1 . What should you do when an emergency vehicle is approaching while displaying flashing red or blue lights?

See if you can reach your destination before the emergency vehicle catches up to you.
Continue driving but try to stay out of its way.
Pull over to the side of the road and come to a complete stop.
Stop in the middle of an intersection.

2 . If your turn signals fail, you should use ____ to indicate that you are turning.

Your horn
Your headlights
Hand signals
Your emergency flashers

3 . Which of the following statements about railroad crossings is true?

It is against the law to go around lowered gates at a crossing.
You must stop at a railroad crossing when directed to do so by a flagger.
Not all railroad crossings are equipped with flashing red signals and gates.
All of the above.

4 . Coming to a complete stop at an intersection, yielding to cross traffic/pedestrians, and then proceeding through the intersection when the way is clear corresponds with:

A solid red light.
A flashing yellow light.
A solid green light.
A flashing red light.

5 . This road sign means:

When pavement is wet, reduce your speed.
The road ahead winds a series of turns or curves.
Traffic increases ahead.
Steep grade ahead.

6 . Work zone signs mean:

It is summer.
You must immediately stop and back up.
Less than ideal conditions are present for driving.
You should drive faster to get out of the work zone.

7 . This road sign means:

No right turn.
Curve.
Turn right or left.
Traffic flows only in the direction of the arrow.

8 . This road sign means:

Side road.
Keep to the side indicated by the arrow.
You may drive in the left lane.
You have the right-of-way.

9 . What should you be most concerned about when you see this sign?

Driving with your headlights out of alignment because one side of your car is higher than the other.
Damaging a tire from drifting onto the shoulder.
Hydroplaning, if the shoulder has water on it.
Losing control of the vehicle if you drift onto the shoulder.

10 . Remove all snow, frost, and ice from:

Just the windshield.
All windows.
Just the windshield and passenger window.

11 . If you stop along the road at night:

Turn off all your lights.
Use your parking lights only.
Use your headlights only.
Turn on your emergency flashers and leave your low beams turned on.

12 . If a traffic light shows both a red light and a green arrow, a driver may not turn in the direction of the arrow until the red light has changed.

True
False

13 . Increase your following distance when driving behind a large vehicle:

To better see around the sides of the vehicle.
Because other drivers tend to pull behind large vehicles before trying to pass them.
Because following too closely will get you caught in the vehicle's slipstream.

14 . How do you check your blind spots?

By looking in your side mirrors
By turning your head and looking over your shoulders
By looking in your rearview mirror
By staring straight ahead

15 . You may not complete a turnabout:

If it requires you to cross a double yellow line.
Where it may interfere with surrounding traffic.
Where hills and curves are nearby.
All of the above.

16 . When approaching an intersection with a flashing red light, you must:

Come to a complete stop, yield to oncoming traffic and pedestrians, then proceed.
Reduce your speed and proceed with caution.
Come to a complete stop and remain stopped as long as the light is red.
Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

17 . What is an important step in turning?

Check traffic in all directions.
Increase your speed.
Always move to the left lane.

18 . When passing another vehicle, you should return to your original lane when:

You can see both headlights of the passed vehicle in your rearview mirror.
You have cleared the front bumper of the passed vehicle.
You are 50 feet in front of the passed vehicle.

19 . When driving on slick roads, you should:

Take turns more slowly than usual.
Change lanes quickly.
Accelerate quickly.
Brake hard.

20 . If your car breaks down on a highway, you should:

Sit in your car and wait for help.
Use your four-way flashers to warn other drivers.
Sound your horn at passing motorists.
Flash your headlights at oncoming traffic.

21 . This sign means:

Trucks only.
Trucks are entering the highway.
Upcoming hill.
Trucks have the right-of-way.

22 . To prepare for anything coming up on the road ahead, you should:

Continually scan the entire road and all roadsides.
Stare straight ahead at all times.
Drive with your left foot resting lightly on the brake pedal.
Maintain focus toward the middle of the road.

23 . When merging onto the freeway, you should be driving:

At or near the speed of the freeway traffic.
At the legal speed limit.
More slowly than the freeway traffic.

24 . This sign means:

Do not enter.
Stop ahead.
Roadwork or maintenance is present.

25 . Emergency vehicles:

Have the right-of-way when using sirens, horns, and/or flashing lights.
May use a loudspeaker to give instructions.
May follow each other.
All of the above.

26 . If weather or light conditions require you to have your lights on while driving:

Use your parking lights.
Use your high beams.
Use your low beams.

27 . When driving at night, using only your parking lights is unlawful.

True
False

28 . You may be able to identify an aggressive driver by:

Their erratic and improper lane changes.
The number of passengers in their car.
Their tendency to drive slowly.

29 . The posted speed limit shows:

Only a recommended driving speed.
The exact speed at which you must travel to avoid a ticket.
The maximum safe driving speed under ideal road and weather conditions.
The maximum safe driving speed under all road conditions.

30 . This sign means:

Steep downgrade.
Crossroad ahead.
No right turn.
Narrow bridge.