on your brakes.
Get behind them and turn on your high beam lights.
Tap your brakes gently, slow down, and let them pass.
Drive slowly and make sure they can’t pass you.

20 . Before turning left, it is important to:

Sound your horn.
Yield to oncoming vehicles.
Swing to the right side of your lane.
Wait until oncoming traffic has a red light.

21 . You are entering a crowded freeway. What should you do to merge into traffic?

Use your side and rearview mirrors and check your blind spots.
Use the acceleration lane to adjust your speed to match the speed of freeway traffic.
Yield to traffic already on the freeway.
All of the above.

22 . As you near an intersection, the traffic light changes from green to yellow. Your best action is to:

Speed up to beat the red light.
Apply the brakes sharply to stop.
Be prepared to stop in the center of the intersection.
Be prepared to stop before the intersection.

23 . You may honk your horn when you:

Have to stop quickly.
Are passing another car.
Have lost control of your car.
Are passing a bicyclist.

24 . Coming to a complete stop at an intersection, yielding to cross traffic/pedestrians, and then proceeding through the intersection when the way is clear corresponds with:

A solid red light.
A flashing yellow light.
A solid green light.
A flashing red light.

25 . Traffic signals sometimes display arrows to control turns from specific lanes. A solid red arrow:

Is never used as a traffic signal.
Has the same meaning as a circular red traffic light.
Means that drivers may turn in the direction indicated by the arrow.
Means that the traffic the arrow is pointing toward must stop.